Honda Insight EX with Navigation 2014 Technology Reference Guide
![Honda Insight EX with Navigation 2014 Technology manual cover](/images/b728e4e77c28660fdbce99ca/thumbs/thumb175x175.webp)
To pair your phone, go to the 'Settings' menu on the navigation screen, select 'Bluetooth', then 'Add Bluetooth Device'. Ensure your phone's Bluetooth is on and discoverable, then select your phone from the list of devices. Follow the prompts to complete pairing.
If the navigation system freezes, try restarting the car. If the issue persists, you may need to perform a system reset. Refer to the owner's manual for the reset procedure or consult a Honda dealer for assistance.
Map updates for the Honda Insight navigation system can be obtained through the official Honda website or directly from a Honda dealership. Follow the instructions provided with the update package to install the new maps.
The recommended maintenance schedule includes regular oil changes every 7,500 miles, tire rotations every 7,500 miles, and inspections of brake pads, fluids, and other critical components every 15,000 miles. Refer to the owner's manual for a detailed schedule.
To replace the cabin air filter, open the glove box and remove the dampener arm. Squeeze the sides of the glove box to release it fully, then remove the filter cover behind the glove box. Replace the old filter with a new one, ensuring it is oriented correctly, and reassemble.
If the battery is new and the car won't start, check the battery connections for corrosion or looseness. Also, ensure the transmission is in 'Park' for automatic or 'Neutral' for manual. If the problem persists, it may be an issue with the starter or alternator.
The 2014 Honda Insight EX typically requires 0W-20 synthetic oil. Always refer to the owner's manual for the manufacturer's recommendations and ensure the oil meets Honda's specifications.
To manually open the trunk, locate the trunk release lever inside the vehicle, usually near the driver's seat. If this fails, you may need to access the trunk through the rear seats by pulling the seat release levers and crawling through to open it manually.
Turn the ignition to the 'ON' position without starting the engine. Press the 'Trip' button until the maintenance message appears. Hold the button for about 10 seconds until the light begins to blink, then release and press again until the light resets.
To check the TPMS, turn the ignition to 'ON' and look for the TPMS indicator on the dashboard. If the light is steady, check and adjust the tire pressures to the recommended levels. If it blinks, there may be a system malfunction requiring dealer inspection.