Husqvarna 130C Operator's Manual
![Husqvarna 130C Trimmer manual cover](/images/pZCSPaKrVjXTrAHBsHvbYgQq/thumbs/thumb175x175.webp)
To start the Husqvarna 130C Trimmer, place it on a flat surface. Push the primer bulb 6 times, set the choke to the closed position, pull the starter handle until the engine fires, then set the choke to the open position and pull again to start.
The recommended fuel mixture for the Husqvarna 130C Trimmer is 50:1, which means 2.6 ounces of two-stroke oil per gallon of unleaded gasoline.
Replace the trimmer line as needed when it becomes brittle or too short for effective trimming. Regular inspection of the line before use will help determine when replacement is necessary.
The Husqvarna 130C Trimmer is compatible with 0.080-inch or 0.095-inch trimmer line. Choose based on the cutting conditions and manufacturer's recommendations.
If the trimmer won't start, check the fuel mixture, ensure the spark plug is clean and properly connected, inspect the air filter for clogs, and confirm that the primer bulb is functioning correctly.
To clean the air filter, remove it from the trimmer, wash it in warm soapy water, rinse thoroughly, and allow it to dry completely before reinstalling. Replace if it's damaged or excessively dirty.
Regular maintenance includes checking and replacing the air filter, inspecting the fuel system, cleaning the spark plug, lubricating moving parts, and inspecting the trimmer line and head.
Yes, the Husqvarna 130C Trimmer can be used for edging by tilting the trimmer head to a vertical position and guiding it along the edge of the lawn or pathway.
Excessive vibration can be caused by an unbalanced trimmer head or damaged line. Check that the line is evenly distributed and inspect the trimmer head for damage or wear.
For off-season storage, drain the fuel tank, clean the trimmer thoroughly, check for any damaged parts, and store it in a dry, cool place. Consider using a protective cover to prevent dust accumulation.