Contents

1 MEANS OF REPRESENTATION
- 1.1 Symbols used
- 1.2 Formats used
2 SAFETY ADVICE
- 2.1 Use definition intended use
- 2.2 Misuse
- 2.3 Safety advice
- 2.4 Degrees of risk and symbols
- 2.5 Overview of labels
- 2.6 Reporting safety defects
- 2.7 Noise emission warranty
- 2.8 Operating noise warning
- 2.9 Consumer rights
- 2.10 Tampering warning
- 2.11 Safe operation
- 2.12 Protective clothing
- 2.13 Work rules
- 2.14 Environment
- 2.15 Owner's Manual
3 IMPORTANT NOTES
- 3.1 Manufacturer and implied warranty
- 3.2 Operating and auxiliary substances
- 3.3 Spare parts, accessories
- 3.4 Service
- 3.5 Figures
- 3.6 Customer service
4 VIEW OF VEHICLE
- 4.1 View of vehicle, front left (example)
- 4.2 View of vehicle, rear right (example)
5 SERIAL NUMBERS
- 5.1 Chassis number
- 5.2 Type label
- 5.3 Key number
- 5.4 Engine number
- 5.5 Fork part number
- 5.6 Shock absorber article number
6 CONTROLS
- 6.1 Clutch lever
- 6.2 Hand brake lever
- 6.3 Throttle grip
- 6.4 Horn button
- 6.5 Light switch
- 6.6 Turn signal switch
- 6.7 Emergency OFF switch
- 6.8 Electric starter button
- 6.9 Ignition/steering lock
- 6.10 Indicator lamps overview
- 6.11 Opening the filler cap
- 6.12 Closing filler cap
- 6.13 Seat unlocking
- 6.14 Handrails
- 6.15 Passenger footrest
- 6.16 Shift lever
- 6.17 Foot brake lever
- 6.18 Side stand
7 COMBINATION INSTRUMENT
- 7.1 Overview
- 7.2 Activation
- 7.3 Messages on the combination instrument
- 7.4 Adjusting the combination instrument
- 7.5 Setting the kilometers or miles
- 7.6 Setting the clock
- 7.7 Setting the service display
- 7.8 Speed, time, and DST distance 1
- 7.9 Speed, time, and DST2 distance 2
- 7.10 AVG average speed, ART operating hours, and ODO total distance covered
8 PREPARING FOR USE
- 8.1 Advice on preparing for first use
- 8.2 Running in the engine
- 8.3 Loading the vehicle
9 RIDING INSTRUCTIONS
- 9.1 Checks and maintenance measures when preparing for use
- 9.2 Starting the vehicle
- 9.3 Starting off
- 9.4 Shifting, riding
- 9.5 Applying the brakes
- 9.6 Stopping, parking
- 9.7 Transport
- 9.8 Refueling
10 SERVICE SCHEDULE
- 10.1 Additional information
- 10.2 Required work
- 10.3 Recommended work
11 TUNING THE CHASSIS
- 11.1 Fork/shock absorber
- 11.2 Adjusting the compression damping of the fork
- 11.3 Adjusting the rebound damping of the fork
- 11.4 Compression damping of the shock absorber
- 11.5 Adjusting the low-speed compression damping of the shock absorber
- 11.6 Adjusting the high-speed compression damping of the shock absorber
- 11.7 Adjusting the rebound damping of the shock absorber
- 11.8 Measuring the unloaded rear wheel sag
- 11.9 Checking the static sag of the shock absorber
- 11.10 Checking the riding sag of the shock absorber
- 11.11 Adjusting the spring preload of the shock absorber
- 11.12 Adjusting the riding sag
- 11.13 Handlebar position
- 11.14 Adjusting the handlebar position
12 SERVICE WORK ON THE CHASSIS
- 12.1 Raising the motorcycle with a lift stand
- 12.2 Removing the motorcycle from the lift stand
- 12.3 Bleeding the fork legs
- 12.4 Cleaning the dust boots of the fork legs
- 12.5 Removing the fork protector
- 12.6 Installing the fork protector
- 12.7 Checking the play of the steering head bearing
- 12.8 Adjusting the steering head bearing play
- 12.9 Removing the seat
- 12.10 Mounting the seat
- 12.11 Removing the tool set
