Contents

1 MEANS OF REPRESENTATION
- 1.1 Symbols used
- 1.2 Formats used
2 SAFETY ADVICE
- 2.1 Use definition intended use
- 2.2 Misuse
- 2.3 Safety advice
- 2.4 Degrees of risk and symbols
- 2.5 Overview of labels
- 2.6 Reporting safety defects
- 2.7 Noise emission warranty
- 2.8 Manufacturer warranty for the exhaust monitoring system
- 2.9 Operating noise warning
- 2.10 Consumer rights
- 2.11 Tampering warning
- 2.12 Safe operation
- 2.13 Protective clothing
- 2.14 Work rules
- 2.15 Environment
- 2.16 Owner's Manual
3 IMPORTANT NOTES
- 3.1 Manufacturer warranty, implied warranty
- 3.2 Fuel, auxiliary substances
- 3.3 Spare parts, accessories
- 3.4 Service
- 3.5 Figures
- 3.6 Customer service
4 VIEW OF VEHICLE
- 4.1 View of vehicle, front left (example)
- 4.2 View of vehicle, rear right (example)
5 SERIAL NUMBERS
- 5.1 Vehicle identification number
- 5.2 Type label
- 5.3 Key number
- 5.4 Engine number
- 5.5 Fork part number
- 5.6 Shock absorber article number
6 CONTROLS
- 6.1 Clutch lever
- 6.2 Hand brake lever
- 6.3 Throttle grip
- 6.4 Ignition lock
- 6.5 Emergency OFF switch
- 6.6 Start button
- 6.7 Horn button
- 6.8 Light switch
- 6.9 Turn signal switch
- 6.10 Overview of indicator lamps
- 6.11 Opening fuel tank filler cap
- 6.12 Closing the fuel tank filler cap
- 6.13 Cold start button
- 6.14 Idle speed adjusting screw
- 6.15 Shift lever
- 6.16 Foot brake lever
- 6.17 Side stand
- 6.18 Steering lock
- 6.19 Locking the steering
- 6.20 Unlocking the steering
7 COMBINATION INSTRUMENT
- 7.1 Combination instrument overview
- 7.2 Activation
- 7.3 Message on the combination instrument
- 7.4 Setting the combination instrument
- 7.5 Adjusting the kilometers or miles
- 7.6 Setting the clock
- 7.7 Setting the service display
- 7.8 Speed, time, and DST distance 1
- 7.9 Speed, time, and DST2 distance 2
- 7.10 AVG average speed, ART operating hours, and ODO total distance covered
8 PREPARING FOR USE
- 8.1 Advice on preparing for first use
- 8.2 Running-in the engine
- 8.3 Starting power of lithium-ion batteries at low temperatures
- 8.4 Preparing the vehicle for difficult operating conditions
- 8.5 Preparing the vehicle for riding on dry sand
- 8.6 Preparing the vehicle for riding on wet sand
- 8.7 Preparing the vehicle for riding on wet and muddy circuits
- 8.8 Preparing vehicle for high temperatures or slow riding
- 8.9 Preparing the vehicle for low temperatures or snow
9 RIDING INSTRUCTIONS
- 9.1 Checks and maintenance measures when preparing for use
- 9.2 Starting the vehicle
- 9.3 Starting off
- 9.4 Shifting, riding
- 9.5 Braking
- 9.6 Stopping, parking
- 9.7 Transporting
- 9.8 Refueling
10 SERVICE SCHEDULE
- 10.1 Additional information
- 10.2 Required work
- 10.3 Recommended work
11 TUNING THE CHASSIS
- 11.1 Checking the basic chassis setting with rider's weight
- 11.2 Compression damping of the shock absorber
- 11.3 Adjusting the low-speed compression damping of the shock absorber
- 11.4 Adjusting the high-speed compression damping of the shock absorber
- 11.5 Adjusting the rebound damping of the shock absorber
- 11.6 Measuring the dimension of the rear wheel unloaded
- 11.7 Checking the static sag of the shock absorber
- 11.8 Checking the riding sag of the shock absorber
- 11.9 Adjusting the spring preload of the shock absorber
- 11.10 Adjusting the riding sag
- 11.11 Checking the basic setting of the fork
- 11.12 Adjusting the compression damping of the fork
- 11.13 Adjusting the rebound damping of the fork
- 11.14 Adjusting the spring preload of the fork
- 11.15 Handlebar position
- 11.16 Adjusting the handlebar position
12 SERVICE WORK ON THE CHASSIS
- 12.1 Raising the motorcycle with a lift stand
- 12.2 Removing the motorcycle from the lift stand
- 12.3 Bleeding the fork legs
- 12.4 Cleaning the dust boots of the fork legs
- 12.5 Removing the fork protector
- 12.6 Installing the fork protector
- 12.7 Removing the fork legs
- 12.8 Installing the fork legs
- 12.9 Removing the lower triple clamp
- 12.10 Installing the lower triple clamp
- 12.11 Checking the steering head bearing play
- 12.12 Adjusting the steering head bearing play
- 12.13 Lubricating the steering head bearing
