Contents

1 MEANS OF REPRESENTATION
- 1.1 Symbols used
- 1.2 Formats used
2 SAFETY ADVICE
- 2.1 Use definition intended use
- 2.2 Misuse
- 2.3 Safety advice
- 2.4 Degrees of risk and symbols
- 2.5 Overview of labels
- 2.6 Reporting safety defects
- 2.7 Noise emission warranty
- 2.8 Manufacturer warranty for the exhaust monitoring system
- 2.9 Operating noise warning
- 2.10 Consumer rights
- 2.11 Tampering warning
- 2.12 Safe operation
- 2.13 Protective clothing
- 2.14 Work rules
- 2.15 Environment
- 2.16 Owner's Manual
3 IMPORTANT NOTES
- 3.1 Manufacturer warranty, implied warranty
- 3.2 Fuel, auxiliary substances
- 3.3 Spare parts, accessories
- 3.4 Service
- 3.5 Figures
- 3.6 Customer service
4 VIEW OF VEHICLE
- 4.1 View of vehicle, front left (example)
- 4.2 View of vehicle, rear right (example)
5 SERIAL NUMBERS
- 5.1 Vehicle identification number
- 5.2 Type label
- 5.3 Key number
- 5.4 Engine number
- 5.5 Fork part number
- 5.6 Shock absorber article number
6 CONTROLS
- 6.1 Clutch lever
- 6.2 Hand brake lever
- 6.3 Throttle grip
- 6.4 Ignition lock
- 6.5 Emergency OFF switch
- 6.6 Start button
- 6.7 Horn button
- 6.8 Light switch
- 6.9 Turn signal switch
- 6.10 Overview of indicator lights
- 6.11 Opening fuel tank filler cap
- 6.12 Closing the fuel tank filler cap
- 6.13 Cold start button
- 6.14 Idle speed adjusting screw
- 6.15 Shift lever
- 6.16 Foot brake lever
- 6.17 Side stand
- 6.18 Steering lock
- 6.19 Locking the steering
- 6.20 Unlocking the steering
7 COMBINATION INSTRUMENT
- 7.1 Combination instrument overview
- 7.2 Activation
- 7.3 Message on the combination instrument
- 7.4 Setting the combination instrument
- 7.5 Adjusting the kilometers or miles
- 7.6 Setting the clock
- 7.7 Setting the service display
- 7.8 Speed, time, and DST distance 1
- 7.9 Speed, time, and DST2 distance 2
- 7.10 AVG average speed, ART operating hours, and ODO total distance covered
8 PREPARING FOR USE
- 8.1 Advice on preparing for first use
- 8.2 Running-in the engine
- 8.3 Starting power of lithium-ion batteries at low temperatures
- 8.4 Preparing the vehicle for difficult operating conditions
- 8.5 Preparing the vehicle for riding on dry sand
- 8.6 Preparing the vehicle for riding on wet sand
- 8.7 Preparing the vehicle for riding on wet and muddy circuits
- 8.8 Preparing vehicle for high temperatures or slow riding
- 8.9 Preparing the vehicle for low temperatures or snow
9 RIDING INSTRUCTIONS
- 9.1 Checks and maintenance measures when preparing for use
- 9.2 Starting the vehicle
- 9.3 Starting off
- 9.4 Shifting, riding
- 9.5 Braking
- 9.6 Stopping, parking
- 9.7 Transporting
- 9.8 Refueling
10 SERVICE SCHEDULE
- 10.1 Additional information
- 10.2 Required work
- 10.3 Recommended work
11 TUNING THE CHASSIS
- 11.1 Checking the basic chassis setting with rider's weight
- 11.2 Compression damping of the shock absorber
- 11.3 Adjusting the low-speed compression damping of the shock absorber
- 11.4 Adjusting the high-speed compression damping of the shock absorber
- 11.5 Adjusting the rebound damping of the shock absorber
- 11.6 Measuring the dimension of the rear wheel unloaded
- 11.7 Checking the static sag of the shock absorber
- 11.8 Checking the riding sag of the shock absorber
- 11.9 Adjusting the spring preload of the shock absorber
- 11.10 Adjusting the riding sag
- 11.11 Checking the basic setting of the fork
- 11.12 Adjusting the compression damping of the fork
- 11.13 Adjusting the rebound damping of the fork
- 11.14 Adjusting the spring preload of the fork
- 11.15 Handlebar position
- 11.16 Adjusting the handlebar position
12 SERVICE WORK ON THE CHASSIS
- 12.1 Raising the motorcycle with a lift stand
- 12.2 Removing the motorcycle from the lift stand
- 12.3 Bleeding the fork legs
- 12.4 Cleaning the dust boots of the fork legs
- 12.5 Removing the fork protector
- 12.6 Installing the fork protector
- 12.7 Removing the fork legs
- 12.8 Installing the fork legs
- 12.9 Removing the lower triple clamp
- 12.10 Installing the lower triple clamp
- 12.11 Checking the steering head bearing play
- 12.12 Adjusting the steering head bearing play
- 12.13 Lubricating the steering head bearing
