Contents

1 MEANS OF REPRESENTATION
- 1.1 Symbols used
- 1.2 Formats used
2 SAFETY ADVICE
- 2.1 Use definition intended use
- 2.2 Misuse
- 2.3 Safety advice
- 2.4 Degrees of risk and symbols
- 2.5 Tampering warning
- 2.6 Safe operation
- 2.7 Protective clothing
- 2.8 Work rules
- 2.9 Environment
- 2.10 Owner's Manual
3 IMPORTANT NOTES
- 3.1 Manufacturer warranty, implied warranty
- 3.2 Fuel, auxiliary substances
- 3.3 Spare parts, Husqvarna Motorcycles technical accessories
- 3.4 Service
- 3.5 Figures
- 3.6 Customer service
4 VIEW OF VEHICLE
- 4.1 View of vehicle, front left (example)
- 4.2 View of vehicle, rear right (example)
5 SERIAL NUMBERS
- 5.1 Vehicle identification number
- 5.2 Type label (All EU/AR/CN standard models)
- 5.3 Key number (All EU/AR standard models)
- 5.4 Engine number
- 5.5 Fork article number
- 5.6 Shock absorber article number
6 CONTROLS
- 6.1 Clutch lever
- 6.2 Hand brake lever
- 6.3 Throttle grip
- 6.4 Stop button (All EU/AR/CN standard models)
- 6.5 Stop button (All US standard models)
- 6.6 Horn button (All EU/AR standard models)
- 6.7 Light switch (All EU/AR/CN standard models)
- 6.8 Light switch (All US standard models)
- 6.9 Turn signal switch (All EU/AR standard models)
- 6.10 Emergency OFF switch (All EU/AR/CN standard models)
- 6.11 Start button (All US standard models)
- 6.12 Start button (All EU/AR/CN standard models)
- 6.13 Map switch
- 6.14 Overview of indicator lights (All EU/AR/CN standard models)
- 6.15 Overview of indicator lamps (All US standard models)
- 6.16 Opening fuel tank filler cap
- 6.17 Closing the fuel tank filler cap
- 6.18 Opening 2-stroke oil tank cap
- 6.19 Closing 2-stroke oil tank cap
- 6.20 Cold start button
- 6.21 Idle speed adjusting screw
- 6.22 Shift lever
- 6.23 Foot brake lever
- 6.24 Side stand
- 6.25 Steering lock (All EU/AR standard models)
- 6.26 Locking the steering (All EU/AR standard models)
- 6.27 Unlocking the steering (All EU/AR standard models)
7 COMBINATION INSTRUMENT
- 7.1 Overview
- 7.2 Activation
- 7.3 Messages on the combination instrument
- 7.4 Adjusting the combination instrument
- 7.5 Setting the kilometers or miles
- 7.6 Setting the clock
- 7.7 Setting the service display
- 7.8 Speed, time, and DST distance 1
- 7.9 Speed, time, and DST2 distance 2
- 7.10 AVG average speed, ART operating hours, and ODO total distance covered
8 PREPARING FOR USE
- 8.1 Advice on preparing for first use
- 8.2 Running in the engine
- 8.3 Starting power of lithium-ion batteries at low temperatures
- 8.4 Preparing the vehicle for difficult operating conditions
- 8.5 Preparing the vehicle for rides on dry sand
- 8.6 Preparing the vehicle for rides on wet sand
- 8.7 Preparing the vehicle for rides on wet and muddy circuits
- 8.8 Preparing vehicle for high temperatures or slow riding
- 8.9 Preparing the vehicle for low temperatures or snow
9 RIDING INSTRUCTIONS
- 9.1 Checks and maintenance measures when preparing for use
- 9.2 Starting the vehicle
- 9.3 Starting off
- 9.4 Shifting, riding
- 9.5 Braking
- 9.6 Stopping, parking
- 9.7 Transporting
- 9.8 Refueling
- 9.9 Adding 2-stroke oil
10 SERVICE SCHEDULE
- 10.1 Additional information
- 10.2 Required work
- 10.3 Recommended work
11 TUNING THE CHASSIS
- 11.1 Checking the basic chassis setting with rider's weight
- 11.2 Compression damping of the shock absorber
- 11.3 Adjusting the low-speed compression damping of the shock absorber
- 11.4 Adjusting the high-speed compression damping of the shock absorber
- 11.5 Adjusting the rebound damping of the shock absorber
- 11.6 Measuring the dimension of the rear wheel unloaded
- 11.7 Checking the static sag of the shock absorber
- 11.8 Checking the riding sag of the shock absorber
- 11.9 Adjusting the spring preload of the shock absorber
- 11.10 Adjusting the riding sag
- 11.11 Checking the basic setting of the fork
- 11.12 Adjusting the compression damping of the fork
- 11.13 Adjusting the rebound damping of the fork
- 11.14 Adjusting the spring preload of the fork
- 11.15 Handlebar position
- 11.16 Adjusting the handlebar position
12 SERVICE WORK ON THE CHASSIS
- 12.1 Raising the motorcycle with a lift stand
- 12.2 Removing the motorcycle from the lift stand
- 12.3 Bleeding the fork legs
- 12.4 Cleaning the dust boots of the fork legs
- 12.5 Removing the fork legs
- 12.6 Installing the fork legs
- 12.7 Removing the fork protector
- 12.8 Installing the fork protector
- 12.9 Removing the lower triple clamp
