Contents

1 MEANS OF REPRESENTATION
- 1.1 Symbols used
- 1.2 Formats used
2 SAFETY ADVICE
- 2.1 Use definition intended use
- 2.2 Misuse
- 2.3 Safety advice
- 2.4 Degrees of risk and symbols
- 2.5 Tampering warning
- 2.6 Safe operation
- 2.7 Protective clothing
- 2.8 Work rules
- 2.9 Environment
- 2.10 Owner's Manual
3 IMPORTANT NOTES
- 3.1 Manufacturer warranty, implied warranty
- 3.2 Fuel, auxiliary substances
- 3.3 Spare parts, accessories
- 3.4 Service
- 3.5 Figures
- 3.6 Customer service
4 VIEW OF VEHICLE
- 4.1 View of vehicle, front left (example)
- 4.2 View of vehicle, rear right (example)
5 SERIAL NUMBERS
- 5.1 Vehicle identification number
- 5.2 Type label (EU)
- 5.3 Key number (EU)
- 5.4 Engine number
- 5.5 Fork part number
- 5.6 Shock absorber article number
6 CONTROLS
- 6.1 Clutch lever
- 6.2 Hand brake lever
- 6.3 Throttle grip
- 6.4 Stop button
- 6.5 Horn button (EU)
- 6.6 Light switch
- 6.7 Turn signal switch (EU)
- 6.8 Emergency OFF switch (EU)
- 6.9 Start button
- 6.10 Combination switch
- 6.11 Overview of indicator lamps (EU)
- 6.12 Overview of indicator lights (CN)
- 6.13 Opening fuel tank filler cap
- 6.14 Closing the fuel tank filler cap
- 6.15 Cold start button
- 6.16 Idle speed adjusting screw
- 6.17 Shift lever
- 6.18 Foot brake lever
- 6.19 Side stand
- 6.20 Steering lock (EU)
- 6.21 Locking the steering (EU)
- 6.22 Unlocking the steering (EU)
7 COMBINATION INSTRUMENT
- 7.1 Combination instrument overview
- 7.2 Activation
- 7.3 Message on the combination instrument
- 7.4 Setting the combination instrument
- 7.5 Adjusting the kilometers or miles
- 7.6 Setting the clock
- 7.7 Setting the service display
- 7.8 Speed, time, and DST distance 1
- 7.9 Speed, time, and DST2 distance 2
- 7.10 AVG average speed, ART operating hours, and ODO total distance covered
8 PREPARING FOR USE
- 8.1 Advice on preparing for first use
- 8.2 Running-in the engine
- 8.3 Starting power of lithium-ion batteries at low temperatures
- 8.4 Preparing the vehicle for difficult operating conditions
- 8.5 Preparing the vehicle for riding on dry sand
- 8.6 Preparing the vehicle for riding on wet sand
- 8.7 Preparing the vehicle for riding on wet and muddy circuits
- 8.8 Preparing vehicle for high temperatures or slow riding
- 8.9 Preparing the vehicle for low temperatures or snow
9 RIDING INSTRUCTIONS
- 9.1 Checks and maintenance measures when preparing for use
- 9.2 Starting the vehicle
- 9.3 Activating traction control
- 9.4 Starting off
- 9.5 Shifting, riding
- 9.6 Braking
- 9.7 Stopping, parking
- 9.8 Transporting
- 9.9 Refueling
10 SERVICE SCHEDULE
- 10.1 Additional information
- 10.2 Required work
- 10.3 Recommended work
11 TUNING THE CHASSIS
- 11.1 Checking the basic chassis setting with rider's weight
- 11.2 Compression damping of the shock absorber
- 11.3 Adjusting the low-speed compression damping of the shock absorber
- 11.4 Adjusting the high-speed compression damping of the shock absorber
- 11.5 Adjusting the rebound damping of the shock absorber
- 11.6 Measuring the dimension of the rear wheel unloaded
- 11.7 Checking the static sag of the shock absorber
- 11.8 Checking the riding sag of the shock absorber
- 11.9 Adjusting the spring preload of the shock absorber
- 11.10 Adjusting the riding sag
- 11.11 Checking the basic setting of the fork
- 11.12 Adjusting the compression damping of the fork
- 11.13 Adjusting the rebound damping of the fork
- 11.14 Adjusting the spring preload of the fork
- 11.15 Handlebar position
- 11.16 Adjusting the handlebar position
12 SERVICE WORK ON THE CHASSIS
- 12.1 Raising the motorcycle with a lift stand
- 12.2 Removing the motorcycle from the lift stand
- 12.3 Bleeding the fork legs
- 12.4 Cleaning the dust boots of the fork legs
- 12.5 Removing the fork protector
- 12.6 Installing the fork protector
- 12.7 Removing the fork legs
- 12.8 Installing the fork legs
- 12.9 Removing the lower triple clamp
- 12.10 Installing the lower triple clamp
- 12.11 Checking the steering head bearing play
- 12.12 Adjusting the steering head bearing play
- 12.13 Lubricating the steering head bearing
- 12.14 Removing front fender
