Contents

1 MEANS OF REPRESENTATION
- 1.1 Symbols used
- 1.2 Formats used
2 SAFETY ADVICE
- 2.1 Use definition - intended use
- 2.2 Safety advice
- 2.3 Degrees of risk and symbols
- 2.4 Tampering warning
- 2.5 Safe operation
- 2.6 Protective clothing
- 2.7 Work rules
- 2.8 Environment
- 2.9 Owner's Manual
3 IMPORTANT INFORMATION
- 3.1 Manufacturer and implied warranty
- 3.2 Operating and auxiliary substances
- 3.3 Spare parts, accessories
- 3.4 Service
- 3.5 Figures
- 3.6 Customer service
4 VIEW OF VEHICLE
- 4.1 View of vehicle, front left (example)
- 4.2 View of vehicle, rear right (example)
5 SERIAL NUMBERS
- 5.1 Chassis number
- 5.2 Type label (FE 350 EU, FE 350 AUS)
- 5.3 Key number (FE 350 EU, FE 350 AUS)
- 5.4 Engine number
- 5.5 Fork part number
- 5.6 Shock absorber part number
6 CONTROLS
- 6.1 Clutch lever
- 6.2 Hand brake lever
- 6.3 Throttle grip
- 6.4 Kill switch (FE 350 EU, FE 350 AUS)
- 6.5 Kill switch (FE 350 USA)
- 6.6 Horn button (FE 350 EU, FE 350 AUS)
- 6.7 Light switch (FE 350 EU, FE 350 AUS)
- 6.8 Light switch (FE 350 USA)
- 6.9 Turn signal switch (FE 350 EU, FE 350 AUS)
- 6.10 Emergency OFF switch (FE 350 AUS)
- 6.11 Electric starter button (FE 350 EU, FE 350 USA)
- 6.12 Electric starter button (FE 350 AUS)
- 6.13 Overview of indicator lamps (FE 350 EU, FE 350 AUS)
- 6.14 Overview of indicator lamps (FE 350 USA)
- 6.15 Opening filler cap
- 6.16 Closing filler cap
- 6.17 Idle speed adjusting screw
- 6.18 Shift lever
- 6.19 Foot brake lever
- 6.20 Side stand
- 6.21 Steering lock (FE 350 EU, FE 350 AUS)
- 6.22 Locking the steering (FE 350 EU, FE 350 AUS)
- 6.23 Unlocking the steering (FE 350 EU, FE 350 AUS)
7 SPEEDOMETER
- 7.1 Overview
- 7.2 Activation
- 7.3 Message on the speedometer
- 7.4 Setting the speedometer
- 7.5 Setting kilometers or miles
- 7.6 Setting the clock
- 7.7 Setting the service display
- 7.8 Speed, time, and DST distance 1
- 7.9 Speed, time, and DST2 distance 2
- 7.10 AVG average speed, ART operating hours, and ODO total distance covered
8 PREPARING FOR USE
- 8.1 Advice on first use
- 8.2 Running-in the engine
- 8.3 Preparing the vehicle for difficult riding conditions
- 8.4 Preparing for rides on dry sand
- 8.5 Preparing for rides on wet sand
- 8.6 Preparing for rides on wet and muddy surfaces
- 8.7 Preparing for rides at high temperature and slow speed
- 8.8 Preparing for rides at low temperature or in snow
9 RIDING INSTRUCTIONS
- 9.1 Checks and maintenance work when preparing for use
- 9.2 Starting
- 9.3 Starting off
- 9.4 Shifting, riding
- 9.5 Braking
- 9.6 Stopping, parking
- 9.7 Transport
- 9.8 Refueling
10 SERVICE SCHEDULE
- 10.1 Service schedule
- 10.2 Service work (as additional order)
11 TUNING THE CHASSIS
- 11.1 Checking the basic chassis setting with the rider's weight
- 11.2 Compression damping of shock absorber
- 11.3 Adjusting the low-speed compression damping of the shock absorber
- 11.4 Adjusting the high-speed compression damping of the shock absorber
- 11.5 Adjusting the rebound damping of the shock absorber
- 11.6 Measuring rear wheel sag unloaded
- 11.7 Checking the static sag of the shock absorber
- 11.8 Checking the riding sag of the shock absorber
- 11.9 Adjusting the spring preload of the shock absorber x
- 11.10 Adjusting the riding sag x
- 11.11 Checking basic setting of fork
- 11.12 Adjusting the compression damping of the fork
- 11.13 Adjusting the rebound damping of the fork
- 11.14 Handlebar position
- 11.15 Adjusting the handlebar position x
12 SERVICE WORK ON THE CHASSIS
- 12.1 Raising the motorcycle with a lift stand
- 12.2 Removing the motorcycle from the lift stand
- 12.3 Bleeding fork legs
- 12.4 Cleaning the dust boots of the fork legs
- 12.5 Loosening the fork protector
- 12.6 Positioning the fork protector
- 12.7 Removing the fork legs
- 12.8 Installing the fork legs x
- 12.9 Removing the fork protector x
- 12.10 Installing the fork protector x
- 12.11 Removing the lower triple clamp x
- 12.12 Installing the lower triple clamp x
- 12.13 Checking the steering head bearing play
- 12.14 Adjusting the play of the steering head bearing x
- 12.15 Lubricating the steering head bearing x
