Contents

1 MEANS OF REPRESENTATION
- 1.1 Symbols used
- 1.2 Formats used
2 SAFETY ADVICE
- 2.1 Use definition intended use
- 2.2 Misuse
- 2.3 Safety advice
- 2.4 Degrees of risk and symbols
- 2.5 Tampering warning
- 2.6 Safe operation
- 2.7 Protective clothing
- 2.8 Work rules
- 2.9 Environment
- 2.10 Owner's Manual
3 IMPORTANT NOTES
- 3.1 Manufacturer warranty, implied warranty
- 3.2 Fuel, auxiliary substances
- 3.3 Spare parts, Husqvarna Motorcycles technical accessories
- 3.4 Service
- 3.5 Figures
- 3.6 Customer service
4 VIEW OF VEHICLE
- 4.1 View of vehicle, front left (example)
- 4.2 View of vehicle, rear right (example)
5 SERIAL NUMBERS
- 5.1 Vehicle identification number
- 5.2 Type label (TE 150 EU)
- 5.3 Key number (TE 150 EU)
- 5.4 Engine number
- 5.5 Fork article number
- 5.6 Shock absorber article number
6 CONTROLS
- 6.1 Clutch lever
- 6.2 Hand brake lever
- 6.3 Throttle grip
- 6.4 Stop button (TE 150 EU)
- 6.5 Stop button (TE 150 US)
- 6.6 Horn button (TE 150 EU)
- 6.7 Light switch (TE 150 EU)
- 6.8 Light switch (TE 150 US)
- 6.9 Turn signal switch (TE 150 EU)
- 6.10 Emergency OFF switch (TE 150 EU)
- 6.11 Start button (TE 150 EU)
- 6.12 Start button (TE 150 US)
- 6.13 Map switch
- 6.14 Overview of indicator lamps (TE 150 EU)
- 6.15 Overview of indicator lamps (TE 150 US)
- 6.16 Opening fuel tank filler cap
- 6.17 Closing the fuel tank filler cap
- 6.18 Opening 2-stroke oil tank cap
- 6.19 Closing 2-stroke oil tank cap
- 6.20 Cold start button
- 6.21 Idle speed adjusting screw
- 6.22 Shift lever
- 6.23 Kick starter lever
- 6.24 Foot brake lever
- 6.25 Side stand
- 6.26 Steering lock (TE 150 EU)
- 6.27 Locking the steering (TE 150 EU)
- 6.28 Unlocking the steering (TE 150 EU)
7 COMBINATION INSTRUMENT
- 7.1 Overview
- 7.2 Activation
- 7.3 Messages on the combination instrument
- 7.4 Adjusting the combination instrument
- 7.5 Setting the kilometers or miles
- 7.6 Setting the clock
- 7.7 Setting the service display
- 7.8 Speed, time, and DST distance 1
- 7.9 Speed, time, and DST2 distance 2
- 7.10 AVG average speed, ART operating hours, and ODO total distance covered
8 PREPARING FOR USE
- 8.1 Advice on preparing for first use
- 8.2 Running in the engine
- 8.3 Starting power of lithium-ion batteries at low temperatures
- 8.4 Preparing the vehicle for difficult operating conditions
- 8.5 Preparing the vehicle for rides on dry sand
- 8.6 Preparing the vehicle for rides on wet sand
- 8.7 Preparing the vehicle for rides on wet and muddy circuits
- 8.8 Preparing vehicle for high temperatures or slow riding
- 8.9 Preparing the vehicle for low temperatures or snow
9 RIDING INSTRUCTIONS
- 9.1 Checks and maintenance measures when preparing for use
- 9.2 Starting the vehicle
- 9.3 Starting off
- 9.4 Shifting, riding
- 9.5 Braking
- 9.6 Stopping, parking
- 9.7 Transporting
- 9.8 Refueling
- 9.9 Adding 2-stroke oil
10 SERVICE SCHEDULE
- 10.1 Additional information
- 10.2 Required work
- 10.3 Recommended work
11 TUNING THE CHASSIS
- 11.1 Checking the basic chassis setting with rider's weight
- 11.2 Compression damping of the shock absorber
- 11.3 Adjusting the low-speed compression damping of the shock absorber
- 11.4 Adjusting the high-speed compression damping of the shock absorber
- 11.5 Adjusting the rebound damping of the shock absorber
- 11.6 Measuring the dimension of the rear wheel unloaded
- 11.7 Checking the static sag of the shock absorber
- 11.8 Checking the riding sag of the shock absorber
- 11.9 Adjusting the spring preload of the shock absorber
- 11.10 Adjusting the riding sag
- 11.11 Checking the basic setting of the fork
- 11.12 Adjusting the compression damping of the fork
- 11.13 Adjusting the rebound damping of the fork
- 11.14 Adjusting the spring preload of the fork
- 11.15 Handlebar position
- 11.16 Adjusting the handlebar position
12 SERVICE WORK ON THE CHASSIS
- 12.1 Raising the motorcycle with a lift stand
- 12.2 Removing the motorcycle from the lift stand
- 12.3 Bleeding the fork legs
- 12.4 Cleaning the dust boots of the fork legs
- 12.5 Removing the fork legs
- 12.6 Installing the fork legs
- 12.7 Removing the fork protector
- 12.8 Installing the fork protector
- 12.9 Removing the lower triple clamp
- 12.10 Installing the lower triple clamp
- 12.11 Checking the steering head bearing play
