Contents

1 MEANS OF REPRESENTATION
- 1.1 Symbols used
- 1.2 Formats used
2 SAFETY ADVICE
- 2.1 Use definition intended use
- 2.2 Misuse
- 2.3 Safety advice
- 2.4 Degrees of risk and symbols
- 2.5 Overview of labels
- 2.6 Reporting safety defects
- 2.7 Noise emission warranty
- 2.8 Manufacturer warranty for the exhaust monitoring system
- 2.9 Operating noise warning
- 2.10 Consumer rights
- 2.11 Tampering warning
- 2.12 Safe operation
- 2.13 Protective clothing
- 2.14 Work rules
- 2.15 Environment
- 2.16 Owner's Manual
3 IMPORTANT NOTES
- 3.1 Manufacturer warranty, implied warranty
- 3.2 Fuel, auxiliary substances
- 3.3 Spare parts, accessories
- 3.4 Service
- 3.5 Figures
- 3.6 Customer service
4 VIEW OF VEHICLE
- 4.1 View of vehicle, front left (example)
- 4.2 View of vehicle, rear right (example)
5 SERIAL NUMBERS
- 5.1 Vehicle identification number
- 5.2 Type label
- 5.3 Key number
- 5.4 Engine number
- 5.5 Fork part number
- 5.6 Shock absorber article number
6 CONTROLS
- 6.1 Clutch lever
- 6.2 Hand brake lever
- 6.3 Throttle grip
- 6.4 Ignition lock
- 6.5 Emergency OFF switch
- 6.6 Start button
- 6.7 Horn button
- 6.8 Light switch
- 6.9 Turn signal switch
- 6.10 Overview of indicator lamps
- 6.11 Opening fuel tank filler cap
- 6.12 Closing the fuel tank filler cap
- 6.13 Cold start button
- 6.14 Idle speed adjusting screw
- 6.15 Shift lever
- 6.16 Foot brake lever
- 6.17 Side stand
- 6.18 Steering lock
- 6.19 Locking the steering
- 6.20 Unlocking the steering
7 COMBINATION INSTRUMENT
- 7.1 Combination instrument overview
- 7.2 Activation
- 7.3 Message on the combination instrument
- 7.4 Setting the combination instrument
- 7.5 Adjusting the kilometers or miles
- 7.6 Adjusting the clock
- 7.7 Setting the service display
- 7.8 Speed, time, and DST distance 1
- 7.9 Speed, time, and DST2 distance 2
- 7.10 AVG average speed, ART operating hours, and ODO total distance covered
8 PREPARING FOR USE
- 8.1 Advice on preparing for first use
- 8.2 Running-in the engine
- 8.3 Starting power of lithium-ion batteries at low temperatures
- 8.4 Preparing the vehicle for difficult operating conditions
- 8.5 Preparing the vehicle for riding on dry sand
- 8.6 Preparing the vehicle for riding on wet sand
- 8.7 Preparing the vehicle for riding on wet and muddy circuits
- 8.8 Preparing vehicle for high temperatures or slow riding
- 8.9 Preparing the vehicle for low temperatures or snow
9 RIDING INSTRUCTIONS
- 9.1 Checks and maintenance measures when preparing for use
- 9.2 Starting the vehicle
- 9.3 Starting off
- 9.4 Shifting, riding
- 9.5 Braking
- 9.6 Stopping, parking
- 9.7 Transporting
- 9.8 Refueling
10 SERVICE SCHEDULE
- 10.1 Additional information
- 10.2 Required work
- 10.3 Recommended work
11 TUNING THE CHASSIS
- 11.1 Checking the basic chassis setting with rider's weight
- 11.2 Compression damping of the shock absorber
- 11.3 Adjusting the low-speed compression damping of the shock absorber
- 11.4 Adjusting the high-speed compression damping of the shock absorber
- 11.5 Adjusting the rebound damping of the shock absorber
- 11.6 Measuring the dimension of the rear wheel unloaded
- 11.7 Checking the static sag of the shock absorber
- 11.8 Checking the riding sag of the shock absorber
- 11.9 Adjusting the spring preload of the shock absorber
- 11.10 Adjusting the riding sag
- 11.11 Checking the basic setting of the fork
- 11.12 Adjusting the compression damping of the fork
- 11.13 Adjusting the rebound damping of the fork
- 11.14 Adjusting the spring preload of the fork
- 11.15 Handlebar position
- 11.16 Adjusting the handlebar position
12 SERVICE WORK ON THE CHASSIS
- 12.1 Raising the motorcycle with a lift stand
- 12.2 Removing the motorcycle from the lift stand
- 12.3 Bleeding the fork legs
- 12.4 Cleaning the dust boots of the fork legs
- 12.5 Removing the fork protector
- 12.6 Installing the fork protector
- 12.7 Removing the fork legs
- 12.8 Installing the fork legs
- 12.9 Removing the lower triple clamp
- 12.10 Installing the lower triple clamp
- 12.11 Checking steering head bearing play
- 12.12 Adjusting the steering head bearing play