- 12.16 Removing the front fender
- 12.17 Installing the front fender
- 12.18 Removing the shock absorber x
- 12.19 Installing the shock absorber x
- 12.20 Removing the seat
- 12.21 Mounting the seat
- 12.22 Removing the air filter box lid
- 12.23 Installing the air filter box lid
- 12.24 Removing the air filter x
- 12.25 Installing the air filter x
- 12.26 Cleaning the air filter and air filter box x
- 12.27 Sealing the air filter box x
- 12.28 Removing the manifold x
- 12.29 Installing the manifold x
- 12.30 Removing the main silencer
- 12.31 Installing the main silencer
- 12.32 Changing the glass fiber yarn filling of the main silencer x
- 12.33 Removing the right side cover
- 12.34 Installing the right side cover
- 12.35 Removing the fuel tank x
- 12.36 Installing the fuel tank x
- 12.37 Checking for chain dirt accumulation
- 12.38 Cleaning the chain
- 12.39 Checking the chain tension
- 12.40 Adjusting the chain tension
- 12.41 Checking the chain, rear sprocket, engine sprocket and chain guide
- 12.42 Checking the frame x
- 12.43 Checking the swingarm x
- 12.44 Checking the routing of the throttle cable
- 12.45 Checking the rubber grip
- 12.46 Additionally securing the rubber grip
- 12.47 Adjusting the basic position of the clutch lever
- 12.48 Checking/rectifying the fluid level of the hydraulic clutch
- 12.49 Changing the hydraulic clutch fluid x
- 12.50 Removing the engine guard
- 12.51 Installing the engine guard
13 BRAKE SYSTEM
- 13.1 Checking free travel of hand brake lever
- 13.2 Adjusting free travel of hand brake lever (FE 350 EU, FE 350 AUS)
- 13.3 Adjusting the basic position of the hand brake lever (FE 350 USA)
- 13.4 Checking the brake discs
- 13.5 Checking the front brake fluid level
- 13.6 Adding front brake fluid x
- 13.7 Checking the front brake linings
- 13.8 Changing the front brake linings x
- 13.9 Checking the free travel of foot brake lever
- 13.10 Adjusting the basic position of the foot brake lever x
- 13.11 Checking the rear brake fluid level
- 13.12 Adding rear brake fluid x
- 13.13 Checking the rear brake linings
- 13.14 Changing the rear brake linings x
14 WHEELS, TIRES
- 14.1 Removing the front wheel x
- 14.2 Installing the front wheel x
- 14.3 Removing the rear wheel x
- 14.4 Installing the rear wheel x
- 14.5 Checking the tire condition
- 14.6 Checking the tire air pressure
- 14.7 Checking spoke tension
15 ELECTRICAL SYSTEM
- 15.1 Removing the battery x
- 15.2 Installing the battery x
- 15.3 Charging the battery x
- 15.4 Changing the main fuse
- 15.5 Changing the fuses of individual power consumers
- 15.6 Removing the headlight mask with the headlight
- 15.7 Installing the headlight mask with the headlight
- 15.8 Changing the headlight bulb
- 15.9 Changing the turn signal bulb (FE 350 EU, FE 350 AUS)
- 15.10 Checking the headlight setting
- 15.11 Adjusting the headlight range
- 15.12 Changing the speedometer battery
16 COOLING SYSTEM
- 16.1 Cooling system
- 16.2 Checking the antifreeze and coolant level
- 16.3 Checking the coolant level
- 16.4 Draining the coolant x
- 16.5 Refilling coolant x
17 TUNING THE ENGINE
- 17.1 Checking the play in the throttle cable
- 17.2 Adjusting the play in the throttle cable x
- 17.3 Adjusting the idle speed x
- 17.4 Checking the basic position of the shift lever
- 17.5 Adjusting the basic position of the shift lever x
18 SERVICE WORK ON THE ENGINE
- 18.1 Changing the fuel screen x
- 18.2 Checking the engine oil level
- 18.3 Changing the engine oil and oil filter, cleaning the oil screen x
- 18.4 Adding engine oil
19 CLEANING, CARE
- 19.1 Cleaning the motorcycle
- 19.2 Checks and maintenance steps for winter operation
20 STORAGE
- 20.1 Storage
- 20.2 Preparing for use after storage
21 TROUBLESHOOTING
22 BLINK CODE
23 TECHNICAL DATA
- 23.1 Engine
- 23.2 Engine tightening torques
- 23.3 Capacities
  - 23.3.1 Engine oil
  - 23.3.2 Coolant
  - 23.3.3 Fuel
- 23.4 Chassis
- 23.5 Electrical system
- 23.6 Tires
- 23.7 Fork
- 23.8 Shock absorber
- 23.9 Chassis tightening torques
24 SUBSTANCES
25 AUXILIARY SUBSTANCES
26 STANDARDS
INDEX
- A
- B
- C
- D
- E
- F
- H
- I
- K
- L
- M
- O
- P
- R
- S
- T
- U
- V
- W

