Contents

1 MEANS OF REPRESENTATION
- 1.1 Symbols used
- 1.2 Formats used
2 SAFETY ADVICE
- 2.1 Use definition intended use
- 2.2 Safety advice
- 2.3 Degrees of risk and symbols
- 2.4 Tampering warning
- 2.5 Safe operation
- 2.6 Protective clothing
- 2.7 Work rules
- 2.8 Environment
- 2.9 Owner's Manual
3 IMPORTANT NOTES
- 3.1 Manufacturer and implied warranty
- 3.2 Operating and auxiliary substances
- 3.3 Spare parts, accessories
- 3.4 Service
- 3.5 Figures
- 3.6 Customer service
4 VIEW OF VEHICLE
- 4.1 View of vehicle, front left (example)
- 4.2 View of vehicle, rear right (example)
5 SERIAL NUMBERS
- 5.1 Chassis number
- 5.2 Type label (FE EU/AU)
- 5.3 Key number (FE EU/AU)
- 5.4 Engine number
- 5.5 Fork part number
- 5.6 Shock absorber article number
6 CONTROLS
- 6.1 Clutch lever
- 6.2 Hand brake lever
- 6.3 Throttle grip
- 6.4 Kill switch (FE EU/AU)
- 6.5 Kill switch (FE US)
- 6.6 Horn button (FE EU/AU)
- 6.7 Light switch (FE EU/AU)
- 6.8 Light switch (FE US)
- 6.9 Turn signal switch (FE EU/AU)
- 6.10 Emergency OFF switch (FE AU)
- 6.11 Electric starter button (FE EU/US)
- 6.12 Electric starter button (FE AU)
- 6.13 Overview of indicator lamps (FE EU/AU)
- 6.14 Overview of indicator lamps (FE US)
- 6.15 Opening the filler cap
- 6.16 Closing the filler cap
- 6.17 Idle speed adjusting screw
- 6.18 Shift lever
- 6.19 Foot brake lever
- 6.20 Side stand
- 6.21 Steering lock (FE EU/AU)
- 6.22 Locking the steering (FE EU/AU)
- 6.23 Unlocking the steering (FE EU/AU)
7 SPEEDOMETER
- 7.1 Overview
- 7.2 Activation
- 7.3 Message on the speedometer
- 7.4 Setting the speedometer
- 7.5 Setting the kilometers or miles
- 7.6 Setting the clock
- 7.7 Setting the service display
- 7.8 Speed, time, and DST distance 1
- 7.9 Speed, time, and DST2 distance 2
- 7.10 AVG average speed, ART operating hours, and ODO total distance covered
8 PREPARING FOR USE
- 8.1 Advice on first use
- 8.2 Running-in the engine
- 8.3 Preparing the vehicle for difficult riding conditions
- 8.4 Preparing for rides on dry sand
- 8.5 Preparing for rides on wet sand
- 8.6 Preparing for rides on wet and muddy surfaces
- 8.7 Preparing for rides at high temperature and slow speed
- 8.8 Preparing for rides at low temperature or in snow
9 RIDING INSTRUCTIONS
- 9.1 Checks and maintenance work when preparing for use
- 9.2 Starting
- 9.3 Starting off
- 9.4 Shifting, riding
- 9.5 Braking
- 9.6 Stopping, parking
- 9.7 Transport
- 9.8 Refueling
10 SERVICE SCHEDULE
- 10.1 Service schedule
- 10.2 Service work (as additional order)
11 TUNING THE CHASSIS
- 11.1 Checking the basic chassis setting with the rider's weight
- 11.2 Compression damping of shock absorber
- 11.3 Adjusting the low-speed compression damping of the shock absorber
- 11.4 Adjusting the high-speed compression damping of the shock absorber
- 11.5 Adjusting the rebound damping of the shock absorber
- 11.6 Measuring rear wheel sag unloaded
- 11.7 Checking the static sag of the shock absorber
- 11.8 Checking the riding sag of the shock absorber
- 11.9 Adjusting the spring preload of the shock absorber
- 11.10 Adjusting the riding sag
- 11.11 Checking basic setting of fork
- 11.12 Adjusting the compression damping of the fork
- 11.13 Adjusting the rebound damping of the fork
- 11.14 Handlebar position
- 11.15 Adjusting the handlebar position
12 SERVICE WORK ON THE CHASSIS
- 12.1 Raising the motorcycle with a lift stand
- 12.2 Removing the motorcycle from the lift stand
- 12.3 Bleeding the fork legs
- 12.4 Cleaning the dust boots of the fork legs
- 12.5 Removing the fork protector
- 12.6 Installing the fork protector
- 12.7 Removing the fork legs
- 12.8 Installing the fork legs
- 12.9 Removing the lower triple clamp
- 12.10 Installing the lower triple clamp
- 12.11 Checking the steering head bearing play
- 12.12 Adjusting the steering head bearing play
- 12.13 Lubricating the steering head bearing
- 12.14 Removing the front fender
- 12.15 Installing the front fender
- 12.16 Removing the shock absorber
- 12.17 Installing the shock absorber
- 12.18 Removing the seat
