Husqvarna LE 322R Operator's Manual

To start the Husqvarna LE 322R Lawn Mower, ensure the battery is charged, set the mower to the 'start' position, press the start button, and release it once the engine starts running.
Regular maintenance for the Husqvarna LE 322R includes checking and cleaning the air filter, sharpening the blades, inspecting the battery and electrical connections, and checking tire pressure.
If the mower does not start, check the battery charge level, ensure the power cord is properly connected, inspect the fuse, and make sure the safety switch is engaged.
Uneven cutting can be resolved by checking and adjusting the tire pressure, leveling the mower deck, and ensuring the blades are sharp and correctly installed.
To extend the battery life, store the mower in a cool, dry place, avoid fully discharging the battery, and charge it after each use. Regularly inspect and clean the battery terminals.
For off-season storage, clean the mower thoroughly, remove the battery and store it separately in a cool place, and cover the mower to protect it from dust and moisture.
Blades should be sharpened at least once per mowing season or more frequently if the mower is used extensively on tough terrain.
Excessive vibration can be caused by unbalanced blades, loose parts, or debris stuck in the mower. Inspect and tighten all components and clean any debris from the mower deck.
Adjust the cutting height by moving the height adjustment lever located near the wheels. Set it to the desired position based on the grass length and terrain.
Clumps of grass can result from mowing wet grass, using dull blades, or a clogged discharge chute. Ensure the lawn is dry, blades are sharp, and the chute is clear before mowing.