Contents

1 MEANS OF REPRESENTATION
- 1.1 Symbols used
- 1.2 Formats used
2 SAFETY ADVICE
- 2.1 Use definition intended use
- 2.2 Misuse
- 2.3 Safety advice
- 2.4 Degrees of risk and symbols
- 2.5 Overview of labels
- 2.6 Reporting safety defects
- 2.7 Noise emission warranty
- 2.8 Operating noise warning
- 2.9 Consumer rights
- 2.10 Tampering warning
- 2.11 Safe operation
- 2.12 Protective clothing
- 2.13 Work rules
- 2.14 Environment
- 2.15 Owner's Manual
3 IMPORTANT NOTES
- 3.1 Manufacturer and implied warranty
- 3.2 Fuel, auxiliary substances
- 3.3 Spare parts, accessories
- 3.4 Service
- 3.5 Figures
- 3.6 Customer service
4 VIEW OF VEHICLE
- 4.1 View of vehicle, front left (example)
- 4.2 View of vehicle, rear right (example)
5 SERIAL NUMBERS
- 5.1 Vehicle identification number
- 5.2 Type label
- 5.3 Key number
- 5.4 Engine number
- 5.5 Fork part number
- 5.6 Shock absorber article number
6 CONTROLS
- 6.1 Clutch lever
- 6.2 Hand brake lever
- 6.3 Throttle grip
- 6.4 Ignition lock
- 6.5 Emergency OFF switch
- 6.6 Start button
- 6.7 Horn button
- 6.8 Light switch
- 6.9 Turn signal switch
- 6.10 Overview of indicator lamps
- 6.11 Opening fuel tank filler cap
- 6.12 Closing the fuel tank filler cap
- 6.13 Cold start button
- 6.14 Idle speed adjusting screw
- 6.15 Shift lever
- 6.16 Foot brake lever
- 6.17 Side stand
- 6.18 Steering lock
- 6.19 Locking the steering
- 6.20 Unlocking the steering
7 COMBINATION INSTRUMENT
- 7.1 Combination instrument overview
- 7.2 Activation
- 7.3 Message on the combination instrument
- 7.4 Setting the combination instrument
- 7.5 Adjusting the kilometers or miles
- 7.6 Adjusting the clock
- 7.7 Setting the service display
- 7.8 Speed, time, and DST distance 1
- 7.9 Speed, time, and DST2 distance 2
- 7.10 AVG average speed, ART operating hours, and ODO total distance covered
8 PREPARING FOR USE
- 8.1 Advice on preparing for first use
- 8.2 Running-in the engine
- 8.3 Starting power of lithium-ion batteries at low temperatures
- 8.4 Preparing the vehicle for difficult operating conditions
- 8.5 Preparing the vehicle for riding on dry sand
- 8.6 Preparing the vehicle for riding on wet sand
- 8.7 Preparing the vehicle for riding on wet and muddy circuits
- 8.8 Preparing vehicle for high temperatures or slow riding
- 8.9 Preparing the vehicle for low temperatures or snow
9 RIDING INSTRUCTIONS
- 9.1 Checks and maintenance measures when preparing for use
- 9.2 Starting the vehicle
- 9.3 Starting off
- 9.4 Shifting, riding
- 9.5 Braking
- 9.6 Stopping, parking
- 9.7 Transporting
- 9.8 Refueling
10 SERVICE SCHEDULE
- 10.1 Additional information
- 10.2 Required work
- 10.3 Recommended work
11 TUNING THE CHASSIS
- 11.1 Checking the basic chassis setting with rider's weight
- 11.2 Compression damping of the shock absorber
- 11.3 Adjusting the low-speed compression damping of the shock absorber
- 11.4 Adjusting the high-speed compression damping of the shock absorber
- 11.5 Adjusting the rebound damping of the shock absorber
- 11.6 Measuring the dimension of the rear wheel unloaded
- 11.7 Checking the static sag of the shock absorber
- 11.8 Checking the riding sag of the shock absorber
- 11.9 Adjusting the spring preload of the shock absorber
- 11.10 Adjusting the riding sag
- 11.11 Checking the basic setting of the fork
- 11.12 Adjusting the compression damping of the fork
- 11.13 Adjusting the rebound damping of the fork
- 11.14 Adjusting the spring preload of the fork
- 11.15 Handlebar position
- 11.16 Adjusting the handlebar position
12 SERVICE WORK ON THE CHASSIS
- 12.1 Raising the motorcycle with a lift stand
- 12.2 Removing the motorcycle from the lift stand
- 12.3 Bleeding the fork legs
- 12.4 Cleaning the dust boots of the fork legs
- 12.5 Removing the fork protector
- 12.6 Installing the fork protector
- 12.7 Removing the fork legs
- 12.8 Installing the fork legs
- 12.9 Removing the lower triple clamp
- 12.10 Installing the lower triple clamp
- 12.11 Checking steering head bearing play
- 12.12 Adjusting the steering head bearing play
- 12.13 Lubricating the steering head bearing
