Contents

1 MEANS OF REPRESENTATION
- 1.1 Symbols used
- 1.2 Formats used
2 SAFETY ADVICE
- 2.1 Use definition intended use
- 2.2 Misuse
- 2.3 Safety advice
- 2.4 Degrees of risk and symbols
- 2.5 Tampering warning
- 2.6 Safe operation
- 2.7 Protective clothing
- 2.8 Work rules
- 2.9 Environment
- 2.10 Owner's Manual
3 IMPORTANT NOTES
- 3.1 Manufacturer warranty, implied warranty
- 3.2 Fuel, auxiliary substances
- 3.3 Spare parts, accessories
- 3.4 Service
- 3.5 Figures
- 3.6 Customer service
4 VIEW OF VEHICLE
- 4.1 View of vehicle, front left (example)
- 4.2 View of vehicle, rear right (example)
5 SERIAL NUMBERS
- 5.1 Vehicle identification number
- 5.2 Type label
- 5.3 Key number
- 5.4 Engine number
- 5.5 Fork part number
- 5.6 Shock absorber article number
6 CONTROLS
- 6.1 Clutch lever
- 6.2 Hand brake lever
- 6.3 Throttle grip
- 6.4 Stop button
- 6.5 Horn button
- 6.6 Light switch
- 6.7 Turn signal switch
- 6.8 Emergency OFF switch
- 6.9 Start button
- 6.10 Combination switch (FE 350 EU)
- 6.11 Overview of indicator lamps
- 6.12 Opening fuel tank filler cap
- 6.13 Closing the fuel tank filler cap
- 6.14 Cold start button
- 6.15 Idle speed adjusting screw
- 6.16 Shift lever
- 6.17 Foot brake lever
- 6.18 Side stand
- 6.19 Steering lock
- 6.20 Locking the steering
- 6.21 Unlocking the steering
7 COMBINATION INSTRUMENT
- 7.1 Combination instrument overview
- 7.2 Activation
- 7.3 Message on the combination instrument
- 7.4 Setting the combination instrument
- 7.5 Adjusting the kilometers or miles
- 7.6 Setting the clock
- 7.7 Setting the service display
- 7.8 Speed, time, and DST distance 1
- 7.9 Speed, time, and DST2 distance 2
- 7.10 AVG average speed, ART operating hours, and ODO total distance covered
8 PREPARING FOR USE
- 8.1 Advice on preparing for first use
- 8.2 Running-in the engine
- 8.3 Starting power of lithium-ion batteries at low temperatures
- 8.4 Preparing the vehicle for difficult operating conditions
- 8.5 Preparing the vehicle for riding on dry sand
- 8.6 Preparing the vehicle for riding on wet sand
- 8.7 Preparing the vehicle for riding on wet and muddy circuits
- 8.8 Preparing vehicle for high temperatures or slow riding
- 8.9 Preparing the vehicle for low temperatures or snow
9 RIDING INSTRUCTIONS
- 9.1 Checks and maintenance measures when preparing for use
- 9.2 Starting the vehicle
- 9.3 Activating traction control
- 9.4 Starting off
- 9.5 Shifting, riding
- 9.6 Braking
- 9.7 Stopping, parking
- 9.8 Transporting
- 9.9 Refueling
10 SERVICE SCHEDULE
- 10.1 Additional information
- 10.2 Required work
- 10.3 Recommended work
11 TUNING THE CHASSIS
- 11.1 Checking the basic chassis setting with rider's weight
- 11.2 Compression damping of the shock absorber
- 11.3 Adjusting the low-speed compression damping of the shock absorber
- 11.4 Adjusting the high-speed compression damping of the shock absorber
- 11.5 Adjusting the rebound damping of the shock absorber
- 11.6 Measuring the dimension of the rear wheel unloaded
- 11.7 Checking the static sag of the shock absorber
- 11.8 Checking the riding sag of the shock absorber
- 11.9 Adjusting the spring preload of the shock absorber
- 11.10 Adjusting the riding sag
- 11.11 Checking the basic setting of the fork
- 11.12 Adjusting the compression damping of the fork
- 11.13 Adjusting the rebound damping of the fork
- 11.14 Adjusting the spring preload of the fork
- 11.15 Handlebar position
- 11.16 Adjusting the handlebar position
12 SERVICE WORK ON THE CHASSIS
- 12.1 Raising the motorcycle with a lift stand
- 12.2 Removing the motorcycle from the lift stand
- 12.3 Bleeding the fork legs
- 12.4 Cleaning the dust boots of the fork legs
- 12.5 Removing the fork protector
- 12.6 Installing the fork protector
- 12.7 Removing the fork legs
- 12.8 Installing the fork legs
- 12.9 Removing the lower triple clamp
- 12.10 Installing the lower triple clamp
- 12.11 Checking the steering head bearing play
- 12.12 Adjusting the steering head bearing play
- 12.13 Lubricating the steering head bearing
- 12.14 Removing front fender
- 12.15 Installing front fender
