Husqvarna TC 65 2022 Owner's Manual
![Husqvarna TC 65 2022 Motorcycle manual cover](/images/UrdSkXQLSYDmPgnCwSJzMlqj/thumbs/thumb175x175.webp)
The recommended maintenance schedule for the Husqvarna TC 65 2022 includes regular oil changes every 10 hours of use, air filter cleaning after each ride, chain lubrication every ride, and a thorough inspection every 15 hours.
To troubleshoot starting issues, check the fuel supply, inspect the spark plug for wear or fouling, ensure the choke is functioning, and verify that the kill switch is in the correct position.
It is recommended to use high-quality synthetic 2-stroke engine oil specifically designed for motocross bikes in the Husqvarna TC 65 2022.
To adjust the suspension, consult the owner's manual for baseline settings, then fine-tune the compression and rebound damping according to your weight, riding style, and track conditions.
If the clutch is slipping, check the clutch cable adjustment, inspect the clutch plates for wear, and replace the clutch springs if necessary.
To improve braking performance, ensure the brake pads are not worn, check brake fluid levels, bleed the brake lines for any air bubbles, and clean the brake rotors.
The recommended tire pressure for the Husqvarna TC 65 2022 is 12-14 psi for the front tire and 10-12 psi for the rear tire, depending on track conditions and rider preference.
To replace the air filter, remove the seat, detach the airbox cover, remove the old filter, and install the new filter ensuring it is properly seated and sealed.
Overheating can be caused by low coolant levels, a clogged radiator, a faulty thermostat, or incorrect fuel mixture. Check these components for issues.
The spark plug should be inspected every 10 hours of use and replaced every 20 hours or if it shows signs of wear or fouling to ensure optimal engine performance.