Jonsered FR2116 MA 2 965 07 01-01 Parts Manual
![Jonsered FR2116 MA 2 965 07 01-01 Lawn Mower manual cover](/images/jbKVfNKTZALTIBtIHTydCqdm/thumbs/thumb175x175.webp)
Ensure the mower is on a flat surface, engage the parking brake, set the throttle to 'fast', and turn the ignition key to start the engine.
Check the fuel level, ensure the spark plug is connected, and verify that the battery is charged. If the problem persists, consult the user manual or contact a service professional.
It's recommended to change the oil after the first 5 hours of use and then every 50 hours of operation or at the beginning of each mowing season.
Use regular unleaded gasoline with a minimum octane rating of 87. Avoid using ethanol blends higher than 10%.
Locate the cutting height adjustment lever on the mower deck. Move the lever to the desired cutting height position.
Ensure the blades are sharp and properly installed, check that the deck is clean, and verify the cutting height is set appropriately for your grass type.
Clean the mower thoroughly, change the oil, inspect and replace the air filter if needed, remove the battery and store it in a cool, dry place, and sharpen or replace the blades.
Keep the blades sharp, maintain proper tire pressure, ensure the engine is tuned, and avoid mowing when grass is wet or too long.
Check for tire pressure consistency, ensure the mower deck is level, and inspect the blades for sharpness and correct installation.
Excessive vibration may indicate an unbalanced blade, loose parts, or debris lodged in the mower deck. Inspect and clean the mower, tighten any loose components, and balance or replace the blades if necessary.