Husqvarna FE 350 2014 Owner's Manual

Husqvarna FE 350 2014 Motorcycle manual cover

Pages 117

Year 2014

Language(s)

of 117

Husqvarna FE 350 2014 Motorcycle Specification

The Husqvarna FE 350 2014 is an advanced off-road motorcycle engineered for superior performance and reliability. This model features a robust 349.7cc, single-cylinder, 4-stroke engine that delivers a competitive blend of power and efficiency. The engine integrates a state-of-the-art Keihin fuel injection system and a 42mm throttle body, ensuring optimal combustion and throttle response. The bike is equipped with a six-speed transmission that offers a versatile range for various terrains, complemented by a DDS (Damped Diaphragm Steel) clutch for smooth and precise shifting.

The chassis of the FE 350 is constructed from high-strength chromium-molybdenum steel, providing excellent durability and handling characteristics. The suspension setup includes WP Performance Systems components, with a fully adjustable WP Xplor 48 fork at the front and a WP Xplor PDS shock absorber at the rear, offering exceptional traction and stability across diverse off-road conditions. Braking is managed by high-performance Brembo brakes, featuring a 260mm front disc and a 220mm rear disc, ensuring reliable stopping power.

With a ground clearance of 345mm and a seat height of 970mm, the FE 350 is designed to tackle rugged terrains with ease. The motorcycle's lightweight design, with a dry weight of approximately 109.5 kg, enhances its agility and maneuverability. The fuel tank has a capacity of 9.5 liters, providing ample range for extended trail rides.

The Husqvarna FE 350 2014 combines cutting-edge engineering with a user-friendly design, making it a top choice for both amateur and professional off-road enthusiasts. Its blend of power, agility, and advanced technology ensures an unparalleled riding experience in the dirt biking domain.

Husqvarna FE 350 2014 Motorcycle F.A.Q.

What is the recommended oil type for the Husqvarna FE 350 2014?

The recommended oil type is a high-quality synthetic oil, specifically 10W-50, which provides optimal performance and protection for the engine.

How often should I change the air filter on my Husqvarna FE 350 2014?

The air filter should be inspected and cleaned after every ride in dusty conditions, and generally replaced every 10-15 hours of riding to ensure optimal engine performance.

What is the correct chain tension for the Husqvarna FE 350 2014?

The correct chain tension allows for approximately 55mm to 58mm of slack when measured midway between the front and rear sprockets.

How do I troubleshoot starting issues with the Husqvarna FE 350 2014?

Check the battery charge, ensure the fuel is fresh, inspect the spark plug for wear or fouling, and verify that the fuel pump is functioning properly.

What is the recommended tire pressure for the Husqvarna FE 350 2014?

The recommended tire pressure for typical off-road use is 12 psi for both the front and rear tires. Adjust according to terrain and rider preference.

How do I adjust the suspension settings on the Husqvarna FE 350 2014?

Refer to the owner’s manual for baseline settings. Use the compression and rebound adjusters on the forks and shock to fine-tune according to your weight and riding style.

What should I do if the engine overheats on the Husqvarna FE 350 2014?

Stop the motorcycle, turn off the engine, and allow it to cool. Check coolant levels and ensure the radiator is not obstructed. Consider using a higher coolant concentration for extreme conditions.

How can I improve the fuel efficiency of my Husqvarna FE 350 2014?

Regular maintenance including proper air filter cleaning, spark plug replacement, and fuel injector cleaning can help improve fuel efficiency. Adjust riding habits to be more conservative.

What are the torque specifications for the wheel nuts on the Husqvarna FE 350 2014?

The recommended torque for the front wheel nuts is 25 Nm and for the rear wheel nuts is 45 Nm. Always use a torque wrench for accuracy.

How do I maintain the brake system on my Husqvarna FE 350 2014?

Regularly check brake fluid levels, inspect brake pads for wear, and ensure there are no leaks in the brake lines. Replace brake pads and fluid as needed to maintain optimal braking performance.