Honda CR-Z 2015 Technology Reference Guide
![Honda CR-Z 2015 Technology manual cover](/images/8f030a021a4c58c43efa418e/thumbs/thumb175x175.webp)
To connect your smartphone, ensure Bluetooth is enabled on your device. Press the 'Phone' button on the CR-Z's audio system, then select 'Add Bluetooth Device'. Follow the prompts on the screen and verify the passcode on your phone to complete the pairing process.
To reset the maintenance light, turn the ignition to the 'ON' position without starting the engine. Press the 'Select/Reset' button until the oil life indicator is displayed. Hold the button until the oil life blinks, then release and hold again until it resets to 100%.
To improve fuel efficiency, regularly check tire pressure, use the 'Econ' mode for better fuel management, avoid aggressive driving, and ensure timely maintenance like oil changes and air filter replacements.
First, try restarting the system by turning off the car and restarting it. If the problem persists, check the navigation system fuse. Consult the owner's manual for fuse box location and replace the fuse if necessary. If the issue continues, seek professional service.
To replace the key fob battery, use a small flathead screwdriver to pry apart the key fob at the seam. Remove the old battery and insert a new CR2032 battery, ensuring the positive side faces up. Snap the key fob halves back together.
Honda recommends using 0W-20 full synthetic motor oil for the 2015 CR-Z for optimal performance and efficiency. Always check your owner’s manual for the most accurate information.
To change a flat tire, ensure the car is on a flat surface and apply the parking brake. Use a jack to lift the vehicle and remove the lug nuts with a wrench. Replace the flat tire with the spare, tighten the lug nuts, and lower the vehicle. Refer to the owner's manual for detailed instructions.
Check the battery connections first. Ensure they are clean and tight. If the battery is dead, jump-start the vehicle. If the car still won't start, inspect the starter and ignition system or consult a professional mechanic.
Open the glove box and detach the dampener cord. Press inwards on the sides of the glove box to release it. Remove the filter cover behind the glove box and take out the old filter. Insert a new cabin air filter, ensuring it is oriented correctly, and reassemble.
The recommended tire pressure for the 2015 Honda CR-Z is typically 32 psi for both front and rear tires. Always refer to the sticker inside the driver's side door jamb for the most accurate information.