- 12.14 Removing front fender
- 12.15 Installing front fender
- 12.16 Removing the shock absorber
- 12.17 Installing the shock absorber
- 12.18 Removing the seat
- 12.19 Mounting the seat
- 12.20 Removing the air filter box cover
- 12.21 Installing the air filter box cover
- 12.22 Removing the air filter
- 12.23 Installing the air filter
- 12.24 Cleaning the air filter and air filter box
- 12.25 Removing the right side cover
- 12.26 Installing the right side cover
- 12.27 Removing the main silencer
- 12.28 Installing the main silencer
- 12.29 Cleaning the spark arrestor
- 12.30 Changing the glass fiber yarn filling in the main silencer
- 12.31 Removing the fuel tank
- 12.32 Installing the fuel tank
- 12.33 Checking for chain dirt accumulation
- 12.34 Cleaning the chain
- 12.35 Checking the chain tension
- 12.36 Adjusting the chain tension
- 12.37 Checking the chain, rear sprocket, engine sprocket, and chain guide
- 12.38 Checking the frame
- 12.39 Checking the link fork
- 12.40 Checking the throttle cable routing
- 12.41 Checking the rubber grip
- 12.42 Adjusting the basic position of the clutch lever
- 12.43 Checking/correcting the fluid level of hydraulic clutch
- 12.44 Changing the hydraulic clutch fluid
- 12.45 Removing the engine guard
- 12.46 Installing the engine guard
13 BRAKE SYSTEM
- 13.1 Adjusting the basic position of the hand brake lever
- 13.2 Checking brake discs
- 13.3 Checking the front brake fluid level
- 13.4 Adding front brake fluid
- 13.5 Checking the front brake linings
- 13.6 Changing the brake linings of the front brake
- 13.7 Checking the free travel of foot brake lever
- 13.8 Adjusting the basic position of the foot brake lever
- 13.9 Checking the rear brake fluid level
- 13.10 Adding rear brake fluid
- 13.11 Checking the brake linings of the rear brake
- 13.12 Changing the rear brake linings
14 WHEELS, TIRES
- 14.1 Removing the front wheel
- 14.2 Installing the front wheel
- 14.3 Removing the rear wheel
- 14.4 Installing the rear wheel
- 14.5 Checking the tire condition
- 14.6 Checking tire pressure
- 14.7 Checking spoke tension
15 ELECTRICAL SYSTEM
- 15.1 Removing the 12-V battery
- 15.2 Installing the 12-V battery
- 15.3 Charging the 12-V battery
- 15.4 Changing main fuse
- 15.5 Changing the fuses of individual electrical power consumers
- 15.6 Removing the headlight mask with the headlight
- 15.7 Installing the headlight mask with the headlight
- 15.8 Changing the headlight bulb
- 15.9 Changing the turn signal bulb
- 15.10 Checking the headlight setting
- 15.11 Adjust the headlight range.
- 15.12 Changing the combination instrument battery
- 15.13 Diagnostics connector
16 COOLING SYSTEM
- 16.1 Cooling system
- 16.2 Checking the antifreeze and coolant level
- 16.3 Checking the coolant level
- 16.4 Draining the coolant
- 16.5 Refilling with coolant
- 16.6 Changing the coolant
17 TUNING THE ENGINE
- 17.1 Checking the play in the throttle cable
- 17.2 Adjusting the play in the throttle cable
- 17.3 Adjusting the characteristic map of the throttle response
- 17.4 Adjusting the idle speed
- 17.5 Programming the throttle valve position
- 17.6 Checking the basic position of the shift lever
- 17.7 Adjusting the basic position of the shift lever
18 SERVICE WORK ON THE ENGINE
- 18.1 Changing the fuel screen
- 18.2 Checking the engine oil level
- 18.3 Changing the engine oil and oil filter, cleaning the oil screen
- 18.4 Adding engine oil
19 CLEANING, CARE
- 19.1 Cleaning the motorcycle
- 19.2 Checks and maintenance steps for winter operation
20 STORAGE
- 20.1 Storage
- 20.2 Preparing for use after storage
21 TROUBLESHOOTING
22 TECHNICAL DATA
- 22.1 Engine
- 22.2 Engine tightening torques
- 22.3 Capacities
  - 22.3.1 Engine oil
  - 22.3.2 Coolant
  - 22.3.3 Fuel
- 22.4 Chassis
- 22.5 Electrical system
- 22.6 Tires
- 22.7 Fork
- 22.8 Shock absorber
- 22.9 Chassis tightening torques
23 SUBSTANCES
24 AUXILIARY SUBSTANCES
25 STANDARDS
26 INDEX OF SPECIAL TERMS
27 LIST OF ABBREVIATIONS
28 LIST OF SYMBOLS
- 28.1 Yellow and orange symbols
- 28.2 Green and blue symbols
INDEX
- 1
- A
- B
- C
- D
- E
- F
- H
- I
- K
- L
- M
- O
- P
- R
- S
- T
- V
- W

