Husqvarna Automower 550 EPOS Operator's Manual

The Husqvarna Automower 550 EPOS uses a virtual boundary setup through the EPOS system. You will need to use the Automower Connect app to define the mowing area by walking the perimeter with your smartphone. Ensure the GPS signal is strong for accurate boundary mapping.
If the Automower 550 EPOS is not charging, check the charging station connections and ensure the power supply is plugged in. Inspect the charging contacts on both the mower and the station for any debris or corrosion and clean them if necessary.
To update the firmware, connect your Automower to the Automower Connect app. The app will notify you if a new update is available. Follow the on-screen instructions to download and install the update. Ensure the mower is sufficiently charged before beginning the update process.
Uncut patches may result from an uneven lawn surface, incorrect cutting height settings, or issues with the virtual boundary. Check the cutting height and adjust as necessary. Ensure the EPOS boundaries are set correctly and verify that the GPS signal is strong.
Turn off the mower and remove the battery before cleaning. Use a soft brush or cloth to remove grass clippings and debris from the wheels, body, and blades. Avoid using water directly on the mower to prevent damage to electronic components.
Regular maintenance includes checking and replacing blades every couple of months, cleaning the mower, and ensuring the charging station is clear of obstructions. Periodically check the software for updates and inspect the wheels and body for wear and tear.
Adjust the cutting height using the control panel on the mower or through the Automower Connect app. You can set the height between 20-60 mm (0.8-2.4 inches), depending on your preference and lawn conditions.
Ensure there are no obstructions like tall buildings or dense foliage that could block the GPS signal. Restart the mower and check for software updates that might improve GPS performance. As a last resort, contact Husqvarna support for assistance.
The Automower 550 EPOS is designed to work in wet conditions, but extremely heavy rain can affect performance. It’s recommended to monitor the mower in such conditions to ensure it operates correctly and to prevent it from getting stuck.
Ensure the blades are sharp and replace them regularly. Optimize the mowing schedule using the Automower Connect app to avoid over-mowing. Keep the mower and charging station clean and ensure the virtual boundaries are accurately set for optimal coverage.