- 12.15 Installing front fender
- 12.16 Removing the shock absorber
- 12.17 Installing the shock absorber
- 12.18 Removing the seat
- 12.19 Mounting the seat
- 12.20 Removing the air filter box cover
- 12.21 Installing the air filter box cover
- 12.22 Removing the air filter
- 12.23 Installing the air filter
- 12.24 Cleaning the air filter and air filter box
- 12.25 Removing the right side cover
- 12.26 Installing the right side cover
- 12.27 Removing the main silencer
- 12.28 Installing the main silencer
- 12.29 Changing the glass fiber yarn filling in the main silencer
- 12.30 Removing the fuel tank
- 12.31 Installing the fuel tank
- 12.32 Checking for chain dirt accumulation
- 12.33 Cleaning the chain
- 12.34 Checking the chain tension
- 12.35 Adjusting the chain tension
- 12.36 Checking the chain, rear sprocket, engine sprocket, and chain guide
- 12.37 Checking the frame
- 12.38 Checking the link fork
- 12.39 Checking the throttle cable routing
- 12.40 Checking the rubber grip
- 12.41 Adjusting the basic position of the clutch lever
- 12.42 Checking/correcting the fluid level of hydraulic clutch
- 12.43 Changing the hydraulic clutch fluid
- 12.44 Removing the engine guard
- 12.45 Installing the engine guard
13 BRAKE SYSTEM
- 13.1 Adjusting the basic position of the hand brake lever
- 13.2 Checking the brake discs
- 13.3 Checking the front brake fluid level
- 13.4 Adding front brake fluid
- 13.5 Checking the front brake linings
- 13.6 Changing the brake linings of the front brake
- 13.7 Checking the free travel of foot brake lever
- 13.8 Adjusting the basic position of the foot brake lever
- 13.9 Checking the rear brake fluid level
- 13.10 Adding rear brake fluid
- 13.11 Checking the rear brake linings
- 13.12 Changing the rear brake linings
14 WHEELS, TIRES
- 14.1 Removing the front wheel
- 14.2 Installing the front wheel
- 14.3 Removing the rear wheel
- 14.4 Installing the rear wheel
- 14.5 Checking the tire condition
- 14.6 Checking tire pressure
- 14.7 Checking spoke tension
15 ELECTRICAL SYSTEM
- 15.1 Removing the 12-V battery
- 15.2 Installing the 12-V battery
- 15.3 Charging the 12-V battery
- 15.4 Changing main fuse
- 15.5 Changing the fuses of individual electrical power consumers
- 15.6 Removing the headlight mask with the headlight
- 15.7 Installing the headlight mask with the headlight
- 15.8 Changing the headlight bulb
- 15.9 Changing the turn signal bulb (EU)
- 15.10 Checking the headlight setting
- 15.11 Adjust the headlight range.
- 15.12 Changing the combination instrument battery
- 15.13 Diagnostics connector
16 COOLING SYSTEM
- 16.1 Cooling system
- 16.2 Checking the antifreeze and coolant level
- 16.3 Checking the coolant level
- 16.4 Draining the coolant
- 16.5 Refilling with coolant
- 16.6 Changing the coolant
17 TUNING THE ENGINE
- 17.1 Checking the play in the throttle cable
- 17.2 Adjusting the play in the throttle cable
- 17.3 Adjusting the characteristic map of the throttle response
- 17.4 Changing the mapping
- 17.5 Adjusting the idle speed
- 17.6 Programming the throttle valve position
- 17.7 Checking the basic position of the shift lever
- 17.8 Adjusting the basic position of the shift lever
18 SERVICE WORK ON THE ENGINE
- 18.1 Changing the fuel screen
- 18.2 Checking the engine oil level
- 18.3 Changing the engine oil and oil filter, cleaning the oil screen
- 18.4 Adding engine oil
19 CLEANING, CARE
- 19.1 Cleaning the motorcycle
- 19.2 Checks and maintenance steps for winter operation
20 STORAGE
- 20.1 Storage
- 20.2 Preparing for use after storage
21 TROUBLESHOOTING
22 BLINK CODE
23 TECHNICAL DATA
- 23.1 Engine
- 23.2 Engine tightening torques
- 23.3 Capacities
  - 23.3.1 Engine oil
  - 23.3.2 Coolant
  - 23.3.3 Fuel
- 23.4 Chassis
- 23.5 Electrical system
- 23.6 Tires
- 23.7 Fork
- 23.8 Shock absorber
- 23.9 Chassis tightening torques
24 SUBSTANCES
25 AUXILIARY SUBSTANCES
26 STANDARDS
27 INDEX OF SPECIAL TERMS
28 LIST OF ABBREVIATIONS
29 LIST OF SYMBOLS
- 29.1 Yellow and orange symbols
- 29.2 Green and blue symbols
INDEX
- 1
- A
- B
- C
- D
- E
- F
- H
- I
- K
- L
- M
- O
- P
- R
- S
- T
- V
- W

