Jonsered LT2213 A 96041008800 Parts Manual

To start the Jonsered LT2213 A, ensure that the parking brake is engaged, the gear lever is in neutral, and the blade lever is disengaged. Turn the ignition key to the start position and release it when the engine starts.
It is recommended to change the oil every 50 hours of operation or at least once per mowing season, whichever comes first. Always use the type of oil specified in the manual.
Check the fuel level, ensure the spark plug is connected, and verify that the air filter is clean. Also, make sure the battery is charged and the ignition system is functioning properly.
Use clean, fresh unleaded gasoline with a minimum of 87 octane. Avoid using gasoline with more than 10% ethanol content.
Regularly check and sharpen the blades to ensure clean cuts. Replace the blades if they show signs of damage or excessive wear. Balancing the blades after sharpening is also crucial.
Excessive vibration may be caused by an unbalanced blade, loose parts, or engine issues. Check for debris in the blade area, tighten any loose parts, and ensure the blades are balanced.
Remove the air filter cover, take out the filter, and clean it using compressed air or wash it with mild detergent and water. Ensure the filter is completely dry before reinstalling.
Regular maintenance includes checking and changing the oil, cleaning or replacing the air filter, inspecting the spark plug, sharpening the blades, and checking tire pressure.
Clean the mower thoroughly, change the oil, empty the fuel tank, and remove the battery. Store the mower in a dry, sheltered area to prevent rust and damage.
Ensure that the tires are inflated evenly, the deck is level, and the blades are sharp and properly installed. Adjust the deck height as needed for an even cut.