- 12.13 Lubricating the steering head bearing
- 12.14 Removing front fender
- 12.15 Installing front fender
- 12.16 Removing the shock absorber
- 12.17 Installing the shock absorber
- 12.18 Removing the seat
- 12.19 Mounting the seat
- 12.20 Removing the air filter box cover
- 12.21 Installing the air filter box cover
- 12.22 Removing the air filter
- 12.23 Installing the air filter
- 12.24 Cleaning the air filter and air filter box
- 12.25 Removing the right side cover
- 12.26 Installing the right side cover
- 12.27 Removing the main silencer
- 12.28 Installing the main silencer
- 12.29 Cleaning the spark arrestor
- 12.30 Changing the glass fiber yarn filling in the main silencer
- 12.31 Removing the fuel tank
- 12.32 Installing the fuel tank
- 12.33 Checking for chain dirt accumulation
- 12.34 Cleaning the chain
- 12.35 Checking the chain tension
- 12.36 Adjusting the chain tension
- 12.37 Checking the chain, rear sprocket, engine sprocket, and chain guide
- 12.38 Checking the frame
- 12.39 Checking the link fork
- 12.40 Checking throttle cable routing
- 12.41 Checking the rubber grip
- 12.42 Adjusting the basic position of the clutch lever
- 12.43 Checking/correcting the fluid level of hydraulic clutch
- 12.44 Changing the hydraulic clutch fluid
- 12.45 Removing the engine guard
- 12.46 Installing the engine guard
13 BRAKE SYSTEM
- 13.1 Adjusting the basic position of the hand brake lever
- 13.2 Checking the brake discs
- 13.3 Checking the front brake fluid level
- 13.4 Adding the front brake fluid
- 13.5 Checking the front brake linings
- 13.6 Changing the front brake linings
- 13.7 Checking the free travel of foot brake lever
- 13.8 Adjusting the basic position of the foot brake lever
- 13.9 Checking the rear brake fluid level
- 13.10 Adding rear brake fluid
- 13.11 Checking the rear brake linings
- 13.12 Changing the rear brake linings
14 WHEELS, TIRES
- 14.1 Removing the front wheel
- 14.2 Installing the front wheel
- 14.3 Removing the rear wheel
- 14.4 Installing the rear wheel
- 14.5 Checking the tire condition
- 14.6 Checking tire pressure
- 14.7 Checking spoke tension
15 ELECTRICAL SYSTEM
- 15.1 Removing the 12-V battery
- 15.2 Installing the 12-V battery
- 15.3 Charging the 12-V battery
- 15.4 Changing main fuse
- 15.5 Changing the fuses of individual power consumers
- 15.6 Removing the headlight mask with the headlight
- 15.7 Installing the headlight mask with the headlight
- 15.8 Changing the headlight bulb
- 15.9 Changing the turn signal bulb
- 15.10 Checking the headlight setting
- 15.11 Adjust the headlight range.
- 15.12 Changing the combination instrument battery
- 15.13 Diagnostics connector
16 COOLING SYSTEM
- 16.1 Cooling system
- 16.2 Checking the antifreeze and coolant level
- 16.3 Checking the coolant level
- 16.4 Draining the coolant
- 16.5 Refilling with coolant
- 16.6 Changing the coolant
17 TUNING THE ENGINE
- 17.1 Checking the throttle cable play
- 17.2 Adjusting the throttle cable play
- 17.3 Adjusting the characteristic map of the throttle response
- 17.4 Adjusting the idle speed
- 17.5 Teaching the throttle valve position
- 17.6 Checking the basic position of the shift lever
- 17.7 Adjusting the basic position of the shift lever
18 SERVICE WORK ON THE ENGINE
- 18.1 Changing the fuel screen
- 18.2 Checking the engine oil level
- 18.3 Changing the engine oil and oil filter, cleaning the oil screen
- 18.4 Adding engine oil
19 CLEANING, CARE
- 19.1 Cleaning the motorcycle
- 19.2 Checks and maintenance steps for winter operation
20 STORAGE
- 20.1 Storage
- 20.2 Preparing for use after storage
21 TROUBLESHOOTING
22 TECHNICAL DATA
- 22.1 Engine
- 22.2 Engine tightening torques
- 22.3 Capacities
  - 22.3.1 Engine oil
  - 22.3.2 Coolant
  - 22.3.3 Fuel
- 22.4 Chassis
- 22.5 Electrical system
- 22.6 Tires
- 22.7 Fork
- 22.8 Shock absorber
- 22.9 Chassis tightening torques
23 SUBSTANCES
24 AUXILIARY SUBSTANCES
25 STANDARDS
26 INDEX OF SPECIAL TERMS
27 LIST OF ABBREVIATIONS
28 LIST OF SYMBOLS
- 28.1 Yellow and orange symbols
- 28.2 Green and blue symbols
INDEX
- 1
- A
- B
- C
- D
- E
- F
- H
- I
- K
- L
- M
- O
- P
- R
- S
- T
- V
- W

