Jotul F 50 TL Rangeley Operating Instructions
![Jotul F 50 TL Rangeley Stove manual cover](/images/lllBnzpZDQquMeYAgySRDpfz/thumbs/thumb175x175.webp)
To ignite the Jotul F 50 TL Rangeley Stove, start by opening the air control fully. Place kindling and small pieces of wood in the stove and use a match or lighter to ignite. Gradually add larger pieces of wood as the fire establishes.
To clean the glass, first ensure the stove is completely cool. Use a soft cloth and a specialized stove glass cleaner or a vinegar-water solution. Avoid abrasive materials which can scratch the glass.
Regular maintenance should be done before the heating season starts. This includes checking seals, cleaning the flue, and inspecting the firebox and baffle for wear or damage.
If excessive smoke is produced, check that the air control is open. Ensure the wood is dry and seasoned. Also, confirm there are no blockages in the chimney or flue.
To improve efficiency, use well-seasoned hardwood, maintain a clean chimney, and ensure the stove's gaskets and seals are in good condition. Adjust the air control to optimize combustion.
If the top loader door does not close properly, check for obstructions or debris around the seal. Inspect the hinges and latch mechanism for damage or wear. Adjust or replace parts as necessary.
If you notice a crack in the firebox, discontinue use immediately and consult a professional for repair or replacement. Operating with a damaged firebox is unsafe.
To replace the baffle, first ensure the stove is cool and remove the firebricks. Carefully lift out the damaged baffle and insert the new one, ensuring it is seated correctly. Reposition the firebricks after installation.
Use well-seasoned hardwood such as oak, maple, or birch for optimal performance. Wood should be split and dried for at least one year to ensure low moisture content.
For poor draft issues, check for blockages in the chimney, ensure the chimney is of adequate height, and confirm that the air control is not obstructed. Weather conditions and room ventilation can also affect draft.