- 12.14 Removing front fender
- 12.15 Installing front fender
- 12.16 Removing the shock absorber
- 12.17 Installing the shock absorber
- 12.18 Removing the seat
- 12.19 Mounting the seat
- 12.20 Removing the air filter box cover
- 12.21 Installing the air filter box cover
- 12.22 Removing the air filter
- 12.23 Installing the air filter
- 12.24 Cleaning the air filter and air filter box
- 12.25 Removing the right side cover
- 12.26 Installing the right side cover
- 12.27 Removing the main silencer
- 12.28 Installing the main silencer
- 12.29 Cleaning the spark arrestor
- 12.30 Changing the glass fiber yarn filling in the main silencer
- 12.31 Removing the fuel tank
- 12.32 Installing the fuel tank
- 12.33 Checking for chain dirt accumulation
- 12.34 Cleaning the chain
- 12.35 Checking the chain tension
- 12.36 Adjusting the chain tension
- 12.37 Checking the chain, rear sprocket, engine sprocket, and chain guide
- 12.38 Checking the frame
- 12.39 Checking the link fork
- 12.40 Checking throttle cable routing
- 12.41 Checking the rubber grip
- 12.42 Adjusting the basic position of the clutch lever
- 12.43 Checking/correcting the fluid level of hydraulic clutch
- 12.44 Changing the hydraulic clutch fluid
- 12.45 Removing the engine guard
- 12.46 Installing the engine guard
13 BRAKE SYSTEM
- 13.1 Adjusting the basic position of the hand brake lever
- 13.2 Checking the brake discs
- 13.3 Checking the front brake fluid level
- 13.4 Adding the front brake fluid
- 13.5 Checking the front brake linings
- 13.6 Changing the brake linings of the front brake
- 13.7 Checking the free travel of foot brake lever
- 13.8 Adjusting the basic position of the foot brake lever
- 13.9 Checking the rear brake fluid level
- 13.10 Adding rear brake fluid
- 13.11 Checking the rear brake linings
- 13.12 Changing the rear brake linings
14 WHEELS, TIRES
- 14.1 Removing the front wheel
- 14.2 Installing the front wheel
- 14.3 Removing the rear wheel
- 14.4 Installing the rear wheel
- 14.5 Checking the tire condition
- 14.6 Checking tire pressure
- 14.7 Checking spoke tension
15 ELECTRICAL SYSTEM
- 15.1 Removing the 12-V battery
- 15.2 Installing the 12-V battery
- 15.3 Charging the 12-V battery
- 15.4 Changing the main fuse
- 15.5 Changing the fuses of individual power consumers
- 15.6 Removing the headlight mask with the headlight
- 15.7 Installing the headlight mask with the headlight
- 15.8 Changing the headlight bulb
- 15.9 Changing the turn signal bulb
- 15.10 Checking the headlight setting
- 15.11 Adjusting the headlight range
- 15.12 Changing the combination instrument battery
- 15.13 Diagnostics connector
16 COOLING SYSTEM
- 16.1 Cooling system
- 16.2 Checking the antifreeze and coolant level
- 16.3 Checking the coolant level
- 16.4 Draining the coolant
- 16.5 Refilling with coolant
17 TUNING THE ENGINE
- 17.1 Checking the throttle cable play
- 17.2 Adjusting the throttle cable play
- 17.3 Adjusting the characteristic map of the throttle response
- 17.4 Adjusting the idle speed
- 17.5 Teaching the throttle valve position
- 17.6 Checking the basic position of the shift lever
- 17.7 Adjusting the basic position of the shift lever
18 SERVICE WORK ON THE ENGINE
- 18.1 Changing the fuel screen
- 18.2 Checking the engine oil level
- 18.3 Changing the engine oil and oil filter, cleaning the oil screens
- 18.4 Adding engine oil
19 CLEANING, CARE
- 19.1 Cleaning the motorcycle
- 19.2 Checks and maintenance steps for winter operation
20 STORAGE.
- 20.1 Storage
- 20.2 Preparing for use after storage
21 TROUBLESHOOTING
22 TECHNICAL DATA
- 22.1 Engine
- 22.2 Engine tightening torques
- 22.3 Capacities
  - 22.3.1 Engine oil
  - 22.3.2 Coolant
  - 22.3.3 Fuel
- 22.4 Chassis
- 22.5 Electrical system
- 22.6 Tires
- 22.7 Fork
- 22.8 Shock absorber
- 22.9 Chassis tightening torques
23 SUBSTANCES
24 AUXILIARY SUBSTANCES
25 STANDARDS
26 INDEX OF SPECIAL TERMS
27 LIST OF ABBREVIATIONS
28 LIST OF SYMBOLS
- 28.1 Yellow and orange symbols
- 28.2 Green and blue symbols
INDEX
- 1
- A
- B
- C
- D
- E
- F
- H
- I
- K
- L
- M
- O
- P
- R
- S
- T
- U
- V
- W