Husqvarna FE 350s 2022 Owner's Manual

Husqvarna FE 350s 2022 Motorcycle manual cover

Pages 162

Year 2022

Language(s)

of 162

Husqvarna FE 350s 2022 Motorcycle Specification

The Husqvarna FE 350s 2022 is a dual-sport motorcycle engineered for versatility and performance across diverse terrains. It is powered by a 349.7cc single-cylinder, four-stroke engine designed to deliver a balanced mix of power and efficiency. The engine features advanced electronic fuel injection and a six-speed gearbox with a DDS (Damped Diaphragm Steel) clutch, which ensures smooth and reliable power delivery. The frame is a chromium-molybdenum steel construction, providing an optimal blend of rigidity and flexibility, enhancing handling and rider feedback.

Suspension duties are handled by WP XPLOR forks at the front and a WP XACT shock absorber at the rear, both fully adjustable to accommodate different riding conditions and preferences. The motorcycle also includes top-tier braking components, featuring a 260 mm front disc and a 220 mm rear disc, both equipped with Brembo calipers for superior stopping power. The bike's ergonomics are designed for rider comfort and control, with a slim profile, low seat height, and high-grip footpegs.

The Husqvarna FE 350s comes equipped with advanced electronics, including switchable engine mapping and traction control, allowing riders to customize their riding experience. Its lightweight yet robust design includes a composite carbon fiber subframe and aluminum swingarm, contributing to an overall weight of approximately 109.3 kg (240.8 lbs) without fuel. The fuel tank has a capacity of 8.5 liters, providing ample range for extended rides. A multifunctional digital display offers critical information at a glance, ensuring the rider stays informed and focused on the trail.

In summary, the Husqvarna FE 350s 2022 is a high-performance, adaptable motorcycle that combines advanced engineering and cutting-edge technology to deliver an exceptional dual-sport riding experience.

Husqvarna FE 350s 2022 Motorcycle F.A.Q.

What is the recommended oil type and capacity for the Husqvarna FE 350s 2022?

The recommended engine oil for the Husqvarna FE 350s 2022 is a premium synthetic 10W-50. The oil capacity is approximately 1.2 liters (1.27 US quarts).

How often should I change the air filter on my Husqvarna FE 350s 2022?

It is recommended to inspect and clean the air filter after every ride, especially in dusty conditions. Replace it every 15 hours of riding or if it shows signs of damage or excessive dirt.

What are the tire pressure specifications for the Husqvarna FE 350s 2022?

For optimal performance, maintain a tire pressure of approximately 1.0 bar (14.5 psi) for off-road use. Adjust based on terrain and riding conditions.

How do I adjust the suspension settings on the Husqvarna FE 350s 2022?

To adjust the suspension, refer to the owner's manual for baseline settings. Use the clickers on the forks and shock absorber to adjust compression and rebound. Make small adjustments and test ride to find the best setup for your weight and riding style.

What is the break-in procedure for a new Husqvarna FE 350s 2022 motorcycle?

During the first 1-2 hours of riding, avoid full throttle and high RPMs. Vary the engine speed and avoid prolonged idling to ensure proper engine break-in. Check and tighten all fasteners after the initial ride.

How can I troubleshoot starting issues with my Husqvarna FE 350s 2022?

First, check the battery charge and connections. Ensure the fuel is fresh and the fuel valve is open. Inspect the spark plug for wear or fouling. If the problem persists, inspect the fuel pump and ignition system.

What is the recommended chain tension for the Husqvarna FE 350s 2022?

The chain should have approximately 55 mm (2.17 inches) of slack measured midway between the front and rear sprockets. Adjust the chain tension using the adjusters on the rear axle.

How do I replace the brake pads on a Husqvarna FE 350s 2022?

To replace the brake pads, first remove the caliper from the disc. Take out the old pads and push the caliper pistons back. Insert new pads, ensuring they are correctly seated, and reattach the caliper. Test the brakes before riding.

What should I do if the engine overheats on my Husqvarna FE 350s 2022?

If the engine overheats, stop immediately and let it cool down. Check the coolant level and ensure the radiator is not clogged with dirt. Inspect the cooling fan and thermostat for proper operation. Avoid riding in extreme heat conditions.

How do I prepare my Husqvarna FE 350s 2022 for long-term storage?

For long-term storage, clean the motorcycle thoroughly and lubricate all moving parts. Drain the fuel system or add a fuel stabilizer. Disconnect the battery and store it in a cool, dry place. Elevate the motorcycle to prevent tire degradation. Cover it to protect from dust and moisture.