- 12.12 Storing tool set
- 12.13 Take off the side cover
- 12.14 Mounting the side cover
- 12.15 Removing front fender
- 12.16 Installing front fender
- 12.17 Removing the air filter
- 12.18 Installing the air filter
- 12.19 Checking the chain for dirt
- 12.20 Cleaning the chain
- 12.21 Checking the chain tension
- 12.22 Adjusting the chain tension
- 12.23 Checking the chain, rear sprocket, engine sprocket, and chain guide
- 12.24 Adjusting the chain guide
- 12.25 Adjusting the basic position of the clutch lever
- 12.26 Checking/correcting the fluid level of the hydraulic clutch
- 12.27 Removing the engine guard
- 12.28 Installing the engine guard
13 BRAKE SYSTEM
- 13.1 Antilock brake system (ABS)
- 13.2 Adjusting the basic position of the hand brake lever
- 13.3 Checking the brake discs
- 13.4 Checking brake fluid level of front brake
- 13.5 Adding front brake fluid
- 13.6 Checking the front brake linings
- 13.7 Changing the front brake linings
- 13.8 Checking the free travel of foot brake lever
- 13.9 Adjusting the basic position of the foot brake lever
- 13.10 Checking the rear brake fluid level
- 13.11 Adding rear brake fluid
- 13.12 Checking the rear brake linings
- 13.13 Changing the rear brake linings
14 WHEELS, TIRES
- 14.1 Removing the front wheel
- 14.2 Installing the front wheel
- 14.3 Removing the rear wheel
- 14.4 Installing the rear wheel
- 14.5 Checking the rear hub rubber dampers
- 14.6 Checking the tire condition
- 14.7 Checking the tire air pressure
- 14.8 Checking spoke tension
15 ELECTRICAL SYSTEM
- 15.1 Removing the battery
- 15.2 Installing the battery
- 15.3 Recharging the battery
- 15.4 Changing the main fuse
- 15.5 Changing the ABS fuses
- 15.6 Changing the fuses of individual power consumers
- 15.7 Removing the headlight mask with the headlight
- 15.8 Installing the headlight mask with the headlight
- 15.9 Changing the headlight bulb
- 15.10 Changing the parking light bulb
- 15.11 Checking the headlight setting
- 15.12 Adjusting the headlight range
- 15.13 Changing the turn signal bulb
- 15.14 Diagnostics connector
16 COOLING SYSTEM
- 16.1 Cooling system
- 16.2 Checking the antifreeze and coolant level
- 16.3 Checking the coolant level
- 16.4 Draining the coolant
- 16.5 Filling/bleeding the cooling system
- 16.6 Changing the coolant
17 TUNING THE ENGINE
- 17.1 Checking the basic position of the shift lever
- 17.2 Adjusting the basic position of the shift lever
18 SERVICE WORK ON THE ENGINE
- 18.1 Changing the fuel screen
- 18.2 Checking the engine oil level
- 18.3 Changing the engine oil and oil filter, cleaning the oil screens
- 18.4 Adding engine oil
19 CLEANING, CARE
- 19.1 Cleaning the motorcycle
- 19.2 Checks and maintenance steps for winter operation
20 STORAGE
- 20.1 Storage
- 20.2 Preparing for use after storage
21 TROUBLESHOOTING
22 TECHNICAL DATA
- 22.1 Engine
- 22.2 Engine tightening torques
- 22.3 Capacities
  - 22.3.1 Engine oil
  - 22.3.2 Coolant
  - 22.3.3 Fuel
- 22.4 Chassis
- 22.5 Electrical system
- 22.6 Tires
- 22.7 Fork
- 22.8 Shock absorber
- 22.9 Chassis tightening torques
23 SUBSTANCES
24 AUXILIARY SUBSTANCES
25 STANDARDS
26 INDEX OF SPECIAL TERMS
27 LIST OF ABBREVIATIONS
28 LIST OF SYMBOLS
- 28.1 Red symbols
- 28.2 Yellow and orange symbols
- 28.3 Green and blue symbols
INDEX
- A
- B
- C
- D
- E
- F
- H
- I
- K
- L
- M
- O
- P
- R
- S
- T
- U
- V
- W