Husqvarna FE 350s 2021 Owner's Manual

Husqvarna FE 350s 2021 Motorcycle manual cover

Pages 162

Year 2021

Language(s)

of 162

Husqvarna FE 350s 2021 Motorcycle Specification

The Husqvarna FE 350s 2021 is a high-performance dual-sport motorcycle engineered for versatility and endurance. Powered by a 349.7cc liquid-cooled, single-cylinder, 4-stroke engine, it delivers a robust power output optimized for both off-road agility and on-road compliance. The engine features advanced fuel injection and an electric starter for reliable and efficient operation.

The frame is constructed from lightweight chromium-molybdenum steel, ensuring a balance of strength and agility. The suspension system comprises WP XPLOR forks at the front and a WP XACT shock absorber at the rear, both fully adjustable to provide superior handling and comfort across varied terrains.

The FE 350s incorporates a 6-speed transmission with a DDS (Damped Diaphragm Steel) clutch, enhancing shifting smoothness and durability. Its braking system includes high-performance Brembo hydraulic disc brakes, offering exceptional stopping power and control.

The motorcycle's design focuses on ergonomics and rider comfort, featuring a slim profile, a low seat height of 950mm, and a lightweight construction of just 109.5 kg without fuel. The fuel tank capacity is 2.2 gallons, ensuring ample range for extended rides.

Additional features include an integrated cooling system with radiators that are intelligently positioned for optimal heat dissipation, and a Keihin EMS (Engine Management System) that ensures precise engine mapping and throttle response. The motorcycle also comes equipped with high-quality Metzeler 6 Days Extreme tires, providing excellent traction and stability.

Overall, the Husqvarna FE 350s 2021 is a meticulously crafted machine that caters to the demands of both competitive off-road racing and everyday road use, combining advanced engineering with practical functionality.

Husqvarna FE 350s 2021 Motorcycle F.A.Q.

What type of fuel should I use for my Husqvarna FE 350s 2021?

The Husqvarna FE 350s 2021 is designed to run on unleaded gasoline with an octane rating of at least 95 RON. Using the proper fuel ensures optimal performance and longevity of the engine.

How often should I change the engine oil on my FE 350s 2021?

For regular maintenance, it is recommended to change the engine oil every 15 hours of use or as specified in the owner's manual, especially if the motorcycle is used in demanding conditions.

Which type of oil is recommended for the Husqvarna FE 350s 2021?

Husqvarna recommends using fully synthetic 4-stroke motorcycle oil with a viscosity of 10W-50 for the FE 350s 2021. This ensures adequate lubrication and performance.

How do I adjust the suspension settings for different terrains on the FE 350s 2021?

The FE 350s 2021 features adjustable suspension. Consult the owner's manual for recommended settings based on your weight and terrain type. Typically, softer settings are better for rough terrains, while stiffer settings suit smoother surfaces.

What should I do if the electric starter on my FE 350s 2021 fails to work?

First, check the battery charge and connections. Ensure the kill switch is in the correct position. If the starter still fails, inspect the starter relay and wiring for faults. Consult a professional if the issue persists.

How can I maintain the air filter on my Husqvarna FE 350s 2021?

Regularly inspect and clean the air filter after every ride, especially in dusty conditions. Use an air filter cleaner and ensure it's dry before re-oiling and reinstalling. Replace the filter if it's damaged.

What tire pressure is recommended for the FE 350s 2021?

For optimal performance, maintain a tire pressure of 12-15 psi in the front and 12-15 psi in the rear, depending on the terrain. Lower pressures are suitable for off-road conditions, while higher pressures are better for on-road use.

How do I troubleshoot a misfiring engine on the FE 350s 2021?

Check the spark plug for wear or fouling and replace it if necessary. Inspect the ignition coil and wiring for damage. Ensure the fuel system is clean and the air filter is not clogged.

How can I keep the chain properly maintained on my FE 350s 2021?

Regularly clean the chain with a suitable chain cleaner. Lubricate the chain with a motorcycle-specific chain lube after every ride or as needed. Ensure proper tension to avoid premature wear.

What should I do if my FE 350s 2021 engine overheats?

Stop the motorcycle and allow the engine to cool down. Check the coolant level and top up if necessary. Inspect the radiator for obstructions and ensure that the fan is operational. Avoid riding in extreme conditions if overheating persists.