Contents

1 MEANS OF REPRESENTATION
- 1.1 Symbols used
- 1.2 Formats used
2 SAFETY ADVICE
- 2.1 Use definition intended use
- 2.2 Misuse
- 2.3 Safety advice
- 2.4 Degrees of risk and symbols
- 2.5 Overview of labels
- 2.6 Reporting safety defects
- 2.7 Noise emission warranty
- 2.8 Operating noise warning
- 2.9 Consumer rights
- 2.10 Tampering warning
- 2.11 Safe operation
- 2.12 Protective clothing
- 2.13 Work rules
- 2.14 Environment
- 2.15 Owner's Manual
3 IMPORTANT NOTES
- 3.1 Manufacturer and implied warranty
- 3.2 Operating and auxiliary substances
- 3.3 Spare parts, accessories
- 3.4 Service
- 3.5 Figures
- 3.6 Customer service
4 VIEW OF VEHICLE
- 4.1 View of vehicle, front left (example)
- 4.2 View of vehicle, rear right (example)
5 SERIAL NUMBERS
- 5.1 Chassis number
- 5.2 Type label
- 5.3 Key number
- 5.4 Engine number
- 5.5 Fork part number
- 5.6 Shock absorber article number
6 CONTROLS
- 6.1 Clutch lever
- 6.2 Hand brake lever
- 6.3 Throttle grip
- 6.4 Horn button
- 6.5 Light switch
- 6.6 Turn signal switch
- 6.7 Emergency OFF switch
- 6.8 Electric starter button
- 6.9 Ignition/steering lock
- 6.10 Indicator lamps overview
- 6.11 Opening the filler cap
- 6.12 Closing filler cap
- 6.13 Seat unlocking
- 6.14 Grab handles
- 6.15 Passenger footrest
- 6.16 Shift lever
- 6.17 Foot brake lever
- 6.18 Side stand
7 SPEEDOMETER
- 7.1 Overview
- 7.2 Activation
- 7.3 Messages on the speedometer
- 7.4 Setting the speedometer
- 7.5 Setting kilometers or miles
- 7.6 Setting the clock
- 7.7 Setting the service display
- 7.8 Speed, time, and DST distance 1
- 7.9 Speed, time, and DST2 distance 2
- 7.10 AVG average speed, ART operating hours, and ODO total distance covered
8 PREPARING FOR USE
- 8.1 Advice on first use
- 8.2 Running in the engine
- 8.3 Loading the vehicle
9 RIDING INSTRUCTIONS
- 9.1 Performing checks and vehicle care when preparing for use
- 9.2 Starting
- 9.3 Starting off
- 9.4 Shifting, riding
- 9.5 Applying the brakes
- 9.6 Stopping, parking
- 9.7 Transport
- 9.8 Refueling
10 SERVICE SCHEDULE
- 10.1 Additional information
- 10.2 Required work
- 10.3 Recommended work
11 TUNING THE CHASSIS
- 11.1 Fork/shock absorber
- 11.2 Adjusting the compression damping of the fork
- 11.3 Adjusting the rebound damping of the fork
- 11.4 Compression damping of the shock absorber
- 11.5 Adjusting the low-speed compression damping of the shock absorber
- 11.6 Adjusting the high-speed compression damping of the shock absorber
- 11.7 Adjusting the rebound damping of the shock absorber
- 11.8 Measuring the unloaded rear wheel sag
- 11.9 Checking the static sag of the shock absorber
- 11.10 Checking the riding sag of the shock absorber
- 11.11 Adjusting the spring preload of the shock absorber
- 11.12 Adjusting the riding sag
- 11.13 Handlebar position
- 11.14 Adjusting the handlebar position
12 SERVICE WORK ON THE CHASSIS
- 12.1 Raising the motorcycle with a lift stand
- 12.2 Removing the motorcycle from the lift stand
- 12.3 Bleeding the fork legs
- 12.4 Cleaning the dust boots of the fork legs
- 12.5 Removing the fork protector
- 12.6 Installing the fork protector
- 12.7 Checking the play of the steering head bearing
- 12.8 Adjusting the steering head bearing play
- 12.9 Removing the seat
- 12.10 Mounting the seat
