Honda Insight 2011 Technology Reference Guide
![Honda Insight 2011 Technology manual cover](/images/457dff5f9b4d019a4490ce77/thumbs/thumb175x175.webp)
To reset the maintenance light, turn the ignition to the "ON" position. Press the "Select/Reset" button until the oil life indicator is displayed. Hold the "Select/Reset" button until the oil life begins to blink, then release the button. Press and hold the button again until the oil life resets to 100%.
The 2011 Honda Insight typically requires 0W-20 synthetic motor oil. It's important to use the recommended oil type to ensure optimal performance and fuel efficiency.
To improve fuel efficiency, ensure your tires are properly inflated, use the ECO mode for driving, minimize unnecessary weight in the vehicle, and keep up with regular maintenance such as oil changes and air filter replacements.
Unusual noises during acceleration could be due to several factors such as a loose belt, exhaust issues, or engine problems. It's best to have a qualified mechanic inspect the vehicle to diagnose and fix the issue.
To replace the cabin air filter, open the glove box and remove the damper. Press in on the sides of the glove box to release it. The cabin air filter is located behind the glove box; remove the old filter and insert a new one, ensuring it is oriented correctly.
If the battery is dead, you can jump-start the car using jumper cables and another vehicle. Connect the cables in the correct order: positive to positive, negative to negative, and start the assisting vehicle before attempting to start your Insight. Consider replacing the battery if the issue persists.
To check the transmission fluid, park the car on a level surface and let the engine warm up. Locate the transmission dipstick, remove it, and wipe it clean. Reinsert the dipstick, then remove it again to check the fluid level. Add fluid if necessary, ensuring not to overfill.
The check engine light can be triggered by various issues, such as a loose gas cap, oxygen sensor failure, or catalytic converter problems. Use an OBD-II scanner to read the error code or visit a mechanic for a diagnostic test.
For the 2011 Honda Insight, it is generally recommended to change the spark plugs every 60,000 miles. However, consult your owner's manual for specific intervals as they may vary based on driving conditions and maintenance history.
The recommended tire pressure for the 2011 Honda Insight is typically 32 PSI for both front and rear tires. Always check the label inside the driver's door for the most accurate and vehicle-specific information.