Contents

1 MEANS OF REPRESENTATION
- 1.1 Symbols used
- 1.2 Formats used
2 SAFETY ADVICE
- 2.1 Use definition intended use
- 2.2 Misuse
- 2.3 Safety advice
- 2.4 Degrees of risk and symbols
- 2.5 Tampering warning
- 2.6 Safe operation
- 2.7 Protective clothing
- 2.8 Work rules
- 2.9 Environment
- 2.10 Owner's Manual
3 IMPORTANT NOTES
- 3.1 Manufacturer warranty, implied warranty
- 3.2 Fuel, auxiliary substances
- 3.3 Spare parts, accessories
- 3.4 Service
- 3.5 Figures
- 3.6 Customer service
4 VIEW OF VEHICLE
- 4.1 View of vehicle, front left (example)
- 4.2 View of vehicle, rear right (example)
5 SERIAL NUMBERS
- 5.1 Vehicle identification number
- 5.2 Type label (All EU models)
- 5.3 Key number (All EU models)
- 5.4 Engine number
- 5.5 Fork part number
- 5.6 Shock absorber article number
6 CONTROLS
- 6.1 Clutch lever
- 6.2 Hand brake lever
- 6.3 Throttle grip
- 6.4 Stop button
- 6.5 Horn button (All EU models)
- 6.6 Light switch (All EU models)
- 6.7 Light switch (US)
- 6.8 Turn signal switch (All EU models)
- 6.9 Emergency OFF switch (All EU models)
- 6.10 Start button
- 6.11 Combination switch
- 6.12 Overview of indicator lights (All EU models)
- 6.13 Overview of indicator lights (US)
- 6.14 Opening fuel tank filler cap
- 6.15 Closing the fuel tank filler cap
- 6.16 Cold start button
- 6.17 Idle speed adjusting screw
- 6.18 Shift lever
- 6.19 Foot brake lever
- 6.20 Side stand
- 6.21 Steering lock (All EU models)
- 6.22 Locking the steering (All EU models)
- 6.23 Unlocking the steering (All EU models)
7 COMBINATION INSTRUMENT
- 7.1 Combination instrument overview
- 7.2 Activation
- 7.3 Message on the combination instrument
- 7.4 Setting the combination instrument
- 7.5 Adjusting the kilometers or miles
- 7.6 Setting the clock
- 7.7 Setting the service display
- 7.8 Speed, time, and DST distance 1
- 7.9 Speed, time, and DST2 distance 2
- 7.10 AVG average speed, ART operating hours, and ODO total distance covered
8 PREPARING FOR USE
- 8.1 Advice on preparing for first use
- 8.2 Running-in the engine
- 8.3 Starting power of lithium-ion batteries at low temperatures
- 8.4 Preparing the vehicle for difficult operating conditions
- 8.5 Preparing the vehicle for riding on dry sand
- 8.6 Preparing the vehicle for riding on wet sand
- 8.7 Preparing the vehicle for riding on wet and muddy circuits
- 8.8 Preparing vehicle for high temperatures or slow riding
- 8.9 Preparing the vehicle for low temperatures or snow
9 RIDING INSTRUCTIONS
- 9.1 Checks and maintenance measures when preparing for use
- 9.2 Starting the vehicle
- 9.3 Activating traction control
- 9.4 Starting off
- 9.5 Shifting, riding
- 9.6 Braking
- 9.7 Stopping, parking
- 9.8 Transporting
- 9.9 Refueling
10 SERVICE SCHEDULE
- 10.1 Additional information
- 10.2 Required work
- 10.3 Recommended work
11 TUNING THE CHASSIS
- 11.1 Checking the basic chassis setting with rider's weight
- 11.2 Compression damping of the shock absorber
- 11.3 Adjusting the low-speed compression damping of the shock absorber
- 11.4 Adjusting the high-speed compression damping of the shock absorber
- 11.5 Adjusting the rebound damping of the shock absorber
- 11.6 Measuring the dimension of the rear wheel unloaded
- 11.7 Checking the static sag of the shock absorber
- 11.8 Checking the riding sag of the shock absorber
- 11.9 Adjusting the spring preload of the shock absorber
- 11.10 Adjusting the riding sag
- 11.11 Checking the basic setting of the fork
- 11.12 Adjusting the compression damping of the fork
- 11.13 Adjusting the rebound damping of the fork
- 11.14 Adjusting the spring preload of the fork
- 11.15 Handlebar position
- 11.16 Adjusting the handlebar position
12 SERVICE WORK ON THE CHASSIS
- 12.1 Raising the motorcycle with a lift stand
- 12.2 Removing the motorcycle from the lift stand
- 12.3 Bleeding the fork legs
- 12.4 Cleaning the dust boots of the fork legs
- 12.5 Removing the fork protector
- 12.6 Installing the fork protector
- 12.7 Removing the fork legs
- 12.8 Installing the fork legs
- 12.9 Removing the lower triple clamp
- 12.10 Installing the lower triple clamp
- 12.11 Checking the steering head bearing play
- 12.12 Adjusting the steering head bearing play
- 12.13 Lubricating the steering head bearing
