Contents

1 MEANS OF REPRESENTATION
- 1.1 Symbols used
- 1.2 Formats used
2 SAFETY ADVICE
- 2.1 Use definition intended use
- 2.2 Misuse
- 2.3 Safety advice
- 2.4 Degrees of risk and symbols
- 2.5 Overview of labels
- 2.6 Reporting safety defects
- 2.7 Noise emission warranty
- 2.8 Manufacturer warranty for the exhaust monitoring system
- 2.9 Operating noise warning
- 2.10 Consumer rights
- 2.11 Tampering warning
- 2.12 Safe operation
- 2.13 Protective clothing
- 2.14 Work rules
- 2.15 Environment
- 2.16 Owner's Manual
3 IMPORTANT NOTES
- 3.1 Manufacturer warranty, implied warranty
- 3.2 Fuel, auxiliary substances
- 3.3 Spare parts, accessories
- 3.4 Service
- 3.5 Figures
- 3.6 Customer service
4 VIEW OF VEHICLE
- 4.1 View of vehicle, front left (example)
- 4.2 View of vehicle, rear right (example)
5 SERIAL NUMBERS
- 5.1 Vehicle identification number
- 5.2 Type label
- 5.3 Key number
- 5.4 Engine number
- 5.5 Fork part number
- 5.6 Shock absorber article number
6 CONTROLS
- 6.1 Clutch lever
- 6.2 Hand brake lever
- 6.3 Throttle grip
- 6.4 Ignition lock
- 6.5 Emergency OFF switch
- 6.6 Start button
- 6.7 Horn button
- 6.8 Light switch
- 6.9 Turn signal switch
- 6.10 Overview of indicator lamps
- 6.11 Opening fuel tank filler cap
- 6.12 Closing the fuel tank filler cap
- 6.13 Cold start button
- 6.14 Idle speed adjusting screw
- 6.15 Shift lever
- 6.16 Foot brake lever
- 6.17 Side stand
- 6.18 Steering lock
- 6.19 Locking the steering
- 6.20 Unlocking the steering
7 COMBINATION INSTRUMENT
- 7.1 Combination instrument overview
- 7.2 Activation
- 7.3 Message on the combination instrument
- 7.4 Setting the combination instrument
- 7.5 Adjusting the kilometers or miles
- 7.6 Setting the clock
- 7.7 Setting the service display
- 7.8 Speed, time, and DST distance 1
- 7.9 Speed, time, and DST2 distance 2
- 7.10 AVG average speed, ART operating hours, and ODO total distance covered
8 PREPARING FOR USE
- 8.1 Advice on preparing for first use
- 8.2 Running-in the engine
- 8.3 Starting power of lithium-ion batteries at low temperatures
- 8.4 Preparing the vehicle for difficult operating conditions
- 8.5 Preparing the vehicle for riding on dry sand
- 8.6 Preparing the vehicle for riding on wet sand
- 8.7 Preparing the vehicle for riding on wet and muddy circuits
- 8.8 Preparing vehicle for high temperatures or slow riding
- 8.9 Preparing the vehicle for low temperatures or snow
9 RIDING INSTRUCTIONS
- 9.1 Checks and maintenance measures when preparing for use
- 9.2 Starting the vehicle
- 9.3 Starting off
- 9.4 Shifting, riding
- 9.5 Braking
- 9.6 Stopping, parking
- 9.7 Transporting
- 9.8 Refueling
10 SERVICE SCHEDULE
- 10.1 Additional information
- 10.2 Required work
- 10.3 Recommended work
11 TUNING THE CHASSIS
- 11.1 Checking the basic chassis setting with rider's weight
- 11.2 Compression damping of the shock absorber
- 11.3 Adjusting the low-speed compression damping of the shock absorber
- 11.4 Adjusting the high-speed compression damping of the shock absorber
- 11.5 Adjusting the rebound damping of the shock absorber
- 11.6 Measuring the dimension of the rear wheel unloaded
- 11.7 Checking the static sag of the shock absorber
- 11.8 Checking the riding sag of the shock absorber
- 11.9 Adjusting the spring preload of the shock absorber
- 11.10 Adjusting the riding sag
- 11.11 Checking the basic setting of the fork
- 11.12 Adjusting the compression damping of the fork
- 11.13 Adjusting the rebound damping of the fork
- 11.14 Adjusting the spring preload of the fork
- 11.15 Handlebar position
- 11.16 Adjusting the handlebar position
12 SERVICE WORK ON THE CHASSIS
- 12.1 Raising the motorcycle with a lift stand
- 12.2 Removing the motorcycle from the lift stand
- 12.3 Bleeding the fork legs
- 12.4 Cleaning the dust boots of the fork legs
- 12.5 Removing the fork protector
- 12.6 Installing the fork protector
- 12.7 Removing the fork legs
- 12.8 Installing the fork legs
- 12.9 Removing the lower triple clamp
- 12.10 Installing the lower triple clamp
- 12.11 Checking the steering head bearing play
- 12.12 Adjusting the steering head bearing play
- 12.13 Lubricating the steering head bearing
