Husqvarna TC 85 2020 Owner's Manual
![Husqvarna TC 85 2020 Motorcycle manual cover](/images/DbPRkwEZWMCARRturJAoMRyW/thumbs/thumb175x175.webp)
The recommended oil type for the Husqvarna TC 85 2020 is a high-quality synthetic 2-stroke oil. Ensure that the oil meets the standards set by the manufacturer for optimal performance.
The air filter should be checked and cleaned after every ride in dusty conditions. In normal conditions, inspect and clean it after every 5 hours of use. Replace it if it shows signs of wear or damage.
The recommended tire pressure for the Husqvarna TC 85 2020 is typically around 12 psi for the front tire and 12 psi for the rear tire. Always check the manual for specific conditions as adjustments may be needed based on terrain.
If your Husqvarna TC 85 2020 is having starting issues, check the spark plug for fouling, ensure there is fresh fuel, and inspect the carburetor for clogs. Also, verify that the kill switch is not engaged.
After a muddy ride, thoroughly wash the motorcycle to remove mud and debris, clean and lubricate the chain, inspect and clean the air filter, and check the brake pads and other components for wear.
To adjust the suspension on the Husqvarna TC 85 2020, use the adjustment screws on the front forks and the rear shock absorber to set the preload, compression, and rebound damping to suit your riding style and terrain. Refer to the manual for specific settings.
Common signs of a worn-out chain include excessive slack, visible rust, kinks, or stiff links. It's important to regularly inspect the chain and replace it if any of these signs are present to ensure safe operation.
To store the Husqvarna TC 85 2020 during the off-season, clean the bike thoroughly, lubricate moving parts, stabilize the fuel, disconnect the battery, and store it in a dry, cool place. Consider elevating the bike to prevent tire deformation.
If the brakes feel spongy, there may be air in the brake lines. Bleed the brake system to remove any air. Inspect the brake fluid level and top it off if necessary. Check for leaks in the brake lines and ensure that the brake pads are not worn out.
To adjust the clutch lever on the Husqvarna TC 85 2020, use the adjuster screw located on the lever perch to set the desired free play. Ensure there is a small amount of free play to allow for proper clutch engagement.