- 12.14 Removing front fender
- 12.15 Installing front fender
- 12.16 Removing the shock absorber
- 12.17 Installing the shock absorber
- 12.18 Removing the seat
- 12.19 Mounting the seat
- 12.20 Removing the air filter box cover
- 12.21 Installing the air filter box cover
- 12.22 Removing the air filter
- 12.23 Installing the air filter
- 12.24 Cleaning the air filter and air filter box
- 12.25 Removing the right side cover
- 12.26 Installing the right side cover
- 12.27 Removing the main silencer
- 12.28 Installing the main silencer
- 12.29 Cleaning the spark arrestor
- 12.30 Changing the glass fiber yarn filling in the main silencer
- 12.31 Removing the fuel tank
- 12.32 Installing the fuel tank
- 12.33 Checking for chain dirt accumulation
- 12.34 Cleaning the chain
- 12.35 Checking the chain tension
- 12.36 Adjusting the chain tension
- 12.37 Checking the chain, rear sprocket, engine sprocket, and chain guide
- 12.38 Checking the frame
- 12.39 Checking the link fork
- 12.40 Checking the throttle cable routing
- 12.41 Checking the rubber grip
- 12.42 Adjusting the basic position of the clutch lever
- 12.43 Checking/correcting the fluid level of hydraulic clutch
- 12.44 Changing the hydraulic clutch fluid
- 12.45 Removing the engine guard
- 12.46 Installing the engine guard
13 BRAKE SYSTEM
- 13.1 Adjusting the basic position of the hand brake lever
- 13.2 Checking the brake discs
- 13.3 Checking the front brake fluid level
- 13.4 Adding the front brake fluid
- 13.5 Checking the front brake linings
- 13.6 Changing the brake linings of the front brake
- 13.7 Checking the free travel of foot brake lever
- 13.8 Adjusting the basic position of the foot brake lever
- 13.9 Checking the rear brake fluid level
- 13.10 Adding rear brake fluid
- 13.11 Checking the rear brake linings
- 13.12 Changing the rear brake linings
14 WHEELS, TIRES
- 14.1 Removing the front wheel
- 14.2 Installing the front wheel
- 14.3 Removing the rear wheel
- 14.4 Installing the rear wheel
- 14.5 Checking the tire condition
- 14.6 Checking tire pressure
- 14.7 Checking spoke tension
15 ELECTRICAL SYSTEM
- 15.1 Removing the 12-V battery
- 15.2 Installing the 12-V battery
- 15.3 Charging the 12-V battery
- 15.4 Changing main fuse
- 15.5 Changing the fuses of individual electrical power consumers
- 15.6 Removing the headlight mask with the headlight
- 15.7 Installing the headlight mask with the headlight
- 15.8 Changing the headlight bulb
- 15.9 Changing the turn signal bulb
- 15.10 Checking the headlight setting
- 15.11 Adjusting the headlight range
- 15.12 Changing the combination instrument battery
- 15.13 Diagnostics connector
16 COOLING SYSTEM
- 16.1 Cooling system
- 16.2 Checking the antifreeze and coolant level
- 16.3 Checking the coolant level
- 16.4 Draining the coolant
- 16.5 Refilling with coolant
- 16.6 Changing the coolant
17 TUNING THE ENGINE
- 17.1 Checking the play in the throttle cable
- 17.2 Adjusting the play in the throttle cable
- 17.3 Adjusting the characteristic map of the throttle response
- 17.4 Adjusting the idle speed
- 17.5 Programming the throttle valve position
- 17.6 Checking the basic position of the shift lever
- 17.7 Adjusting the basic position of the shift lever
18 SERVICE WORK ON THE ENGINE
- 18.1 Changing the fuel screen
- 18.2 Checking the engine oil level
- 18.3 Changing the engine oil and oil filter, cleaning the oil screens
- 18.4 Adding engine oil
19 CLEANING, CARE
- 19.1 Cleaning the motorcycle
- 19.2 Checks and maintenance steps for winter operation
20 STORAGE
- 20.1 Storage
- 20.2 Preparing for use after storage
21 TROUBLESHOOTING
22 TECHNICAL DATA
- 22.1 Engine
- 22.2 Engine tightening torques
- 22.3 Capacities
  - 22.3.1 Engine oil
  - 22.3.2 Coolant
  - 22.3.3 Fuel
- 22.4 Chassis
- 22.5 Electrical system
- 22.6 Tires
- 22.7 Fork
- 22.8 Shock absorber
- 22.9 Chassis tightening torques
23 SUBSTANCES
24 AUXILIARY SUBSTANCES
25 STANDARDS
26 INDEX OF SPECIAL TERMS
27 LIST OF ABBREVIATIONS
28 LIST OF SYMBOLS
- 28.1 Yellow and orange symbols
- 28.2 Green and blue symbols
INDEX
- 1
- A
- B
- C
- D
- E
- F
- H
- I
- K
- L
- M
- O
- P
- R
- S
- T
- V
- W