- 12.14 Removing front fender
- 12.15 Installing front fender
- 12.16 Removing the shock absorber
- 12.17 Installing the shock absorber
- 12.18 Removing the seat
- 12.19 Mounting the seat
- 12.20 Removing the air filter box cover
- 12.21 Installing the air filter box cover
- 12.22 Removing the air filter
- 12.23 Installing the air filter
- 12.24 Cleaning the air filter and air filter box
- 12.25 Removing the right side cover
- 12.26 Installing the right side cover
- 12.27 Removing the main silencer
- 12.28 Installing the main silencer
- 12.29 Cleaning the spark arrestor
- 12.30 Changing the glass fiber yarn filling in the main silencer
- 12.31 Removing the fuel tank
- 12.32 Installing the fuel tank
- 12.33 Checking for chain dirt accumulation
- 12.34 Cleaning the chain
- 12.35 Checking the chain tension
- 12.36 Adjusting the chain tension
- 12.37 Checking the chain, rear sprocket, engine sprocket, and chain guide
- 12.38 Checking the frame
- 12.39 Checking the link fork
- 12.40 Checking the throttle cable routing
- 12.41 Checking the rubber grip
- 12.42 Adjusting the basic position of the clutch lever
- 12.43 Checking/correcting the fluid level of hydraulic clutch
- 12.44 Changing the hydraulic clutch fluid
- 12.45 Removing the engine guard
- 12.46 Installing the engine guard
13 BRAKE SYSTEM
- 13.1 Adjusting the basic position of the hand brake lever
- 13.2 Checking brake discs
- 13.3 Checking the front brake fluid level
- 13.4 Adding front brake fluid
- 13.5 Checking the front brake linings
- 13.6 Changing the brake linings of the front brake
- 13.7 Checking the free travel of foot brake lever
- 13.8 Adjusting the basic position of the foot brake lever
- 13.9 Checking the rear brake fluid level
- 13.10 Adding rear brake fluid
- 13.11 Checking the brake linings of the rear brake
- 13.12 Changing the rear brake linings
14 WHEELS, TIRES
- 14.1 Removing the front wheel
- 14.2 Installing the front wheel
- 14.3 Removing the rear wheel
- 14.4 Installing the rear wheel
- 14.5 Checking the tire condition
- 14.6 Checking tire pressure
- 14.7 Checking spoke tension
15 ELECTRICAL SYSTEM
- 15.1 Removing the 12-V battery
- 15.2 Installing the 12-V battery
- 15.3 Charging the 12-V battery
- 15.4 Changing main fuse
- 15.5 Changing the fuses of individual electrical power consumers
- 15.6 Removing the headlight mask with the headlight
- 15.7 Installing the headlight mask with the headlight
- 15.8 Changing the headlight bulb
- 15.9 Changing the turn signal bulb
- 15.10 Checking the headlight setting
- 15.11 Adjust the headlight range.
- 15.12 Changing the combination instrument battery
- 15.13 Diagnostics connector
16 COOLING SYSTEM
- 16.1 Cooling system
- 16.2 Checking the antifreeze and coolant level
- 16.3 Checking the coolant level
- 16.4 Draining the coolant
- 16.5 Refilling with coolant
- 16.6 Changing the coolant
17 TUNING THE ENGINE
- 17.1 Checking the play in the throttle cable
- 17.2 Adjusting the play in the throttle cable
- 17.3 Adjusting the characteristic map of the throttle response
- 17.4 Adjusting the idle speed
- 17.5 Programming the throttle valve position
- 17.6 Checking the basic position of the shift lever
- 17.7 Adjusting the basic position of the shift lever
18 SERVICE WORK ON THE ENGINE
- 18.1 Changing the fuel screen
- 18.2 Checking the engine oil level
- 18.3 Changing the engine oil and oil filter, cleaning the oil screen
- 18.4 Adding engine oil
19 CLEANING, CARE
- 19.1 Cleaning the motorcycle
- 19.2 Checks and maintenance steps for winter operation
20 STORAGE
- 20.1 Storage
- 20.2 Preparing for use after storage
21 TROUBLESHOOTING
22 TECHNICAL DATA
- 22.1 Engine
- 22.2 Engine tightening torques
- 22.3 Capacities
  - 22.3.1 Engine oil
  - 22.3.2 Coolant
  - 22.3.3 Fuel
- 22.4 Chassis
- 22.5 Electrical system
- 22.6 Tires
- 22.7 Fork
- 22.8 Shock absorber
- 22.9 Chassis tightening torques
23 SUBSTANCES
24 AUXILIARY SUBSTANCES
25 STANDARDS
26 INDEX OF SPECIAL TERMS
27 LIST OF ABBREVIATIONS
28 LIST OF SYMBOLS
- 28.1 Yellow and orange symbols
- 28.2 Green and blue symbols
INDEX
- 1
- A
- B
- C
- D
- E
- F
- H
- I
- K
- L
- M
- O
- P
- R
- S
- T
- V
- W