- 12.19 Mounting the seat
- 12.20 Removing the air filter box lid
- 12.21 Installing the air filter box lid
- 12.22 Removing the air filter
- 12.23 Installing the air filter
- 12.24 Cleaning the air filter and air filter box
- 12.25 Sealing the air filter box
- 12.26 Removing the manifold
- 12.27 Installing the manifold
- 12.28 Removing the main silencer
- 12.29 Cleaning the spark arrestor (FE US)
- 12.30 Installing the main silencer
- 12.31 Changing the glass fiber yarn filling of the main silencer
- 12.32 Removing the right side cover
- 12.33 Installing the right side cover
- 12.34 Removing the fuel tank
- 12.35 Installing the fuel tank
- 12.36 Checking for chain dirt accumulation
- 12.37 Cleaning the chain
- 12.38 Checking the chain tension
- 12.39 Adjusting the chain tension
- 12.40 Checking the chain, rear sprocket, engine sprocket and chain guide
- 12.41 Checking the frame
- 12.42 Checking the swingarm
- 12.43 Checking the routing of the throttle cable
- 12.44 Checking the rubber grip
- 12.45 Additionally securing the rubber grip
- 12.46 Adjusting the basic position of the clutch lever
- 12.47 Checking/rectifying the fluid level of the hydraulic clutch
- 12.48 Changing the hydraulic clutch fluid
- 12.49 Removing the engine guard
- 12.50 Installing the engine guard
13 BRAKE SYSTEM
- 13.1 Checking free travel of hand brake lever
- 13.2 Adjusting free travel of hand brake lever (FE EU/AU)
- 13.3 Adjusting the basic position of the hand brake lever (FE US)
- 13.4 Checking the brake discs
- 13.5 Checking the front brake fluid level
- 13.6 Adding front brake fluid
- 13.7 Checking the front brake linings
- 13.8 Changing the front brake linings
- 13.9 Checking the free travel of foot brake lever
- 13.10 Adjusting the basic position of the foot brake lever
- 13.11 Checking the rear brake fluid level
- 13.12 Adding rear brake fluid
- 13.13 Checking the rear brake linings
- 13.14 Changing the rear brake linings
14 WHEELS, TIRES
- 14.1 Removing the front wheel
- 14.2 Installing the front wheel
- 14.3 Removing the rear wheel
- 14.4 Installing the rear wheel
- 14.5 Checking the tire condition
- 14.6 Checking the tire air pressure
- 14.7 Checking spoke tension
15 ELECTRICAL SYSTEM
- 15.1 Removing the battery
- 15.2 Installing the battery
- 15.3 Charging the battery
- 15.4 Changing the main fuse
- 15.5 Changing the fuses of individual power consumers
- 15.6 Removing the headlight mask with the headlight
- 15.7 Installing the headlight mask with the headlight
- 15.8 Changing the headlight bulb
- 15.9 Changing the turn signal bulb
- 15.10 Checking the headlight setting
- 15.11 Adjusting the headlight range
- 15.12 Changing the speedometer battery
16 COOLING SYSTEM
- 16.1 Cooling system
- 16.2 Checking the antifreeze and coolant level
- 16.3 Checking the coolant level
- 16.4 Draining the coolant
- 16.5 Refilling coolant
17 TUNING THE ENGINE
- 17.1 Checking the play in the throttle cable
- 17.2 Adjusting the play in the throttle cable
- 17.3 Adjusting the idle speed
- 17.4 Checking the basic position of the shift lever
- 17.5 Adjusting the basic position of the shift lever
18 SERVICE WORK ON THE ENGINE
- 18.1 Changing the fuel screen
- 18.2 Checking the engine oil level
- 18.3 Changing the engine oil and oil filter, cleaning the oil screens
- 18.4 Adding engine oil
19 CLEANING, CARE
- 19.1 Cleaning the motorcycle
- 19.2 Checks and maintenance steps for winter operation
20 STORAGE
- 20.1 Storage
- 20.2 Preparing for use after storage
21 TROUBLESHOOTING
22 BLINK CODE
23 TECHNICAL DATA
- 23.1 Engine
- 23.2 Engine tightening torques
- 23.3 Capacities
  - 23.3.1 Engine oil
  - 23.3.2 Coolant
  - 23.3.3 Fuel
- 23.4 Chassis
- 23.5 Electrical system
- 23.6 Tires
- 23.7 Fork
- 23.8 Shock absorber
- 23.9 Chassis tightening torques
24 SUBSTANCES
25 AUXILIARY SUBSTANCES
26 STANDARDS
27 LIST OF ABBREVIATIONS
28 LISY OF SYMBOLS
- 28.1 Yellow and orange symbols
- 28.2 Green and blue symbols
INDEX
- A
- B
- C
- D
- E
- F
- H
- I
- K
- L
- M
- O
- P
- R
- S
- T
- U
- V
- W

