Contents

1 MEANS OF REPRESENTATION
- 1.1 Symbols used
- 1.2 Formats used
2 SAFETY ADVICE
- 2.1 Use definition intended use
- 2.2 Misuse
- 2.3 Safety advice
- 2.4 Degrees of risk and symbols
- 2.5 Tampering warning
- 2.6 Safe operation
- 2.7 Protective clothing
- 2.8 Work rules
- 2.9 Environment
- 2.10 Owner's Manual
3 IMPORTANT NOTES
- 3.1 Manufacturer warranty, implied warranty
- 3.2 Fuel, auxiliary substances
- 3.3 Spare parts, Husqvarna Motorcycles technical accessories
- 3.4 Service
- 3.5 Figures
- 3.6 Customer service
4 VIEW OF VEHICLE
- 4.1 View of vehicle, front left (example)
- 4.2 View of vehicle, rear right (example)
5 SERIAL NUMBERS
- 5.1 Vehicle identification number
- 5.2 Steering head label
- 5.3 Engine number
- 5.4 Fork part number
- 5.5 Shock absorber article number
6 CONTROLS
- 6.1 Clutch lever
- 6.2 Hand brake lever
- 6.3 Throttle grip
- 6.4 Stop button
- 6.5 Start button
- 6.6 Combination switch
- 6.7 Overview of indicator lights (TC 250)
- 6.8 Overview of indicator lights (TX 300)
- 6.9 Combination instrument
- 6.10 Opening fuel tank filler cap
- 6.11 Closing the fuel tank filler cap
- 6.12 Cold start button
- 6.13 Idle speed adjusting screw
- 6.14 Shift lever
- 6.15 Foot brake lever
- 6.16 Plug-in stand (TC 250)
- 6.17 Side stand (TX 300)
7 PREPARING FOR USE
- 7.1 Advice on preparing for first use
- 7.2 Running in the engine
- 7.3 Starting power of lithium-ion batteries at low temperatures
- 7.4 Preparing the vehicle for difficult operating conditions
- 7.5 Preparing the vehicle for rides on dry sand
- 7.6 Preparing the vehicle for rides on wet sand
- 7.7 Preparing the vehicle for rides on wet and muddy circuits
- 7.8 Preparing vehicle for high temperatures or slow riding
- 7.9 Preparing the vehicle for low temperatures or snow
8 RIDING INSTRUCTIONS
- 8.1 Checks and maintenance measures when preparing for use
- 8.2 Starting the vehicle
- 8.3 Starting off
- 8.4 Shifting, riding
- 8.5 Braking
- 8.6 Stopping, parking
- 8.7 Transporting
- 8.8 Refueling
9 SERVICE SCHEDULE
- 9.1 Additional information
- 9.2 Service schedule
10 TUNING THE CHASSIS
- 10.1 Checking the basic chassis setting with the rider's weight
- 10.2 Compression damping of the shock absorber
- 10.3 Adjusting the low-speed compression damping of the shock absorber
- 10.4 Adjusting the high-speed compression damping of the shock absorber
- 10.5 Adjusting the rebound damping of the shock absorber
- 10.6 Measuring the dimension of the rear wheel unloaded
- 10.7 Checking the static sag of the shock absorber
- 10.8 Checking the riding sag of the shock absorber
- 10.9 Adjusting the spring preload of the shock absorber
- 10.10 Adjusting the riding sag
- 10.11 Air suspension XACT (TC 250)
- 10.12 Checking the basic setting of the fork
- 10.13 Adjusting the fork air pressure (TC 250)
- 10.14 Adjusting the compression damping of the fork
- 10.15 Adjusting the rebound damping of the fork
- 10.16 Handlebar position
- 10.17 Adjusting the handlebar position
11 SERVICE WORK ON THE CHASSIS
- 11.1 Raising the motorcycle with a lift stand
- 11.2 Removing the motorcycle from the lift stand
- 11.3 Bleeding the fork legs
- 11.4 Cleaning the dust boots of the fork legs
- 11.5 Removing the fork protector
- 11.6 Installing the fork protector
- 11.7 Removing the engine guard (TX 300)
- 11.8 Installing the engine guard (TX 300)
- 11.9 Removing the right side panel
- 11.10 Installing the right side panel
- 11.11 Removing the frame protector
- 11.12 Installing the frame protector
- 11.13 Removing the fork legs
- 11.14 Installing the fork legs
- 11.15 Removing the lower triple clamp
- 11.16 Installing the lower triple clamp
- 11.17 Checking steering head bearing play
- 11.18 Adjusting steering head bearing play
- 11.19 Lubricating the steering head bearing
- 11.20 Removing the start number plate
