Honda Odyssey 2010 Technology Reference Guide
![Honda Odyssey 2010 Technology manual cover](/images/afb11ffe8ff49b4e89e42c48/thumbs/thumb175x175.webp)
To reset the maintenance light, turn the ignition to the ON position without starting the engine. Press the SELECT/RESET button until the oil life indicator is displayed. Hold the SELECT/RESET button for about 10 seconds until the oil life indicator and maintenance code blink. Release the button, then hold it again for an additional 5 seconds until the indicator resets to 100%.
The 2010 Honda Odyssey is recommended to use 5W-20 engine oil. It is vital to use the correct oil to ensure optimal engine performance and efficiency.
To pair your phone, ensure Bluetooth is enabled on your phone. Press the "Phone" button on the Odyssey's audio system, select "Yes" to pair a new phone, and search for "HandsFreeLink" on your phone. Enter the pairing code provided by the system, and confirm the connection on both your phone and the vehicle system.
Open the glove box and remove the damper by pushing in each side of the glove box until it drops down. Unclip the filter cover and slide out the old cabin air filter. Insert the new filter with the airflow direction arrow pointing downwards. Reattach the filter cover and glove box.
First, check if the system is powered on and if the rear control panel settings are correct. Inspect the fuses related to the entertainment system. Ensure that the DVD or auxiliary source is functioning properly. If issues persist, consult the vehicle's manual or seek professional assistance.
The recommended tire pressure for the 2010 Honda Odyssey is typically 33 psi for the front tires and 35 psi for the rear tires. However, it is important to check the sticker located on the driver’s side door jamb for the most accurate specifications.
To update the navigation system, purchase the latest map update from the Honda Navigation Center or an authorized dealer. Insert the update disc into the DVD slot and follow the on-screen instructions to complete the installation.
If the check engine light illuminates, ensure the gas cap is tight as a loose cap can trigger the light. If the light remains on, use an OBD-II scanner to read the error codes or seek assistance from a certified mechanic to diagnose and address the issue.
To replace a headlight bulb, open the hood and locate the back of the headlight assembly. Disconnect the power connector, remove the rubber weather seal, and unclip the bulb retainer. Replace the old bulb with a new one, ensuring not to touch the glass with bare hands. Reassemble in reverse order.
The primary fuse box is located under the dashboard on the driver's side. To access it, open the driver's door and remove the cover panel near the steering column. Another fuse box is located under the hood near the battery. Both boxes contain a diagram on the cover to identify each fuse.