- 12.10 Installing the lower triple clamp
- 12.11 Checking the steering head bearing play
- 12.12 Adjusting steering head bearing play
- 12.13 Lubricating the steering head bearing
- 12.14 Removing front fender
- 12.15 Installing front fender
- 12.16 Removing the shock absorber
- 12.17 Installing the shock absorber
- 12.18 Removing the seat
- 12.19 Mounting the seat
- 12.20 Removing the air filter box cover
- 12.21 Installing the air filter box cover
- 12.22 Removing the air filter
- 12.23 Cleaning the air filter and air filter box
- 12.24 Installing the air filter
- 12.25 Removing the main silencer
- 12.26 Installing the main silencer
- 12.27 Changing the glass fiber yarn filling of the main silencer
- 12.28 Removing the right side cover
- 12.29 Installing the right side cover
- 12.30 Removing the fuel tank
- 12.31 Installing the fuel tank
- 12.32 Checking the chain for dirt
- 12.33 Cleaning the chain
- 12.34 Checking the chain tension
- 12.35 Adjusting the chain tension
- 12.36 Checking the chain, rear sprocket, engine sprocket, and chain guide
- 12.37 Checking the frame
- 12.38 Checking the link fork
- 12.39 Checking the throttle cable routing
- 12.40 Checking the rubber grip
- 12.41 Adjusting the basic position of the clutch lever
- 12.42 Checking/correcting the fluid level of hydraulic clutch
- 12.43 Changing the hydraulic clutch fluid
- 12.44 Removing the engine guard
- 12.45 Installing the engine guard
13 BRAKE SYSTEM
- 13.1 Adjusting the basic position of the hand brake lever
- 13.2 Checking the brake discs
- 13.3 Checking the front brake fluid level
- 13.4 Adding front brake fluid
- 13.5 Checking the front brake linings
- 13.6 Changing the brake linings of the front brake
- 13.7 Checking the free travel of the foot brake lever
- 13.8 Adjusting the basic position of the foot brake lever
- 13.9 Checking the rear brake fluid level
- 13.10 Adding rear brake fluid
- 13.11 Checking the brake linings of the rear brake
- 13.12 Changing the rear brake linings
14 WHEELS, TIRES
- 14.1 Removing the front wheel
- 14.2 Installing the front wheel
- 14.3 Removing the rear wheel
- 14.4 Installing the rear wheel
- 14.5 Checking the tire condition
- 14.6 Checking tire pressure
- 14.7 Checking spoke tension
15 ELECTRICAL SYSTEM
- 15.1 Removing the 12-V battery
- 15.2 Installing the 12-V battery
- 15.3 Charging the 12-V battery
- 15.4 Changing main fuse
- 15.5 Changing the fuses of individual electrical power consumers
- 15.6 Removing the headlight mask with the headlight
- 15.7 Installing the headlight mask with the headlight
- 15.8 Changing the headlight bulb
- 15.9 Changing the turn signal bulb (All EU/AR standard models)
- 15.10 Checking the headlight setting
- 15.11 Adjusting the headlight range
- 15.12 Changing the combination instrument battery
- 15.13 Diagnostics connector
16 COOLING SYSTEM
- 16.1 Cooling system
- 16.2 Checking the antifreeze and coolant level
- 16.3 Checking the coolant level
- 16.4 Draining the coolant
- 16.5 Refilling with coolant
- 16.6 Changing the coolant
17 TUNING THE ENGINE
- 17.1 Checking the play in the throttle cable
- 17.2 Adjusting the play in the throttle cable
- 17.3 Setting the characteristic map of the throttle response
- 17.4 Adjusting the idle speed
- 17.5 Programming ambient air pressure
- 17.6 Checking the basic position of the shift lever
- 17.7 Adjusting the basic position of the shift lever
18 SERVICE WORK ON THE ENGINE
- 18.1 Changing the fuel screen
- 18.2 Checking 2-stroke oil level
- 18.3 Priming oil pump
- 18.4 Cleaning the oil screen in the oil tank
- 18.5 Checking the gear oil level
- 18.6 Changing the gear oil
- 18.7 Adding the gear oil
19 CLEANING, CARE
- 19.1 Cleaning the motorcycle
- 19.2 Checks and maintenance steps for winter operation
20 STORAGE
- 20.1 Storage
- 20.2 Preparing for use after storage
21 TROUBLESHOOTING
22 BLINK CODE
23 TECHNICAL DATA
- 23.1 Engine
  - 23.1.1 All TE 250 models
  - 23.1.2 All TE 300 models
- 23.2 Engine tightening torques
- 23.3 Capacities
  - 23.3.1 Gear oil
  - 23.3.2 Coolant
  - 23.3.3 Fuel
- 23.4 Chassis
- 23.5 Electrical system
- 23.6 Tires
- 23.7 Fork
- 23.8 Shock absorber
- 23.9 Chassis tightening torques
24 SUBSTANCES
25 AUXILIARY SUBSTANCES
26 STANDARDS
27 INDEX OF SPECIAL TERMS
28 LIST OF ABBREVIATIONS
29 LIST OF SYMBOLS
- 29.1 Red symbols
- 29.2 Yellow and orange symbols
- 29.3 Green and blue symbols
INDEX
- 1
- 2
- A
- B
- C
- D
- E
- F
- G
- H
- I
- K
- L
- M
- O
- P
- R
- S
- T
- U
- V
- W