- 12.14 Removing front fender
- 12.15 Installing front fender
- 12.16 Removing the shock absorber
- 12.17 Installing the shock absorber
- 12.18 Removing the seat
- 12.19 Mounting the seat
- 12.20 Removing the air filter box cover
- 12.21 Installing the air filter box cover
- 12.22 Removing the air filter
- 12.23 Installing the air filter
- 12.24 Cleaning the air filter and air filter box
- 12.25 Removing the right side cover
- 12.26 Installing the right side cover
- 12.27 Removing the main silencer
- 12.28 Installing the main silencer
- 12.29 Cleaning the spark arrestor (US)
- 12.30 Changing the glass fiber yarn filling in the main silencer
- 12.31 Removing the fuel tank
- 12.32 Installing the fuel tank
- 12.33 Checking for chain dirt accumulation
- 12.34 Cleaning the chain
- 12.35 Checking the chain tension
- 12.36 Adjusting the chain tension
- 12.37 Checking the chain, rear sprocket, engine sprocket, and chain guide
- 12.38 Checking the frame
- 12.39 Checking the link fork
- 12.40 Checking the throttle cable routing
- 12.41 Checking the rubber grip
- 12.42 Adjusting the basic position of the clutch lever
- 12.43 Checking/correcting the fluid level of hydraulic clutch
- 12.44 Changing the hydraulic clutch fluid
- 12.45 Removing the engine guard
- 12.46 Installing the engine guard
13 BRAKE SYSTEM
- 13.1 Adjusting the basic position of the hand brake lever
- 13.2 Checking the brake discs
- 13.3 Checking the front brake fluid level
- 13.4 Adding the front brake fluid
- 13.5 Checking the front brake linings
- 13.6 Changing the brake linings of the front brake
- 13.7 Checking the free travel of foot brake lever
- 13.8 Adjusting the basic position of the foot brake lever
- 13.9 Checking the rear brake fluid level
- 13.10 Adding rear brake fluid
- 13.11 Checking the rear brake linings
- 13.12 Changing the rear brake linings
14 WHEELS, TIRES
- 14.1 Removing the front wheel
- 14.2 Installing the front wheel
- 14.3 Removing the rear wheel
- 14.4 Installing the rear wheel
- 14.5 Checking the tire condition
- 14.6 Checking tire pressure
- 14.7 Checking spoke tension
15 ELECTRICAL SYSTEM
- 15.1 Removing the 12-V battery
- 15.2 Installing the 12-V battery
- 15.3 Charging the 12-V battery
- 15.4 Changing main fuse
- 15.5 Changing the fuses of individual electrical power consumers
- 15.6 Removing the headlight mask with the headlight
- 15.7 Installing the headlight mask with the headlight
- 15.8 Changing the headlight bulb
- 15.9 Changing the turn signal bulb (All EU models)
- 15.10 Checking the headlight setting
- 15.11 Adjusting the headlight range
- 15.12 Changing the combination instrument battery
- 15.13 Diagnostics connector
16 COOLING SYSTEM
- 16.1 Cooling system
- 16.2 Checking the antifreeze and coolant level
- 16.3 Checking the coolant level
- 16.4 Draining the coolant
- 16.5 Refilling with coolant
- 16.6 Changing the coolant
17 TUNING THE ENGINE
- 17.1 Checking the play in the throttle cable
- 17.2 Adjusting the play in the throttle cable
- 17.3 Adjusting the characteristic map of the throttle response
- 17.4 Changing the mapping
- 17.5 Adjusting the idle speed
- 17.6 Programming the throttle valve position
- 17.7 Checking the basic position of the shift lever
- 17.8 Adjusting the basic position of the shift lever
18 SERVICE WORK ON THE ENGINE
- 18.1 Changing the fuel screen
- 18.2 Checking the engine oil level
- 18.3 Changing the engine oil and oil filter, cleaning the oil screens
- 18.4 Adding engine oil
19 CLEANING, CARE
- 19.1 Cleaning the motorcycle
- 19.2 Checks and maintenance steps for winter operation
20 STORAGE
- 20.1 Storage
- 20.2 Preparing for use after storage
21 TROUBLESHOOTING
22 BLINK CODE
23 TECHNICAL DATA
- 23.1 Engine
- 23.2 Engine tightening torques
- 23.3 Capacities
  - 23.3.1 Engine oil
  - 23.3.2 Coolant
  - 23.3.3 Fuel
- 23.4 Chassis
- 23.5 Electrical system
- 23.6 Tires
- 23.7 Fork
- 23.8 Shock absorber
- 23.9 Chassis tightening torques
24 SUBSTANCES
25 AUXILIARY SUBSTANCES
26 STANDARDS
27 INDEX OF SPECIAL TERMS
28 LIST OF ABBREVIATIONS
29 LIST OF SYMBOLS
- 29.1 Yellow and orange symbols
- 29.2 Green and blue symbols
INDEX
- 1
- A
- B
- C
- D
- E
- F
- H
- I
- K
- L
- M
- O
- P
- R
- S
- T
- V
- W