Husqvarna FE 350s 2023 Owner's Manual

Husqvarna FE 350s 2023 Motorcycle manual cover

Pages 161

Year 2023

Language(s)

of 161

Husqvarna FE 350s 2023 Motorcycle Specification

The Husqvarna FE 350s 2023 is a versatile dual-sport motorcycle designed to excel in both off-road and on-road environments. It is powered by a robust 349.7cc, single-cylinder, four-stroke engine that delivers a harmonious blend of power and efficiency. The engine features advanced electronic fuel injection and a six-speed wide-ratio transmission, ensuring smooth and responsive performance across varied terrains.

Built on a lightweight chromium-molybdenum steel frame, the FE 350s offers exceptional handling and stability. The suspension system comprises a WP XPLOR 48 front fork with adjustable compression and rebound damping, paired with a WP XACT rear shock absorber featuring a linkage system. This setup provides superior shock absorption and enhanced rider comfort, even on the most rugged trails.

The motorcycle's braking system includes high-performance Brembo hydraulic disc brakes, ensuring reliable stopping power. The front brake features a 260mm floating disc, while the rear is equipped with a 220mm disc, both of which deliver precise and controlled braking.

Ergonomically designed for rider comfort and control, the Husqvarna FE 350s has a slim profile and a seat height of approximately 950mm, making it accessible for a wide range of riders. The bike is equipped with a multifunctional digital display that provides essential information at a glance, including speed, engine RPM, and trip details.

Durability and off-road capability are further enhanced by the use of high-quality components such as DID rims and Michelin Enduro tires, which offer excellent grip and longevity. Additionally, the FE 350s features a 2.2-gallon fuel tank, providing ample range for extended rides.

With its blend of advanced engineering, high-quality components, and rider-focused design, the Husqvarna FE 350s 2023 stands out as a premier choice for enthusiasts seeking a reliable and capable dual-sport motorcycle.

Husqvarna FE 350s 2023 Motorcycle F.A.Q.

How do I adjust the suspension on my Husqvarna FE 350s 2023 for off-road conditions?

To adjust the suspension for off-road conditions, start by setting the sag according to the manual's recommendations. Then, adjust the compression and rebound damping settings to suit the terrain, ensuring a balance between comfort and control.

What is the recommended oil change interval for the Husqvarna FE 350s 2023?

The recommended oil change interval for the Husqvarna FE 350s 2023 is every 15 hours of operation or as specified in the owner's manual, depending on riding conditions.

How can I troubleshoot starting issues with my Husqvarna FE 350s 2023?

If you experience starting issues, check the battery charge, fuel supply, and spark plug condition. Ensure the kill switch is in the correct position and inspect the starter button and connections for any faults.

What type of coolant should be used in the Husqvarna FE 350s 2023?

Use a high-quality ethylene glycol-based coolant with corrosion inhibitors, specifically designed for motorcycles, as recommended in the owner's manual.

How do I maintain the chain on my Husqvarna FE 350s 2023?

Regularly clean the chain with a suitable chain cleaner, inspect for wear and tension, and lubricate it using a high-quality chain lubricant. Adjust the chain tension according to the specifications in the manual.

What should I do if the engine overheats while riding my Husqvarna FE 350s 2023?

If the engine overheats, stop riding immediately and allow the engine to cool. Check the coolant level and ensure the radiator is not blocked. Inspect for any leaks and ensure the cooling fan operates correctly.

What is the correct tire pressure for the Husqvarna FE 350s 2023?

The correct tire pressure depends on the type of terrain. For general off-road use, the recommended pressure is typically around 12 psi, but always refer to the owner's manual for specific recommendations.

How do I replace the air filter on my Husqvarna FE 350s 2023?

To replace the air filter, remove the seat and the airbox cover. Carefully take out the old air filter and replace it with a new one, ensuring it is seated correctly to prevent dirt ingress.

What are the signs that the brake pads need replacing on the Husqvarna FE 350s 2023?

Signs that the brake pads need replacing include a squealing noise, reduced braking efficiency, or visible wear below the minimum thickness. Regularly inspect the pads for wear and replace them as necessary.

How do I perform a basic inspection before riding the Husqvarna FE 350s 2023?

Before riding, check the tire pressure, oil level, coolant, and brake fluid. Inspect the chain, brakes, and lights for proper function. Ensure all fasteners are tight and that there are no leaks or damage.