Husqvarna FE 501s 2023 Owner's Manual

Husqvarna FE 501s 2023 Motorcycle manual cover

Pages 162

Year 2023

Language(s)

of 162

Husqvarna FE 501s 2023 Motorcycle Specification

The Husqvarna FE 501s 2023 is a high-performance dual-sport motorcycle engineered for both off-road and on-road versatility. At its core, the FE 501s is powered by a 510.9cc single-cylinder, four-stroke engine, which is renowned for its robust power delivery and efficiency. The engine features an advanced electronic fuel injection system, optimizing fuel delivery for consistent performance across various terrains. The motorcycle's lightweight chromium-molybdenum steel frame ensures durability and superior handling, while a composite carbon fiber subframe enhances its structural integrity without adding unnecessary weight.

Suspension duties are handled by WP XPLOR front forks and a WP XACT rear shock, both fully adjustable to accommodate different riding conditions and rider preferences. Braking is managed by high-performance Brembo calipers, paired with wave disc brakes for exceptional stopping power and control. The FE 501s also boasts a sophisticated electronics package, including traction control and selectable engine mapping, allowing riders to customize their experience based on terrain and skill level.

Ergonomically, the FE 501s features a streamlined seat and bodywork designed for maximum rider comfort and maneuverability. The bike is equipped with high-quality components such as ProTaper handlebars and ODI lock-on grips, which contribute to its premium feel. The digital instrument cluster provides essential information at a glance, including speed, RPM, and trip details, ensuring riders stay informed without distraction.

With a fuel tank capacity of approximately 2.2 gallons, the FE 501s offers a balance between range and weight, making it suitable for extended rides. The motorcycle's overall design reflects Husqvarna's commitment to blending advanced technology with practical functionality, making the FE 501s an ideal choice for riders seeking a versatile, high-performance dual-sport machine.

Husqvarna FE 501s 2023 Motorcycle F.A.Q.

What type of fuel should be used for the Husqvarna FE 501s 2023?

The Husqvarna FE 501s 2023 requires high-octane unleaded gasoline with a minimum octane rating of 95 RON for optimal performance.

How often should the engine oil be changed on the Husqvarna FE 501s 2023?

It is recommended to change the engine oil every 10 hours of riding or after every race for the Husqvarna FE 501s 2023 to maintain engine health and performance.

What is the recommended tire pressure for the Husqvarna FE 501s 2023?

The recommended tire pressure for the Husqvarna FE 501s 2023 is 12 psi (0.8 bar) for off-road use and 22 psi (1.5 bar) for road use.

How can I adjust the suspension settings on the Husqvarna FE 501s 2023?

To adjust the suspension settings, use the clicker adjustments located on the front forks and rear shock absorber to customize rebound and compression damping according to your riding style and terrain.

What should I do if the engine overheats on my Husqvarna FE 501s 2023?

If the engine overheats, stop riding immediately, let the engine cool down, check coolant levels, and inspect for any leaks or blockages in the radiator. Ensure proper ventilation and avoid prolonged idling in hot conditions.

How do I clean the air filter on the Husqvarna FE 501s 2023?

To clean the air filter, remove it from the airbox, wash it with a mild detergent in warm water, rinse thoroughly, let it dry, and then apply air filter oil before reinstalling it.

What maintenance is required for the chain on the Husqvarna FE 501s 2023?

Regularly clean and lubricate the chain after every ride, check for proper tension, and inspect for any signs of wear or damage. Adjust the chain tension as needed to ensure optimal performance.

How can I troubleshoot starting issues on the Husqvarna FE 501s 2023?

If the motorcycle has starting issues, check the battery charge, inspect the spark plug for wear, ensure the fuel is fresh, and verify that the kill switch is in the correct position.

What is the correct brake fluid type for the Husqvarna FE 501s 2023?

The Husqvarna FE 501s 2023 uses DOT 4 brake fluid for both front and rear braking systems. Regularly check and maintain proper fluid levels for optimal braking performance.

How do I adjust the clutch lever on the Husqvarna FE 501s 2023?

To adjust the clutch lever, use the adjuster screw located on the lever perch to set the desired free play and reach. Ensure there is a small amount of free play to prevent clutch slippage.