Husqvarna FE 450 2022 Owner's Manual

Husqvarna FE 450 2022 Motorcycle manual cover

Pages 168

Year 2022

Language(s)

of 168

Husqvarna FE 450 2022 Motorcycle Specification

The Husqvarna FE 450 2022 motorcycle is an advanced off-road machine engineered for high performance and durability. It features a robust 449.9cc, single-cylinder, 4-stroke engine that delivers exceptional power and torque, making it ideal for challenging terrains. The engine is equipped with advanced electronic fuel injection (EFI) and a Keihin EMS system, ensuring precise throttle response and optimal fuel efficiency. A lightweight chromium-molybdenum steel frame contributes to the motorcycle's excellent handling and stability, while the carbon fiber subframe enhances its overall structural integrity.

The FE 450 is fitted with WP XPLOR front forks and a WP XACT rear shock absorber, both fully adjustable to provide superior suspension performance across varying conditions. The braking system includes high-performance Brembo calipers and GSK wave discs, delivering reliable stopping power. The motorcycle also features an electric starter and a robust 6-speed transmission with an integrated DDS (Dampened Diaphragm Steel) clutch, ensuring smooth and effortless gear changes.

Ergonomically designed, the Husqvarna FE 450 boasts a slim profile, offering riders enhanced control and comfort during long rides. The ProTaper handlebars, grippy seat cover, and adjustable footpegs further enhance rider comfort and customization. The bike is equipped with a state-of-the-art multifunctional digital instrument display, providing essential information at a glance.

In terms of aesthetics, the FE 450 sports a sleek design with high-quality graphics and durable bodywork. The fuel tank has a capacity of approximately 2.2 gallons, providing sufficient range for extensive off-road excursions. With a dry weight of around 240 pounds, the Husqvarna FE 450 2022 is a lightweight yet powerful option for serious off-road enthusiasts seeking a reliable and high-performing motorcycle.

Husqvarna FE 450 2022 Motorcycle F.A.Q.

What is the recommended break-in procedure for the Husqvarna FE 450 2022?

To properly break-in your Husqvarna FE 450 2022, ride gently for the first 1,000 km (620 miles), avoid full-throttle starts, and refrain from maintaining a constant speed for extended periods. Gradually increase engine speed and load.

How often should the oil be changed on the Husqvarna FE 450 2022?

It is recommended to change the engine oil every 10 hours of operation or after every race, whichever comes first, to ensure optimal engine performance and longevity.

What type of coolant is best for the Husqvarna FE 450 2022?

Use a high-quality ethylene glycol-based coolant with corrosion inhibitors, specifically designed for aluminum engines, mixed at a 50:50 ratio with distilled water.

How can I adjust the suspension settings on my Husqvarna FE 450 2022 for trail riding?

For trail riding, soften the suspension by reducing the compression damping and increasing rebound damping. Adjust the preload to suit your weight and riding style. Consult the owner's manual for detailed settings.

What should I do if my Husqvarna FE 450 2022 won't start?

Check the battery charge, ensure the fuel is fresh, and verify the kill switch is in the correct position. Examine the spark plug for fouling and replace if necessary.

How do I maintain the chain on the Husqvarna FE 450 2022?

Regularly clean and lubricate the chain using a quality chain lube. Check chain tension every ride and adjust as necessary to prevent excessive wear or damage.

What are the tire pressure recommendations for the Husqvarna FE 450 2022?

For optimal performance, maintain a tire pressure of approximately 12 psi (0.8 bar) in both front and rear tires, adjusting slightly based on terrain and rider preference.

How often should I replace the air filter on my Husqvarna FE 450 2022?

Inspect the air filter after every ride, especially in dusty conditions. Replace or clean it every 10 hours of riding or more frequently if riding in extremely dusty conditions.

What is the correct spark plug gap for the Husqvarna FE 450 2022?

The correct spark plug gap for the Husqvarna FE 450 2022 is 0.6-0.7 mm (0.024-0.028 inches). Ensure the gap is set accurately for optimal engine performance.

How do I adjust the clutch lever position on the Husqvarna FE 450 2022?

To adjust the clutch lever position, loosen the lock nut on the adjuster screw, turn the screw to achieve the desired lever position, and retighten the lock nut. Ensure the lever has proper free play.