- 12.16 Removing the shock absorber
- 12.17 Installing the shock absorber
- 12.18 Removing the seat
- 12.19 Mounting the seat
- 12.20 Removing the air filter box cover
- 12.21 Installing the air filter box cover
- 12.22 Removing the air filter
- 12.23 Installing the air filter
- 12.24 Cleaning the air filter and air filter box
- 12.25 Removing the right side cover
- 12.26 Installing the right side cover
- 12.27 Removing the main silencer
- 12.28 Installing the main silencer
- 12.29 Changing the glass fiber yarn filling in the main silencer
- 12.30 Removing the fuel tank
- 12.31 Installing the fuel tank
- 12.32 Checking for chain dirt accumulation
- 12.33 Cleaning the chain
- 12.34 Checking the chain tension
- 12.35 Adjusting the chain tension
- 12.36 Checking the chain, rear sprocket, engine sprocket, and chain guide
- 12.37 Checking the frame
- 12.38 Checking the link fork
- 12.39 Checking the throttle cable routing
- 12.40 Checking the rubber grip
- 12.41 Adjusting the basic position of the clutch lever
- 12.42 Checking/correcting the fluid level of hydraulic clutch
- 12.43 Changing the hydraulic clutch fluid
- 12.44 Removing the engine guard
- 12.45 Installing the engine guard
13 BRAKE SYSTEM
- 13.1 Adjusting the basic position of the hand brake lever
- 13.2 Checking brake discs
- 13.3 Checking the front brake fluid level
- 13.4 Adding front brake fluid
- 13.5 Checking the front brake linings
- 13.6 Changing the brake linings of the front brake
- 13.7 Checking the free travel of foot brake lever
- 13.8 Adjusting the basic position of the foot brake lever
- 13.9 Checking the rear brake fluid level
- 13.10 Adding rear brake fluid
- 13.11 Checking the brake linings of the rear brake
- 13.12 Changing the rear brake linings
14 WHEELS, TIRES
- 14.1 Removing the front wheel
- 14.2 Installing the front wheel
- 14.3 Removing the rear wheel
- 14.4 Installing the rear wheel
- 14.5 Checking the tire condition
- 14.6 Checking tire pressure
- 14.7 Checking spoke tension
15 ELECTRICAL SYSTEM
- 15.1 Removing the 12-V battery
- 15.2 Installing the 12-V battery
- 15.3 Charging the 12-V battery
- 15.4 Changing main fuse
- 15.5 Changing the fuses of individual electrical power consumers
- 15.6 Removing the headlight mask with the headlight
- 15.7 Installing the headlight mask with the headlight
- 15.8 Changing the headlight bulb
- 15.9 Changing the turn signal bulb
- 15.10 Checking the headlight setting
- 15.11 Adjust the headlight range.
- 15.12 Changing the combination instrument battery
- 15.13 Diagnostics connector
16 COOLING SYSTEM
- 16.1 Cooling system
- 16.2 Checking the antifreeze and coolant level
- 16.3 Checking the coolant level
- 16.4 Draining the coolant
- 16.5 Refilling with coolant
- 16.6 Changing the coolant
17 TUNING THE ENGINE
- 17.1 Checking the play in the throttle cable
- 17.2 Adjusting the play in the throttle cable
- 17.3 Adjusting the characteristic map of the throttle response
- 17.4 Changing the mapping (FE 350 EU)
- 17.5 Adjusting the idle speed
- 17.6 Programming the throttle valve position
- 17.7 Checking the basic position of the shift lever
- 17.8 Adjusting the basic position of the shift lever
18 SERVICE WORK ON THE ENGINE
- 18.1 Changing the fuel screen
- 18.2 Checking the engine oil level
- 18.3 Changing the engine oil and oil filter, cleaning the oil screen
- 18.4 Adding engine oil
19 CLEANING, CARE
- 19.1 Cleaning the motorcycle
- 19.2 Checks and maintenance steps for winter operation
20 STORAGE
- 20.1 Storage
- 20.2 Preparing for use after storage
21 TROUBLESHOOTING
22 BLINK CODE
23 TECHNICAL DATA
- 23.1 Engine
- 23.2 Engine tightening torques
- 23.3 Capacities
  - 23.3.1 Engine oil
  - 23.3.2 Coolant
  - 23.3.3 Fuel
- 23.4 Chassis
- 23.5 Electrical system
- 23.6 Tires
- 23.7 Fork
- 23.8 Shock absorber
- 23.9 Chassis tightening torques
24 SUBSTANCES
25 AUXILIARY SUBSTANCES
26 STANDARDS
27 INDEX OF SPECIAL TERMS
28 LIST OF ABBREVIATIONS
29 LIST OF SYMBOLS
- 29.1 Yellow and orange symbols
- 29.2 Green and blue symbols
INDEX
- 1
- A
- B
- C
- D
- E
- F
- H
- I
- K
- L
- M
- O
- P
- R
- S
- T
- V
- W