- 12.12 Adjusting steering head bearing play
- 12.13 Lubricating the steering head bearing
- 12.14 Removing front fender
- 12.15 Installing front fender
- 12.16 Removing the shock absorber
- 12.17 Installing the shock absorber
- 12.18 Removing the seat
- 12.19 Mounting the seat
- 12.20 Removing the air filter box cover
- 12.21 Installing the air filter box cover
- 12.22 Removing the air filter
- 12.23 Cleaning the air filter and air filter box
- 12.24 Installing the air filter
- 12.25 Removing the main silencer
- 12.26 Installing the main silencer
- 12.27 Changing the glass fiber yarn filling of the main silencer
- 12.28 Removing the right side cover
- 12.29 Installing the right side cover
- 12.30 Removing the fuel tank
- 12.31 Installing the fuel tank
- 12.32 Checking the chain for dirt
- 12.33 Cleaning the chain
- 12.34 Checking the chain tension
- 12.35 Adjusting the chain tension
- 12.36 Checking the chain, rear sprocket, engine sprocket, and chain guide
- 12.37 Checking the frame
- 12.38 Checking the link fork
- 12.39 Checking the throttle cable routing
- 12.40 Checking the rubber grip
- 12.41 Adjusting the basic position of the clutch lever
- 12.42 Checking/correcting the fluid level of the hydraulic clutch
- 12.43 Changing the hydraulic clutch fluid
- 12.44 Removing the engine guard
- 12.45 Installing the engine guard
13 BRAKE SYSTEM
- 13.1 Adjusting the basic position of the hand brake lever
- 13.2 Checking the brake discs
- 13.3 Checking the front brake fluid level
- 13.4 Adding front brake fluid
- 13.5 Checking the front brake linings
- 13.6 Changing the brake linings of the front brake
- 13.7 Checking the free travel of the foot brake lever
- 13.8 Adjusting the basic position of the foot brake lever
- 13.9 Checking the rear brake fluid level
- 13.10 Adding rear brake fluid
- 13.11 Checking the brake linings of the rear brake
- 13.12 Changing the rear brake linings
14 WHEELS, TIRES
- 14.1 Removing the front wheel
- 14.2 Installing the front wheel
- 14.3 Removing the rear wheel
- 14.4 Installing the rear wheel
- 14.5 Checking the tire condition
- 14.6 Checking tire pressure
- 14.7 Checking spoke tension
15 ELECTRICAL SYSTEM
- 15.1 Removing the 12-V battery
- 15.2 Installing the 12-V battery
- 15.3 Charging the 12-V battery
- 15.4 Changing main fuse
- 15.5 Changing the fuses of individual electrical power consumers
- 15.6 Removing the headlight mask with the headlight
- 15.7 Installing the headlight mask with the headlight
- 15.8 Changing the headlight bulb
- 15.9 Changing the turn signal bulb (TE 150 EU)
- 15.10 Checking the headlight setting
- 15.11 Adjusting the headlight range
- 15.12 Changing the combination instrument battery
- 15.13 Diagnostics connector
16 COOLING SYSTEM
- 16.1 Cooling system
- 16.2 Checking the antifreeze and coolant level
- 16.3 Checking the coolant level
- 16.4 Draining the coolant
- 16.5 Refilling with coolant
- 16.6 Changing the coolant
17 TUNING THE ENGINE
- 17.1 Checking the play in the throttle cable
- 17.2 Adjusting the play in the throttle cable
- 17.3 Setting the characteristic map of the throttle response
- 17.4 Adjusting the idle speed
- 17.5 Programming ambient air pressure
- 17.6 Checking the basic position of the shift lever
- 17.7 Adjusting the basic position of the shift lever
18 SERVICE WORK ON THE ENGINE
- 18.1 Changing the fuel screen
- 18.2 Checking 2-stroke oil level
- 18.3 Priming oil pump
- 18.4 Cleaning the oil screen in the oil tank
- 18.5 Checking the gear oil level
- 18.6 Changing the gear oil
- 18.7 Adding the gear oil
19 CLEANING, CARE
- 19.1 Cleaning the motorcycle
- 19.2 Checks and maintenance steps for winter operation
20 STORAGE
- 20.1 Storage
- 20.2 Preparing for use after storage
21 TROUBLESHOOTING
22 BLINK CODE
23 TECHNICAL DATA
- 23.1 Engine
- 23.2 Engine tightening torques
- 23.3 Capacities
  - 23.3.1 Gear oil
  - 23.3.2 Coolant
  - 23.3.3 Fuel
- 23.4 Chassis
- 23.5 Electrical system
- 23.6 Tires
- 23.7 Fork
- 23.8 Shock absorber
- 23.9 Chassis tightening torques
24 SUBSTANCES
25 AUXILIARY SUBSTANCES
26 STANDARDS
27 INDEX OF SPECIAL TERMS
28 LIST OF ABBREVIATIONS
29 LIST OF SYMBOLS
- 29.1 Red symbols
- 29.2 Yellow and orange symbols
- 29.3 Green and blue symbols
INDEX
- 1
- 2
- A
- B
- C
- D
- E
- F
- G
- H
- I
- K
- L
- M
- O
- P
- R
- S
- T
- V
- W