Husqvarna 701 Enduro 2018 Owner's Manual

Husqvarna 701 Enduro 2018 Motorcycle manual cover

Pages 286

Year 2018

Language(s)

of 286

Husqvarna 701 Enduro 2018 Motorcycle Specification

The Husqvarna 701 Enduro 2018 is a high-performance, dual-sport motorcycle designed for both off-road and on-road use. Powered by a 692.7cc, liquid-cooled, single-cylinder, four-stroke engine, it delivers an impressive 74 horsepower at 8,000 RPM and 52.4 lb-ft of torque at 6,750 RPM, ensuring robust performance across various terrains. This engine is paired with a six-speed gearbox that provides smooth and precise shifting, enhancing the riding experience.

The motorcycle features a lightweight chromium-molybdenum trellis frame, which offers exceptional stability and handling. The suspension system comprises fully adjustable WP suspension components, including a WP XPLOR 48 front fork and a WP DCC rear shock, ensuring superior comfort and control on uneven surfaces. The 701 Enduro comes equipped with Brembo hydraulic disc brakes, featuring a 300mm front disc and a 240mm rear disc, providing reliable stopping power.

The bike rides on 21-inch front and 18-inch rear wheels, fitted with Continental TKC80 dual-sport tires that offer excellent traction in diverse conditions. The fuel tank has a capacity of 13 liters, providing ample range for extended rides. The seat height is set at 910mm, making it accessible for a wide range of riders while still offering the clearance needed for off-road adventures.

The Husqvarna 701 Enduro 2018 also features advanced electronics, including a ride-by-wire throttle system and switchable ABS, which can be turned off for off-road riding. The multifunctional digital display provides essential information at a glance. With a dry weight of just 145kg, the 701 Enduro combines agility with power, making it an ideal choice for enthusiasts seeking versatility and performance in a single package.

Husqvarna 701 Enduro 2018 Motorcycle F.A.Q.

How do I perform basic maintenance on the Husqvarna 701 Enduro 2018?

Basic maintenance includes regular oil changes, checking and replacing the air filter, inspecting the brakes, and ensuring the chain is lubricated and tensioned correctly. Refer to the user manual for specific intervals and procedures.

What should I do if the engine of my Husqvarna 701 Enduro 2018 won't start?

Check the battery connections and charge if necessary. Ensure the fuel supply is adequate and the kill switch is in the correct position. If the problem persists, inspect the spark plug and ignition system.

How can I adjust the suspension settings on my Husqvarna 701 Enduro 2018?

The suspension settings can be adjusted using the clickers on the forks and shock. Consult the user manual for recommended settings based on your riding conditions and weight.

What type of oil is recommended for the Husqvarna 701 Enduro 2018?

Use fully synthetic 10W-50 or 10W-60 motorcycle oil that meets the specifications outlined in the owner's manual.

How do I troubleshoot electrical issues on the Husqvarna 701 Enduro 2018?

Start by checking the fuses and battery voltage. Inspect the wiring for any signs of damage or corrosion. Use a multimeter to test continuity and pinpoint faulty components.

What is the recommended tire pressure for the Husqvarna 701 Enduro 2018?

The recommended tire pressure is typically 22 psi for the front tire and 25 psi for the rear tire. Adjust based on load and riding conditions.

How can I improve the fuel efficiency of my Husqvarna 701 Enduro 2018?

Maintain proper tire pressure, keep the chain lubricated and tensioned, use the correct oil, and avoid aggressive riding to improve fuel efficiency.

How often should the air filter be replaced on the Husqvarna 701 Enduro 2018?

The air filter should be inspected every 3,000 miles and replaced if necessary. Replace it more frequently if riding in dusty conditions.

What are the signs of worn brake pads on the Husqvarna 701 Enduro 2018?

Signs include squeaking or grinding noises, reduced braking efficiency, and the brake lever or pedal feeling spongy. Inspect brake pads visually for wear.

How do I adjust the clutch lever on the Husqvarna 701 Enduro 2018?

To adjust the clutch lever, locate the adjuster screw on the lever. Turn it to achieve the desired lever free play, typically about 10-15mm at the lever tip.