Honda Ridgeline 2013 Technology Reference Guide

To connect your phone via Bluetooth, first ensure your phone's Bluetooth is on. Then, press the "Phone" button on the Ridgeline's audio system. Follow the prompts to search for devices and select your phone from the list. Enter any required passcodes to complete the pairing.
If the navigation system is unresponsive, try restarting the unit by turning off the vehicle and opening the driver's door to cut power. If the issue persists, check for any available software updates or consult your Honda dealer.
To update the infotainment system's software, visit the Honda website to check for updates specific to your model. Download any available updates to a USB drive and follow the instructions provided to install them into your vehicle's system.
Check the camera lens for dirt or moisture, and clean it gently with a microfiber cloth. If the issue persists, inspect the camera for damage or consult a professional technician for further diagnosis.
The "Check Fuel Cap" message indicates that the fuel cap may not be properly secured. Remove the cap and ensure it is tightened until it clicks. If the message does not clear, inspect the cap for damage or consider replacing it.
After checking and adjusting the tire pressures, turn the ignition to the "ON" position without starting the engine. Press and hold the TPMS button until the TPMS light blinks twice. This indicates the system has been reset.
If the air conditioning isn’t cold, check if the AC is turned on and set to the correct temperature. Inspect the refrigerant level; low refrigerant can cause poor cooling. If necessary, have the system inspected by a certified technician.
Regular maintenance for the 2013 Honda Ridgeline includes oil changes every 7,500 miles, tire rotations every 7,500 miles, and inspections of the brakes and suspension components. Refer to the owner's manual for a detailed schedule and specific intervals.
Locate the fuse box, which is under the dashboard or in the engine compartment. Use the diagram on the fuse box cover to find the specific fuse. Use a fuse puller to remove the blown fuse and replace it with one of the same amperage.
If the check engine light illuminates, ensure the gas cap is securely tightened. If the light persists, use an OBD-II scanner to retrieve trouble codes. Depending on the code, you may need to consult a mechanic for further diagnostics and repairs.