Husqvarna FE 350 2023 Owner's Manual

Husqvarna FE 350 2023 Motorcycle manual cover

Pages 161

Year 2023

Language(s)

of 161

Husqvarna FE 350 2023 Motorcycle Specification

The Husqvarna FE 350 2023 Motorcycle represents a refined blend of power, agility, and advanced engineering, designed specifically for enduro enthusiasts. This machine is powered by a 349.7cc, single-cylinder, 4-stroke engine that delivers a seamless balance between high performance and lightweight handling. The engine features advanced electronics, including a Keihin EMS with a 42 mm throttle body, ensuring precise fuel injection and optimal power delivery across all RPM ranges. The 6-speed wide-ratio transmission, complemented by a DDS (Damped Diaphragm Steel) clutch, provides smooth and reliable shifting, catering to a variety of terrains and riding conditions.

The chassis is constructed from lightweight chromium-molybdenum steel, offering enhanced rigidity and stability. This is further supported by the WP XPLOR front forks and WP XACT rear shock, both fully adjustable to suit different rider preferences and terrain types. The ergonomics are designed for maximum comfort and control, featuring a slim profile, a low seat height, and high-grip seat cover, allowing for agile movement and confidence during rides. Braking is managed by advanced Brembo hydraulic systems, ensuring robust stopping power and high precision.

Additionally, the FE 350 comes equipped with an electric start system powered by a lightweight lithium-ion battery, enhancing convenience and reducing weight. The motorcycle also incorporates a multifunctional digital display, providing essential ride data at a glance. High-performance Dunlop Geomax tires are standard, ensuring superior grip and durability. With a fuel tank capacity of 2.25 gallons, the Husqvarna FE 350 2023 is built for extended rides, offering a perfect combination of cutting-edge technology, superior craftsmanship, and high-end performance, making it a top choice for serious enduro riders.

Husqvarna FE 350 2023 Motorcycle F.A.Q.

What is the recommended oil type and capacity for the Husqvarna FE 350 2023?

The recommended oil type for the Husqvarna FE 350 2023 is 10W-50 synthetic motor oil. The oil capacity is approximately 1.1 liters (1.16 US quarts).

How often should I replace the air filter on my Husqvarna FE 350 2023?

The air filter should be checked after every ride in dusty conditions and replaced if necessary. Under normal conditions, inspect it every 15 hours of operation.

What is the proper tire pressure for the Husqvarna FE 350 2023?

The recommended tire pressure for the Husqvarna FE 350 2023 is 12 psi (0.8 bar) for the front and rear tires for off-road use. Adjust pressure based on terrain and load.

How do I adjust the suspension on the Husqvarna FE 350 2023?

Adjust the suspension by turning the compression and rebound clickers on the front forks and rear shock absorber. Consult the owner’s manual for specific settings based on rider weight and terrain.

What maintenance should be performed after every 20 hours of riding on the Husqvarna FE 350 2023?

Every 20 hours, you should change the engine oil and oil filter, check the valve clearance, and inspect the brake pads and chain tension.

How can I troubleshoot starting issues with my Husqvarna FE 350 2023?

Check the battery charge, ensure the fuel is fresh, inspect the spark plug for wear or fouling, and verify that the kill switch is not engaged.

What is the correct way to clean the chain on the Husqvarna FE 350 2023?

Use a suitable chain cleaner and a soft brush to remove dirt and grime. After cleaning, apply a high-quality chain lubricant while rotating the rear wheel.

How do I reset the maintenance light on the Husqvarna FE 350 2023?

To reset the maintenance light, navigate to the settings menu on the dashboard, select the maintenance option, and follow the prompts to reset the interval.

What should I do if my Husqvarna FE 350 2023 overheats?

Stop the engine immediately and let it cool down. Check the coolant level and radiator for any blockages. If the problem persists, consult a professional mechanic.

How do I properly store the Husqvarna FE 350 2023 during the off-season?

Clean the motorcycle thoroughly, change the oil, top off the fuel tank with a stabilizer, disconnect the battery, and store it in a dry, covered area.