Husqvarna TC 85 2021 Owner's Manual
![Husqvarna TC 85 2021 Motorcycle manual cover](/images/LTEigjBfinWaiNNpsrBYeSxy/thumbs/thumb175x175.webp)
The recommended tire pressure for the Husqvarna TC 85 2021 is 1.0 bar (14.5 psi) for both front and rear tires for optimal performance.
It is advisable to change the engine oil every 15 hours of operation or after every race to ensure the engine runs smoothly.
Use a high-quality ethylene glycol-based coolant mixed with distilled water in a 50:50 ratio for optimal cooling performance.
Check the spark plug for fouling, ensure the fuel is fresh, and verify that the kill switch is in the correct position. If problems persist, consult with a professional mechanic.
The chain should have 10-15 mm (0.4-0.6 inches) of slack at the midpoint between the front and rear sprockets for proper tension.
Remove the air filter, wash it with a mild detergent, rinse thoroughly, allow it to dry, and then apply air filter oil before reinstalling.
The recommended brake pads for the Husqvarna TC 85 2021 are sintered metal or ceramic composite, which offer good durability and performance.
Adjust the fork compression and rebound settings according to the riding conditions and your weight. Refer to the owner’s manual for specific adjustment procedures.
The correct spark plug gap for the Husqvarna TC 85 2021 is 0.6 mm (0.024 inches). Ensure the gap is set correctly for optimal engine performance.
Regularly check the clutch cable for fraying, adjust the free play to 3-5 mm (0.12-0.20 inches), and ensure the clutch fluid level is adequate.