Horizon Fitness B701 2009 User's Guide
![Horizon Fitness B701 2009 Upright Bike manual cover](/images/GvJgAwgMMaKpbYTQxStTzSIq/thumbs/thumb175x175.webp)
To adjust the seat height, locate the seat adjustment lever beneath the seat. Loosen the lever, slide the seat up or down to the desired height, and tighten the lever to secure the seat in place.
First, check the power connection to ensure the bike is properly plugged in. If it is, inspect the power cord for any visible damage. If the issue persists, try replacing the batteries in the console or contact Horizon Fitness customer support for further assistance.
Perform a basic maintenance check by ensuring that all bolts and screws are properly tightened, checking the condition of the pedals and straps, and wiping down the bike with a damp cloth to remove dust and sweat. Regularly lubricate the moving parts as recommended in the user manual.
Use a silicone-based lubricant for the moving parts of the Horizon Fitness B701 2009 Upright Bike. Avoid using oil-based products as they can attract dust and cause buildup.
To reset the console, press and hold the reset button for a few seconds until the display clears. If your model does not have a reset button, try removing and reinserting the console batteries to reset it.
A squeaking noise during pedaling may indicate that the bike needs lubrication. Apply a silicone-based lubricant to the moving parts and check that all bolts and screws are tightened. If the noise persists, inspect the belt and pulleys for wear or damage.
Increase the resistance by turning the resistance knob located near the handlebars. Turn the knob clockwise to increase the resistance and counterclockwise to decrease it. Adjust the resistance level according to your workout preference.
Wipe down the bike after each use with a damp cloth to remove sweat and dust. Avoid using harsh chemicals. Periodically clean the console with a soft, dry cloth. Regular maintenance includes checking and tightening bolts and applying lubricant to moving parts.
Ensure that your hands are clean and dry when using the heart rate monitor. Check the sensor area on the handlebars for cleanliness. If the problem persists, inspect the wiring connections and replace the batteries if needed.
To transport the bike, first make sure it is unplugged. Use the built-in transport wheels by tilting the bike forward onto the wheels and carefully rolling it to the desired location. Make sure to lift with your legs to avoid injury.