Husqvarna TE 150 2023 Owner's Manual

Husqvarna TE 150 2023 Motorcycle manual cover

Pages 168

Year 2023

Language(s)

of 168

Husqvarna TE 150 2023 Motorcycle Specification

The Husqvarna TE 150 2023 Motorcycle is engineered to deliver exceptional performance and versatility for enduro riders. This model features a liquid-cooled, 2-stroke, single-cylinder engine with a displacement of 144.3 cm³, ensuring a balance of power and lightweight agility. The engine employs a state-of-the-art electronic fuel injection (EFI) system, enhancing throttle response and fuel efficiency while minimizing emissions.

The motorcycle is built on a robust yet lightweight chromium-molybdenum steel frame, optimized for rigidity and precise handling. A WP XPLOR 48 front fork and WP XACT rear shock absorber offer superior suspension performance, providing 300 mm and 300 mm of travel, respectively, for optimal comfort and control over diverse terrains.

The TE 150 is equipped with Brembo hydraulic brakes, featuring a 260 mm disc at the front and a 220 mm disc at the rear, delivering reliable stopping power. The bike also includes an electric starter and a 6-speed transmission, ensuring smooth and efficient gear shifts.

The ergonomics of the TE 150 are designed with the rider in mind, featuring a slender bodywork and a flat seat profile for enhanced maneuverability and comfort. The 2023 model comes with a high-capacity 8.5-liter fuel tank, allowing for extended rides without frequent refueling.

Additional features include a multifunctional digital display, high-quality ProTaper handlebars, and a lightweight composite subframe, which contribute to the bike’s overall performance and ease of use. The Husqvarna TE 150 2023 is a meticulously designed machine, combining advanced technology, high-quality components, and ergonomic design to meet the demanding needs of modern enduro riders.

Husqvarna TE 150 2023 Motorcycle F.A.Q.

What type of fuel should I use for the Husqvarna TE 150 2023?

The Husqvarna TE 150 2023 requires high-octane unleaded gasoline with an octane rating of at least 95 (RON).

How often should I change the oil in my Husqvarna TE 150 2023?

It is recommended to change the oil every 10 hours of riding or after every race, whichever comes first.

What is the correct tire pressure for the Husqvarna TE 150 2023?

The recommended tire pressure is typically around 12 psi for the front tire and 12 psi for the rear tire, but it may vary based on riding conditions.

How do I properly clean the air filter on the Husqvarna TE 150 2023?

Remove the air filter, wash it with a mild soap and water solution, allow it to dry completely, and then apply air filter oil before reinstalling.

What are the recommended suspension settings for the Husqvarna TE 150 2023?

The recommended suspension settings can vary based on rider weight and preference. It's best to consult the owner's manual for base settings and adjust accordingly.

How can I troubleshoot starting issues with my Husqvarna TE 150 2023?

Check the spark plug, ensure the fuel is fresh, verify that the air filter is clean, and inspect the battery connections for any issues.

What maintenance should be performed after every ride on the Husqvarna TE 150 2023?

After every ride, it's recommended to clean the bike, check for loose bolts, inspect the chain tension, and lubricate the chain.

How do I adjust the chain tension on my Husqvarna TE 150 2023?

Loosen the rear axle nut, adjust the chain tensioners evenly on both sides, ensuring proper slack, then retighten the axle nut.

What should I do if the engine overheats on my Husqvarna TE 150 2023?

Stop the motorcycle immediately, let it cool down, check the coolant level, and ensure there are no blockages in the radiator.

How can I improve the performance of my Husqvarna TE 150 2023?

To enhance performance, consider upgrading the exhaust system, optimizing the carburetor settings, and ensuring regular maintenance is performed.