Honda Crosstour EX-L with Navigation 2014 Technology Reference Guide
![Honda Crosstour EX-L with Navigation 2014 Technology manual cover](/images/575dea2dcad9ded1b63eed38/thumbs/thumb175x175.webp)
To pair your phone, enable Bluetooth on your phone. On the navigation system, press the "Phone" button, then select "Settings" > "Bluetooth Device List" > "Add Bluetooth Device" and follow the prompts.
First, try restarting your vehicle, which can reset the system. If the problem persists, check for any available software updates or consult a dealer for assistance.
To update the maps, you need to purchase the latest map update from the Honda Navigation website or your Honda dealer, and follow the instructions provided with the update.
Refer to your owner's manual for the specific maintenance schedule, which typically includes regular oil changes, tire rotations, brake inspections, and fluid checks every 5,000 to 7,500 miles.
Inflate all tires to the recommended pressure. Start the vehicle and press the TPMS button located under the dashboard until the light blinks twice. Drive for a short distance to reset the system.
Maintain proper tire pressure, use cruise control when appropriate, avoid rapid acceleration and excessive idling, and ensure regular maintenance like oil changes and air filter replacements.
Ensure the gas cap is secured tightly. If the light remains on, consult a diagnostic tool or take the vehicle to a professional to retrieve the error codes and address the underlying issue.
Press and hold the desired HomeLink button and the remote control button simultaneously until the HomeLink indicator blinks rapidly. Then, press the HomeLink button to test the operation.
Check for any obstructions in the air vents, ensure the cabin air filter is clean, and verify the refrigerant level. If issues persist, consult a professional to inspect the system for leaks or other problems.
Access the back of the headlight assembly, disconnect the electrical connector, and remove the old bulb by turning it counterclockwise. Insert the new bulb, turn it clockwise to secure, and reconnect the electrical connector.