Husqvarna FE 250 2023 Owner's Manual

Husqvarna FE 250 2023 Motorcycle manual cover

Pages 164

Year 2023

Language(s)

of 164

Husqvarna FE 250 2023 Motorcycle Specification

The Husqvarna FE 250 2023 is a high-performance off-road motorcycle that combines advanced engineering with cutting-edge technology to deliver exceptional power, agility, and durability. It is equipped with a 249.9cc, single-cylinder, four-stroke engine that features a compact and lightweight design, ensuring optimal power delivery and throttle response. The engine is paired with a six-speed transmission and a DDS (Damped Diaphragm Steel) clutch, providing smooth and precise shifting under various riding conditions.

The FE 250 2023 boasts a chromium molybdenum steel frame, which offers an excellent balance of rigidity and flexibility, enhancing rider feedback and overall handling. The subframe is made from composite materials, contributing to the bike's lightweight construction without compromising strength. The suspension system includes a WP XPLOR front fork with 48mm tubes and a WP XACT rear shock, both fully adjustable for compression and rebound damping, ensuring superior performance across diverse terrains.

Ergonomically designed for comfort and control, the FE 250 2023 features a slim profile, adjustable handlebars, and a low seat height. The bike is fitted with high-quality components, including Brembo brakes for reliable stopping power, a ProTaper handlebar, and ODI lock-on grips. The exhaust system is engineered for optimal performance while meeting strict noise and emission regulations.

The motorcycle's electronics package includes a multifunctional digital display, electric start, and an advanced engine management system with selectable maps tailored for different riding scenarios. Additionally, the FE 250 2023 is equipped with a Lithium-Ion battery, reducing overall weight and enhancing starting reliability. This model also features a high-capacity fuel tank, ensuring extended riding intervals without frequent refueling.

Overall, the Husqvarna FE 250 2023 is a meticulously crafted off-road machine, designed to meet the demands of professional and amateur riders alike, offering an unparalleled combination of power, agility, and durability.

Husqvarna FE 250 2023 Motorcycle F.A.Q.

What type of fuel is recommended for the Husqvarna FE 250 2023?

The Husqvarna FE 250 2023 is recommended to use unleaded gasoline with an octane rating of 95 RON or higher.

How often should I change the oil in my Husqvarna FE 250 2023?

It is recommended to change the oil every 15 hours of riding or every 1,000 kilometers, whichever comes first.

What is the correct tire pressure for the Husqvarna FE 250 2023?

The recommended tire pressure is 1.0 bar (14.5 psi) for the front tire and 1.0 bar (14.5 psi) for the rear tire, but this can vary based on terrain and rider preference.

How do I adjust the suspension settings on my Husqvarna FE 250 2023?

To adjust the suspension, use the clickers located on the forks and shock absorber. Refer to the user manual for specific settings based on your riding conditions and weight.

What should I do if my Husqvarna FE 250 2023 won't start?

Check the fuel level, ensure the kill switch is in the run position, and inspect the battery connections. If the problem persists, consult a Husqvarna dealer.

How do I clean the air filter on the Husqvarna FE 250 2023?

Remove the seat, take out the air filter, wash it in warm soapy water, rinse, and let it dry completely before re-oiling and reinstalling it.

What are the maintenance intervals for the chain on the Husqvarna FE 250 2023?

The chain should be cleaned, lubricated, and checked for tension every 5 hours of riding or sooner if riding in muddy or wet conditions.

How can I ensure optimal brake performance on the Husqvarna FE 250 2023?

Regularly inspect brake pads for wear, ensure brake fluid levels are adequate, and bleed the brakes if you notice any sponginess.

What should I inspect before each ride on my Husqvarna FE 250 2023?

Check tire pressure, oil level, chain tension, brake function, and ensure all bolts and nuts are tightened securely.

How do I winterize my Husqvarna FE 250 2023?

To winterize, clean the bike thoroughly, lubricate all moving parts, add fuel stabilizer, disconnect the battery, and store the bike in a dry, covered area.