- 11.21 Installing the start number plate
- 11.22 Removing the front fender
- 11.23 Installing front fender
- 11.24 Removing the shock absorber
- 11.25 Installing the shock absorber
- 11.26 Removing the seat
- 11.27 Mounting the seat
- 11.28 Removing the air filter box cover
- 11.29 Installing the air filter box cover
- 11.30 Removing the air filter
- 11.31 Installing the air filter
- 11.32 Cleaning the air filter and air filter box
- 11.33 Preparing the air filter box cover for securing
- 11.34 Removing the main silencer
- 11.35 Installing the main silencer
- 11.36 Changing the glass fiber yarn filling of the main silencer
- 11.37 Removing the fuel tank
- 11.38 Installing the fuel tank
- 11.39 Checking the chain for dirt
- 11.40 Cleaning the chain
- 11.41 Checking the chain tension
- 11.42 Adjusting the chain tension
- 11.43 Checking the chain, rear sprocket, engine sprocket, and chain guide
- 11.44 Checking the frame
- 11.45 Checking the link fork
- 11.46 Checking the throttle cable routing
- 11.47 Checking the rubber grip
- 11.48 Adjusting the basic position of the clutch lever
- 11.49 Checking/correcting the fluid level of hydraulic clutch
- 11.50 Changing the hydraulic clutch fluid
12 BRAKE SYSTEM
- 12.1 Checking the free travel of the hand brake lever
- 12.2 Adjusting the basic position of the hand brake lever
- 12.3 Checking the brake discs
- 12.4 Checking the front brake fluid level
- 12.5 Adding front brake fluid
- 12.6 Checking that the brake linings of the front brake are secured
- 12.7 Changing the brake linings of the front brake
- 12.8 Checking the free travel of foot brake lever
- 12.9 Adjusting the basic position of the foot brake lever
- 12.10 Checking the rear brake fluid level
- 12.11 Adding rear brake fluid
- 12.12 Checking that the brake linings of the rear brake are secured
- 12.13 Changing the rear brake linings
13 WHEELS, TIRES
- 13.1 Removing the front wheel
- 13.2 Installing the front wheel
- 13.3 Removing the rear wheel
- 13.4 Installing the rear wheel
- 13.5 Checking the tire condition
- 13.6 Checking tire pressure
- 13.7 Checking spoke tension
14 ELECTRICAL SYSTEM
- 14.1 Removing the 12-V battery
- 14.2 Installing the 12-V battery
- 14.3 Charging the 12-V battery
- 14.4 Changing the main fuse
- 14.5 Changing the fuse of the fuel pump
- 14.6 Diagnostics connector
15 COOLING SYSTEM
- 15.1 Cooling system
- 15.2 Checking the antifreeze and coolant level
- 15.3 Checking the coolant level
- 15.4 Draining the coolant
- 15.5 Refilling with coolant
- 15.6 Changing the coolant
16 EXHAUST CONTROL
- 16.1 Programming the
17 TUNING THE ENGINE
- 17.1 Changing the mapping
- 17.2 Checking the play in the throttle cable
- 17.3 Adjusting the play in the throttle cable
- 17.4 Adjusting the idle speed
- 17.5 Checking the basic position of the shift lever
- 17.6 Adjusting the basic position of the shift lever
18 SERVICE WORK ON THE ENGINE
- 18.1 Changing the fuel screen
- 18.2 Checking the gear oil level
- 18.3 Changing the gear oil
- 18.4 Adding the gear oil
19 CLEANING, CARE
- 19.1 Cleaning the motorcycle
20 STORAGE
- 20.1 Storage
- 20.2 Preparing for use after storage
21 TROUBLESHOOTING
22 BLINK CODE
23 TECHNICAL SPECIFICATIONS
- 23.1 Engine
- 23.2 Engine tightening torques
- 23.3 Capacities
  - 23.3.1 Gear oil
  - 23.3.2 Coolant
  - 23.3.3 Fuel
- 23.4 Chassis
- 23.5 Electrical system
- 23.6 Tires
- 23.7 Fork
  - 23.7.1 TC 250
  - 23.7.2 TX 300
- 23.8 Shock absorber
  - 23.8.1 TC 250
  - 23.8.2 TX 300
- 23.9 Chassis tightening torques
24 SUBSTANCES
25 AUXILIARY SUBSTANCES
26 STANDARDS
27 INDEX OF SPECIAL TERMS
28 LIST OF ABBREVIATIONS
29 LIST OF SYMBOLS
- 29.1 Yellow and orange symbols
- 29.2 Green and white symbols
INDEX
- 1
- A
- B
- C
- D
- E
- F
- G
- H
- I
- L
- M
- O
- P
- R
- S
- T
- U
- V
- W

