Husqvarna Z254 96732410100 Operator's Manual
![Husqvarna Z254 96732410100 Lawn Mower manual cover](/images/YufkfasowetRmxskxceDVWIF/thumbs/thumb175x175.webp)
To start the Husqvarna Z254, ensure the parking brake is engaged, the PTO switch is in the off position, and the throttle is set to choke. Turn the ignition key to the start position until the engine starts and then release the key.
Use unleaded gasoline with a minimum octane rating of 87 and a maximum ethanol content of 10% (E10) for optimal performance.
Change the engine oil after the first 5 hours of use, then every 50 hours of operation or at least once a season.
Check if the PTO switch is in the on position. Ensure the drive belt is not broken or slipping and that the battery is fully charged.
Use the deck lift lever located on the mower. Move the lever forward or backward to adjust the cutting height to the desired level.
Ensure the blades are sharp and not damaged. Check the deck for any obstructions and ensure the ground speed is appropriate for the grass conditions.
Remove the air filter cover, take out the air filter, and gently clean any debris. If it's a paper filter, tap it gently to remove dirt. If it's foam, wash with mild detergent and water, then dry thoroughly.
Check the battery charge, ensure the fuel is fresh and the fuel filter is clean. Inspect the spark plug for wear or damage and replace if necessary.
Regularly check the tire pressure and inflate them to the recommended PSI as indicated in the user manual. Inspect for wear or damage and replace if necessary.
Clean the mower thoroughly, change the oil, and remove the battery for storage in a cool, dry place. Add a fuel stabilizer to the fuel tank and store the mower in a dry area.