Husqvarna 525iLST Operator's Manual
![Husqvarna 525iLST Trimmer manual cover](/images/nJfCdVouvCwyOovGxPRCigzW/thumbs/thumb175x175.webp)
To start the Husqvarna 525iLST Trimmer, ensure the battery is fully charged and properly attached. Press the power button to turn on the trimmer, then squeeze the trigger lever to begin trimming.
To maintain the battery, store it in a cool, dry place and avoid exposing it to extreme temperatures. Charge the battery fully before storing it for long periods and avoid completely discharging it regularly.
Check if the battery is properly charged and securely attached. Inspect the connections for any dirt or damage. If the problem persists, consider contacting Husqvarna customer support for further assistance.
The Husqvarna 525iLST Trimmer is designed to use a 2.4 mm (0.095 inch) trimmer line. Always use the recommended line size to ensure optimal performance and to prevent damage to the trimmer.
To replace the trimmer line, remove the trimmer head cover, take out any remaining line, and then insert a new line following the directional arrows. Wind the line evenly and securely, then reattach the cover.
Excessive vibration may be caused by an imbalanced trimmer head or damaged trimmer line. Check the trimmer head for debris or damage and ensure the line is evenly loaded. Replace any damaged parts as needed.
Always wear protective gear, including safety glasses, gloves, and ear protection. Make sure the area is clear of bystanders, especially children and pets. Follow all safety instructions in the user manual.
After use, remove any grass and debris from the trimmer head and body using a damp cloth. Avoid using harsh chemicals or water directly on the motor or battery. Regular cleaning will extend the life of your trimmer.
It is not recommended to use the Husqvarna 525iLST Trimmer in wet conditions, as moisture can damage the battery and electrical components. Wait for dry weather to ensure safe and effective operation.
If the trimmer line keeps breaking, check for any sharp objects or edges that might be cutting the line. Ensure you are using the correct line size and type. Inspect the trimmer head for damage or wear and replace as necessary.