Jonsered Frontriders FR2216 MA 4x4 Parts Manual

To start the Jonsered Frontriders FR2216 MA 4x4, first ensure that the parking brake is engaged, the blades are disengaged, and the transmission is in neutral. Turn the ignition key to the 'start' position, and release it once the engine starts.
The recommended maintenance schedule includes checking the oil level before each use, changing the oil every 50 hours of operation, replacing the air filter annually, and sharpening the blades every 25 hours of mowing.
If the mower won't start, check the fuel level, ensure the battery is charged, verify that the spark plug is clean and properly connected, and make sure the safety switches are engaged.
Use SAE 30 oil for temperatures above 32°F (0°C) and SAE 5W-30 for colder conditions. Always refer to the owner's manual for detailed recommendations.
To adjust the cutting height, use the height adjustment lever located near the driver's seat. Select the desired height by moving the lever into one of the available slots.
If the mower is leaking oil, inspect for loose or damaged oil drain plugs, oil filters, or oil seals. Tighten any loose components and replace damaged parts as necessary.
To change the blades, first ensure the mower is off and the key is removed. Lift the mower deck, remove the blade bolts with a wrench, replace the blades, and securely fasten the bolts.
If the battery is not charging, check the battery connections for corrosion, ensure the alternator belt is intact, and test the voltage regulator. Replace any faulty components.
Remove the air filter cover, take out the filter, and gently clean it with compressed air or soapy water. Allow it to dry completely before reinstalling. Replace if excessively dirty or damaged.
For off-season storage, clean the mower thoroughly, drain the fuel or add a fuel stabilizer, change the oil, and disconnect the battery. Store in a dry, sheltered area.