Husqvarna FE 450 2016 Owner's Manual

Husqvarna FE 450 2016 Motorcycle manual cover

Pages 123

Year 2016

Language(s)

of 123

Husqvarna FE 450 2016 Motorcycle Specification

The Husqvarna FE 450 2016 Motorcycle is a high-performance enduro machine designed for versatility and power. It is powered by a 449.3cc single-cylinder, 4-stroke, SOHC engine that delivers robust performance across a wide range of terrains. The engine features Keihin electronic fuel injection and a 42mm throttle body, ensuring precise fuel delivery and optimal efficiency. It is paired with a 6-speed transmission, providing smooth and adaptable gear shifts for various riding conditions.

The FE 450's lightweight chromium-molybdenum steel frame offers excellent stability and handling, while the polyamide rear subframe contributes to the bike's overall lightness and rigidity. The suspension system includes WP Performance Systems front forks with 300mm of travel and a WP rear shock absorber with linkage, offering superior damping and comfort on rough trails.

Braking performance is ensured by high-quality components, with a 260mm front disc brake and a 220mm rear disc brake, both equipped with Brembo calipers. The motorcycle rides on robust aluminum rims with CNC-machined hubs, wrapped in enduro-specific tires that provide excellent grip and durability.

Ergonomics are tailored for demanding off-road use, featuring a slim profile, comfortable seat, and adjustable handlebar position to accommodate various rider preferences. The FE 450 also comes equipped with an electric starter for convenience, supported by a reliable lithium-ion battery.

Overall, the Husqvarna FE 450 2016 Motorcycle combines advanced engineering with high-quality components to deliver a powerful, agile, and reliable enduro bike suitable for both professional and amateur riders.

Husqvarna FE 450 2016 Motorcycle F.A.Q.

What is the recommended oil type for the Husqvarna FE 450 2016?

The recommended oil type for the Husqvarna FE 450 2016 is 10W-50 fully synthetic engine oil.

How often should the air filter be cleaned or replaced?

The air filter should be checked after every ride in dusty conditions and cleaned or replaced as necessary. Generally, inspect it every 10-15 hours of use.

How can I adjust the suspension on my Husqvarna FE 450 2016 for a smoother ride?

To adjust the suspension, refer to the owner's manual for the recommended settings based on your weight and riding conditions. Adjust the preload, compression, and rebound settings accordingly.

What is the proper tire pressure for the Husqvarna FE 450 2016?

The recommended tire pressure is typically 12-15 psi for off-road riding. Adjust the pressure based on terrain and personal preference.

How do I troubleshoot a starting problem with the Husqvarna FE 450 2016?

First, check the battery charge and connections. Ensure the fuel is fresh and the spark plug is clean and properly gapped. If the issue persists, consult a professional mechanic.

What maintenance tasks should be performed regularly on the Husqvarna FE 450 2016?

Regular maintenance includes oil changes every 10-15 hours, checking and cleaning the air filter, inspecting the chain tension, and checking the brake pads and fluid levels.

How do I adjust the chain tension on my Husqvarna FE 450 2016?

To adjust the chain tension, place the bike on a stand, loosen the rear axle nut, and adjust the chain tensioner bolts until the chain has about 1-1.5 inches of slack, then retighten the axle nut.

What should I do if my Husqvarna FE 450 2016 overheats?

If the bike overheats, stop immediately and let it cool down. Check the coolant level and ensure the radiator is not blocked. Avoid riding in extremely hot conditions and maintain adequate airflow to the engine.

How can I improve the fuel efficiency of my Husqvarna FE 450 2016?

To improve fuel efficiency, ensure regular maintenance is performed, such as keeping the air filter clean, maintaining proper tire pressure, and using high-quality fuel. Riding smoothly without rapid acceleration can also help.

What is the correct spark plug gap for the Husqvarna FE 450 2016?

The correct spark plug gap for the Husqvarna FE 450 2016 is typically 0.7-0.8 mm. Always refer to the owner's manual for the exact specifications.