Husqvarna TE 250 2023 Owner's Manual

Husqvarna TE 250 2023 Motorcycle manual cover

Pages 169

Year 2023

Language(s)

of 169

Husqvarna TE 250 2023 Motorcycle Specification

The Husqvarna TE 250 2023 model is a high-performance enduro motorcycle designed for both competitive racing and recreational off-road riding. It is powered by a 249cc single-cylinder, 2-stroke engine, which integrates an innovative fuel injection system to ensure crisp throttle response and efficient fuel consumption. The engine is paired with a 6-speed gearbox that provides smooth and precise gear shifts, optimized for a wide range of terrains.

The frame is made from high-grade chromium molybdenum steel, enhancing durability while maintaining a lightweight structure. The motorcycle features a WP XPLOR front fork and a WP XACT rear shock absorber, both fully adjustable to cater to various riding conditions and preferences. The suspension system offers superior handling and stability, making the TE 250 adept at navigating rough trails and obstacles.

For braking, the TE 250 is equipped with high-performance Brembo hydraulic disc brakes, providing exceptional stopping power and control. The front brake disc measures 260 mm, while the rear disc is 220 mm, ensuring balanced and reliable braking performance.

The bike's ergonomics are designed for optimal rider comfort and control. The seat height is set at 950 mm, and the ground clearance is 360 mm, allowing for excellent maneuverability. The motorcycle's lightweight design, with a dry weight of approximately 105 kg, contributes to its agility and ease of handling.

Additionally, the TE 250 includes advanced features such as electric start, a lightweight lithium-ion battery, and a multifunctional digital display that provides essential information at a glance. The fuel tank has a capacity of 9.0 liters, ensuring ample range for extended rides.

Overall, the Husqvarna TE 250 2023 combines cutting-edge technology, robust engineering, and rider-focused design to deliver an exceptional enduro riding experience.

Husqvarna TE 250 2023 Motorcycle F.A.Q.

What is the recommended oil type for the Husqvarna TE 250 2023?

The recommended oil type for the Husqvarna TE 250 2023 is a high-quality synthetic 2-stroke engine oil, specifically designed for high-performance engines.

How often should I change the air filter on my Husqvarna TE 250 2023?

The air filter on the Husqvarna TE 250 2023 should be checked and cleaned after every ride, especially in dusty conditions, and replaced if necessary to ensure optimal performance.

What is the correct tire pressure for the Husqvarna TE 250 2023?

For the Husqvarna TE 250 2023, the recommended tire pressure is generally around 12-15 psi for off-road conditions. However, this can vary based on terrain and rider preference.

How can I troubleshoot starting issues with my Husqvarna TE 250 2023?

If your Husqvarna TE 250 2023 is experiencing starting issues, check the spark plug for wear or fouling, ensure the fuel is fresh, inspect the fuel lines for blockages, and verify the battery is fully charged.

What regular maintenance does the Husqvarna TE 250 2023 require?

Regular maintenance for the Husqvarna TE 250 2023 includes changing the oil every 10 hours of riding, checking and adjusting the chain tension, inspecting the brake pads, and checking the coolant level.

How do I adjust the suspension on the Husqvarna TE 250 2023 for different terrains?

To adjust the suspension on the Husqvarna TE 250 2023, use the compression and rebound clickers found on the forks and shock absorber. Adjust these settings to suit the specific terrain and your riding style.

What should I do if the brakes on my Husqvarna TE 250 2023 feel spongy?

If the brakes feel spongy, check for air in the brake lines and bleed the brakes if necessary. Also, inspect the brake pads and fluid level to ensure they are in good condition.

How can I improve the fuel efficiency of my Husqvarna TE 250 2023?

To improve fuel efficiency on the Husqvarna TE 250 2023, maintain a steady riding speed, keep the engine well-tuned, ensure the air filter is clean, and use the recommended oil type and fuel grade.

What is the break-in procedure for a new Husqvarna TE 250 2023 engine?

The break-in procedure for a new Husqvarna TE 250 2023 involves riding at varying speeds and loads for the first 3 hours, avoiding high RPMs, and performing an oil change after the initial break-in period.

How do I store my Husqvarna TE 250 2023 for the winter?

To store your Husqvarna TE 250 2023 for the winter, clean the bike thoroughly, drain the fuel or add a stabilizer, disconnect the battery, and store it in a dry, temperature-controlled environment.