- 12.11 Take off the side cover
- 12.12 Mounting the side cover
- 12.13 Removing the front fender
- 12.14 Installing the front fender
- 12.15 Removing the air filter
- 12.16 Installing the air filter
- 12.17 Checking the chain for dirt
- 12.18 Cleaning the chain
- 12.19 Checking the chain tension
- 12.20 Adjusting the chain tension
- 12.21 Checking the chain, rear sprocket, engine sprocket, and chain guide
- 12.22 Adjusting the chain guide
- 12.23 Adjusting basic position of clutch lever
- 12.24 Checking/correcting the fluid level of the hydraulic clutch
- 12.25 Removing the engine guard
- 12.26 Installing the engine guard
13 BRAKE SYSTEM
- 13.1 Antilock braking system (ABS)
- 13.2 Adjusting the basic position of the hand brake lever
- 13.3 Checking the brake discs
- 13.4 Checking brake fluid level of front brake
- 13.5 Adding front brake fluid
- 13.6 Checking the front brake linings
- 13.7 Changing the front brake linings
- 13.8 Checking the free travel of foot brake lever
- 13.9 Adjusting the basic position of the foot brake lever
- 13.10 Checking the rear brake fluid level
- 13.11 Adding rear brake fluid
- 13.12 Checking the rear brake linings
- 13.13 Changing the rear brake linings
14 WHEELS, TIRES
- 14.1 Removing the front wheel
- 14.2 Installing the front wheel
- 14.3 Removing the rear wheel
- 14.4 Installing the rear wheel
- 14.5 Checking the rear hub rubber dampers
- 14.6 Checking the tire condition
- 14.7 Checking the tire air pressure
- 14.8 Checking spoke tension
15 ELECTRICAL SYSTEM
- 15.1 Removing the battery
- 15.2 Installing the battery
- 15.3 Recharging the battery
- 15.4 Changing the main fuse
- 15.5 Changing the ABS fuses
- 15.6 Changing the fuses of individual power consumers
- 15.7 Removing the headlight mask with the headlight
- 15.8 Installing the headlight mask with the headlight
- 15.9 Changing the headlight bulb
- 15.10 Changing the parking light bulb
- 15.11 Checking the headlight setting
- 15.12 Adjusting the headlight range
- 15.13 Changing the turn signal bulb
16 COOLING SYSTEM
- 16.1 Cooling system
- 16.2 Checking the antifreeze and coolant level
- 16.3 Checking the coolant level
- 16.4 Draining the coolant
- 16.5 Filling/bleeding the cooling system
17 TUNING THE ENGINE
- 17.1 Checking the basic position of the shift lever
- 17.2 Adjusting the basic position of the shift lever
18 SERVICE WORK ON THE ENGINE
- 18.1 Changing the fuel screen
- 18.2 Checking the engine oil level
- 18.3 Changing the engine oil and oil filter, cleaning the oil screens
- 18.4 Adding engine oil
19 CLEANING, CARE
- 19.1 Cleaning the motorcycle
- 19.2 Checks and maintenance steps for winter operation
20 STORAGE
- 20.1 Storage
- 20.2 Preparing for use after storage
21 TROUBLESHOOTING
22 TECHNICAL DATA
- 22.1 Engine
- 22.2 Engine tightening torques
- 22.3 Capacities
  - 22.3.1 Engine oil
  - 22.3.2 Coolant
  - 22.3.3 Fuel
- 22.4 Chassis
- 22.5 Electrical system
- 22.6 Tires
- 22.7 Fork
- 22.8 Shock absorber
- 22.9 Chassis tightening torques
23 SUBSTANCES
24 AUXILIARY SUBSTANCES
25 STANDARDS
26 INDEX OF SPECIAL TERMS
27 LIST OF ABBREVIATIONS
28 LIST OF SYMBOLS
- 28.1 Red symbols
- 28.2 Yellow and orange symbols
- 28.3 Green and blue symbols
INDEX
- A
- B
- C
- E
- F
- G
- H
- I
- K
- L
- M
- O
- P
- R
- S
- T
- U
- V
- W

