Honda Ridgeline 2012 Technology Reference Guide
![Honda Ridgeline 2012 Technology manual cover](/images/b5856a9d7c31f6d691096fcf/thumbs/thumb175x175.webp)
To pair your phone, turn on the vehicle and enable Bluetooth on your phone. Navigate to the Bluetooth settings on the vehicle's audio system, select "Add Bluetooth Device," and follow the prompts to complete pairing.
Turn the ignition to the ON position without starting the engine. Press the Select/Reset button repeatedly until the oil life indicator is displayed. Press and hold the Select/Reset button until the indicator begins to blink, then release and hold again until the indicator resets to 100%.
Ensure the vehicle is on a level surface and the engine is warm. Remove the dipstick from the transmission fluid reservoir, wipe it clean, reinsert it, and then remove it again to check the fluid level, which should be between the upper and lower marks.
The recommended tire pressure for the 2012 Honda Ridgeline is 32 psi for both the front and rear tires. Always check the owner's manual or the driver’s side door jamb for the most accurate information.
Locate the fuse box under the dashboard or in the engine compartment. Identify the blown fuse using the diagram on the fuse box cover. Use a fuse puller to remove the fuse and replace it with one of the same amperage.
Open the hood and locate the air filter housing. Unclip or unscrew the housing cover, remove the old air filter, and insert the new one. Ensure it fits snugly, then replace the cover and secure it in place.
To update the navigation system, purchase the latest map update from the Honda website or a dealership. Follow the included instructions, typically involving inserting a USB or DVD into the system and following on-screen prompts.
Possible causes include low refrigerant levels, a faulty compressor, or a clogged cabin air filter. Check refrigerant levels and inspect the compressor for issues. If necessary, consult a professional mechanic for diagnosis and repair.
The 2012 Honda Ridgeline has a towing capacity of up to 5,000 pounds when properly equipped. Ensure you have the appropriate towing package and adhere to all safety guidelines.
Open the hood and access the back of the headlight assembly. Remove the power connector and the rubber weather seal. Twist and remove the old bulb, insert the new bulb, and reassemble in reverse order. Ensure the bulb is securely in place before testing.