Husqvarna FE 501s 2020 Owner's Manual

Husqvarna FE 501s 2020 Motorcycle manual cover

Pages 161

Year 2020

Language(s)

of 161

Husqvarna FE 501s 2020 Motorcycle Specification

The Husqvarna FE 501s 2020 is a high-performance dual-sport motorcycle designed for both off-road and on-road riding. It features a 510.9cc, single-cylinder, SOHC, 4-stroke engine that delivers robust power and torque, ensuring excellent performance across varied terrains. The engine is paired with a 6-speed gearbox, which offers smooth and precise shifting for optimal control in diverse riding conditions.

This motorcycle is equipped with an advanced fuel injection system, enhancing fuel efficiency and ensuring consistent throttle response. The lightweight chromium-molybdenum steel frame contributes to the bike's agility, while the polyamide rear subframe provides additional strength and durability without adding unnecessary weight. The suspension system includes fully adjustable WP XPLOR forks at the front and a WP XACT shock absorber at the rear, both of which offer superior handling and comfort.

Braking is handled by high-performance Brembo brakes, featuring a 260mm front disc and a 220mm rear disc, providing reliable stopping power. The Husqvarna FE 501s 2020 also includes a multifunctional LCD display, offering essential information such as speed, trip distance, and gear position at a glance.

Ergonomically designed, the bike features a comfortable seat height of 950mm and a ground clearance of 355mm, making it suitable for a wide range of riders. The motorcycle's overall dry weight is approximately 110.8 kg, making it one of the lighter options in its class, enhancing maneuverability and ease of handling.

Other notable features include electric start, advanced cooling system, and high-quality components such as DID rims and ProTaper handlebars. The Husqvarna FE 501s 2020 is built to meet the demands of serious riders, offering a blend of power, agility, and durability in a versatile dual-sport package.

Husqvarna FE 501s 2020 Motorcycle F.A.Q.

What is the recommended oil type and capacity for the Husqvarna FE 501s 2020?

The recommended oil type for the Husqvarna FE 501s 2020 is 10W-50 synthetic oil. The engine oil capacity is approximately 1.2 liters (1.3 US qt) with a filter change.

How often should I change the air filter on my Husqvarna FE 501s 2020?

It is advised to inspect and clean the air filter after each ride in dusty conditions. Generally, replace the air filter every 10 hours of operation or as needed based on riding conditions.

What is the proper tire pressure for the Husqvarna FE 501s 2020?

The recommended tire pressure for the Husqvarna FE 501s 2020 is 12 psi (0.83 bar) for off-road use and 18 psi (1.24 bar) for on-road use. Adjust the pressure according to riding conditions and load.

How do I adjust the suspension settings on the Husqvarna FE 501s 2020?

To adjust the suspension, locate the compression and rebound adjusters on the front forks and rear shock. For the front forks, use the clickers at the top and bottom of the fork legs. For the rear shock, adjust the clickers located at the top and bottom of the shock body. Adjust settings based on your riding style and terrain.

What are the common troubleshooting steps if the Husqvarna FE 501s 2020 does not start?

Start by checking the battery charge and connections. Ensure the fuel system is functioning by checking the fuel level and fuel pump. Verify that the spark plug is in good condition and properly connected. If the problem persists, consult the service manual or a professional mechanic.

How can I extend the lifespan of my Husqvarna FE 501s 2020 chain and sprockets?

Regularly clean and lubricate the chain with a high-quality chain lubricant. Check for proper tension and alignment often. Replace the chain and sprockets as a set when they show signs of excessive wear to ensure optimal performance and longevity.

What should I do if the engine of my Husqvarna FE 501s 2020 overheats?

Stop riding immediately to prevent damage. Allow the engine to cool down. Check the coolant level and look for any leaks. Ensure the radiator is clean and not blocked by mud or debris. If overheating persists, have the cooling system inspected by a professional.

How do I properly store my Husqvarna FE 501s 2020 during the off-season?

Clean the motorcycle thoroughly and apply a protective wax. Change the oil and filter, and fill the fuel tank with stabilized fuel. Disconnect the battery and store it in a cool, dry place. Elevate the bike to prevent tire flat spots, and cover it with a breathable motorcycle cover.

What is the process for checking valve clearance on the Husqvarna FE 501s 2020?

To check valve clearance, remove the valve cover and use a feeler gauge to measure the gap between the valve stem and the rocker arm. Refer to the service manual for the specific clearance values. Adjust the valves if necessary by replacing the shims to achieve the correct clearance.

How do I reset the maintenance reminder on the Husqvarna FE 501s 2020?

To reset the maintenance reminder, turn the ignition key to the "ON" position while holding down the trip meter reset button. Continue to hold the button until the maintenance icon disappears from the display, indicating that the reset was successful.