Husqvarna 701 Enduro 2017 Owner's Manual

Husqvarna 701 Enduro 2017 Motorcycle manual cover

Pages 226

Year 2017

Language(s)

of 226

Husqvarna 701 Enduro 2017 Motorcycle Specification

The Husqvarna 701 Enduro 2017 is a high-performance dual-sport motorcycle designed for both off-road terrain and on-road travel. It is equipped with a powerful 692.7cc single-cylinder, 4-stroke engine that delivers an impressive 74 horsepower at 8,000 rpm and 71 Nm of torque at 6,750 rpm. The engine features advanced electronic fuel injection and a ride-by-wire system for precise throttle response and optimal fuel efficiency.

The motorcycle’s lightweight chrome-molybdenum steel trellis frame offers exceptional handling and stability, while the WP Suspension system, consisting of a fully adjustable 48mm front fork and a rear mono-shock, ensures superior comfort and performance on varied terrains. The bike has a ground clearance of 280mm, making it capable of tackling rough off-road conditions with ease. The braking system includes Brembo brakes with a 300mm front disc and a 240mm rear disc, providing reliable stopping power.

The Husqvarna 701 Enduro 2017 also features a sophisticated LCD dashboard that provides essential information such as speed, RPM, gear position, and fuel level. The bike’s ergonomics are designed for rider comfort and control, with a seat height of 910mm and a dry weight of 145kg. Additionally, the 701 Enduro comes with a 13-liter fuel tank, offering a substantial range for long-distance rides.

In terms of aesthetics, the motorcycle boasts a sleek, aggressive design with a distinctive blue and white color scheme that reflects Husqvarna’s heritage. The high-quality components and robust build ensure durability and reliability, making the Husqvarna 701 Enduro 2017 a top choice for adventure riders seeking versatility and performance.

Husqvarna 701 Enduro 2017 Motorcycle F.A.Q.

How do I properly break in my Husqvarna 701 Enduro 2017 motorcycle?

To properly break in your Husqvarna 701 Enduro 2017, ride gently without applying full throttle during the first 600 miles (approximately 1,000 km). Avoid prolonged periods of constant RPMs. After this period, perform the initial service including an oil change and check all bolts and fasteners.

What is the recommended oil type and capacity for the Husqvarna 701 Enduro 2017?

The recommended oil for the Husqvarna 701 Enduro 2017 is a high-quality 10W-50 fully synthetic oil. The oil capacity is approximately 1.7 liters (1.8 quarts) including the oil filter.

How can I troubleshoot starting issues with my Husqvarna 701 Enduro 2017?

If your Husqvarna 701 Enduro 2017 is experiencing starting issues, check the battery charge and connections first. Ensure the kill switch is in the 'run' position. Inspect the spark plug for fouling or wear, and confirm that fuel is reaching the engine.

What is the maintenance schedule for the Husqvarna 701 Enduro 2017?

The maintenance schedule for the Husqvarna 701 Enduro 2017 includes an initial service at 600 miles (1,000 km), then every 6,200 miles (10,000 km) or 12 months. Regular checks include oil and filter changes, valve clearance inspection, and chain adjustment.

How do I adjust the suspension on the Husqvarna 701 Enduro 2017?

To adjust the suspension on the Husqvarna 701 Enduro 2017, use the adjustment knobs located on the forks and shock absorber. Refer to the owner's manual for specific settings based on your riding style and weight. Adjust preload, compression, and rebound to suit your needs.

What are common electrical issues in Husqvarna 701 Enduro 2017 and how to fix them?

Common electrical issues in the Husqvarna 701 Enduro 2017 include battery failure and loose connections. To fix these issues, regularly check the battery voltage, ensure terminals are tight, and inspect wiring for any signs of damage or corrosion.

How do I replace the air filter on my Husqvarna 701 Enduro 2017?

To replace the air filter on your Husqvarna 701 Enduro 2017, remove the seat and unfasten the airbox cover. Take out the old filter and insert a new one, ensuring it's properly seated. Reattach the cover and seat securely.

What tire pressures are recommended for the Husqvarna 701 Enduro 2017?

The recommended tire pressure for the Husqvarna 701 Enduro 2017 is 26 psi (1.8 bar) for the front tire and 29 psi (2.0 bar) for the rear tire for standard road conditions. Adjust pressures for off-road conditions as necessary.

How can I improve the fuel efficiency of my Husqvarna 701 Enduro 2017?

To improve fuel efficiency on your Husqvarna 701 Enduro 2017, maintain proper tire pressure, ensure regular servicing, use high-quality fuel, and avoid rapid acceleration. Riding at a consistent speed can also help in optimizing fuel consumption.

What should I do if my Husqvarna 701 Enduro 2017 overheats?

If your Husqvarna 701 Enduro 2017 overheats, stop riding immediately and allow the engine to cool. Check coolant levels and radiator for obstructions. If the problem persists, have a qualified mechanic inspect the cooling system for any leaks or faults.