Husqvarna TC 250 2024 Owner's Manual

Husqvarna TC 250 2024 Motorcycle manual cover

Pages 155

Year 2024

Language(s)

of 155

Husqvarna TC 250 2024 Motorcycle Specification

The Husqvarna TC 250 2024 Motorcycle represents the pinnacle of two-stroke motocross engineering, embodying a blend of cutting-edge technology and refined performance. At its core, the TC 250 is powered by a robust 249cc two-stroke engine, optimized for delivering peak power and responsiveness. The engine features an advanced electronic fuel injection system, which ensures precise fuel delivery and contributes to improved throttle response and overall efficiency.

The motorcycle's chassis is built on a lightweight yet durable chromium-molybdenum steel frame, designed to provide optimal rigidity and rider feedback. This is complemented by a high-performance WP XACT front fork with AER technology and a fully adjustable WP XACT rear shock, offering exceptional handling and stability across varied terrains. The TC 250's suspension system is engineered for superior traction and control, allowing riders to tackle challenging tracks with confidence.

Ergonomically, the Husqvarna TC 250 2024 is designed for rider comfort and maneuverability. It features a slim profile, an ergonomic seat, and strategically positioned footpegs and handlebars, ensuring a natural riding posture and reduced fatigue during prolonged rides. The bike is also equipped with a state-of-the-art Brembo hydraulic clutch and braking system, providing consistent and reliable stopping power.

Additional features include a multifunctional digital display, which provides essential information at a glance, and a high-capacity fuel tank, ensuring extended riding sessions without frequent refueling. The TC 250's aggressive styling, with distinctive Husqvarna graphics, reflects its high-performance pedigree. Overall, the Husqvarna TC 250 2024 stands as a testament to Husqvarna's commitment to innovation, quality, and performance in the motocross segment.

Husqvarna TC 250 2024 Motorcycle F.A.Q.

What is the recommended oil type for the Husqvarna TC 250 2024?

The recommended oil type for the Husqvarna TC 250 2024 is fully synthetic 2-stroke oil.

How often should I service the air filter on my Husqvarna TC 250 2024?

The air filter should be cleaned and serviced after every 5 hours of riding in dusty conditions, or more frequently if necessary.

What is the correct tire pressure for optimal performance?

The recommended tire pressure for the Husqvarna TC 250 2024 is generally 12-14 psi for the front tire and 10-12 psi for the rear tire in off-road conditions.

How can I reset the maintenance light on my Husqvarna TC 250 2024?

To reset the maintenance light, turn the ignition on, navigate to the service menu using the handlebar controls, and follow the prompts to reset the service interval.

What should I do if my Husqvarna TC 250 2024 is hard to start cold?

Check the choke operation, ensure the fuel is fresh, inspect the spark plug for wear, and verify that the carburetor settings are correct.

How do I adjust the suspension on the Husqvarna TC 250 2024 for different terrains?

Adjust the suspension settings using the clicker adjustments on the forks and shock absorber; refer to the owner's manual for recommended settings for various terrains.

What is the break-in procedure for a new Husqvarna TC 250 2024?

The break-in procedure involves varying the engine speed and avoiding prolonged periods of full throttle for the first 10 hours of operation.

How can I troubleshoot electrical issues on my Husqvarna TC 250 2024?

Check all fuses and connections, inspect the wiring for damage, and ensure the battery is fully charged and in good condition.

What is the recommended chain tension for the Husqvarna TC 250 2024?

The chain tension should be adjusted to allow approximately 1.5 inches (35-40 mm) of slack at the midpoint of the chain.

How often should I replace the spark plug on my Husqvarna TC 250 2024?

It is advisable to inspect the spark plug every 10 hours of use and replace it if there are signs of wear or fouling.