Husqvarna GTH24V52LS Operator's Manual
![Husqvarna GTH24V52LS Lawn Mower manual cover](/images/ponRXEToMDIeYdOzvpBHoSBW/thumbs/thumb175x175.webp)
To change the oil, first run the engine for a few minutes to warm it up. Turn off the engine and disconnect the spark plug wire. Place a pan under the oil drain valve, open the valve, and allow the old oil to drain completely. Close the valve and refill with new engine oil as specified in the manual.
Check the fuel level and quality, ensuring the fuel is fresh. Verify the spark plug is clean and properly connected. Examine the air filter for clogs. If all else fails, consult the manual or a professional technician.
Regularly inspect the blades for damage and sharpness. Sharpen them as needed, and replace any damaged blades. Always disconnect the spark plug wire before performing maintenance on the blades to prevent accidental starting.
The recommended tire pressure for this model is typically around 15 psi for the front tires and 10 psi for the rear tires. Always refer to the manual for exact specifications.
To adjust the cutting height, locate the height adjustment lever on the mower deck. Move the lever to select the desired cutting height. Ensure both sides are set to the same level for an even cut.
Use clean, fresh unleaded gasoline with a minimum octane rating of 87. Avoid using gasoline with more than 10% ethanol content to prevent engine damage.
Remove the air filter cover, take out the filter, and gently clean it with compressed air or soapy water. If using water, ensure it is completely dry before reinstalling. Replace the filter if it is excessively dirty or damaged.
Excessive vibration can be caused by unbalanced or damaged blades, loose mounting hardware, or worn-out belts. Inspect and address each component to resolve the issue.
It is recommended to replace the spark plug every 100 hours of operation or annually, whichever comes first. This ensures optimal engine performance and easy starting.
Before storing, clean the mower thoroughly and drain or stabilize the fuel. Change the oil, lubricate moving parts, and remove the battery to store it in a cool, dry place. Cover the mower to protect it from dust and moisture.