Honda Crosstour EX 2015 Technology Reference Guide
![Honda Crosstour EX 2015 Technology manual cover](/images/9cf668e8c9904572d7d975d6/thumbs/thumb175x175.webp)
To reset the oil life indicator, turn the ignition to the "ON" position without starting the engine. Press the "SELECT/RESET" button until the oil life indicator is displayed. Press and hold the "SELECT/RESET" button for about 10 seconds until the oil life indicator starts to blink. Release the button, then press and hold it again for another 5 seconds until the indicator resets to 100%.
The recommended tire pressure for the Honda Crosstour EX 2015 is 32 psi for both front and rear tires. Always check the tire pressure when the tires are cold for an accurate reading.
To pair your smartphone, ensure Bluetooth is enabled on your device. On the car's audio system, press the "Phone" button, then select "Yes" to pair a new device. Select your phone from the list of available devices and confirm the pairing code on both the phone and the car's display.
Honda recommends using 0W-20 synthetic oil for optimal performance and fuel efficiency in the Honda Crosstour EX 2015. Always ensure the oil meets the API certification standards.
To replace a headlight bulb, open the hood and locate the back of the headlight assembly. Disconnect the electrical connector from the bulb, then twist and remove the old bulb. Insert the new bulb without touching the glass and secure it by twisting it into place. Reconnect the electrical connector.
To check the transmission fluid level, park the vehicle on a level surface and start the engine. Allow it to reach normal operating temperature. Locate the transmission dipstick, remove it, wipe it clean, reinsert it, and then remove it again to check the level. Ensure the fluid is at the proper level indicated on the dipstick.
To improve fuel efficiency, maintain regular service intervals, ensure tires are properly inflated, avoid excessive idling, and drive at moderate speeds. Using cruise control on highways can also help maintain consistent speed and improve fuel economy.
Common causes of engine overheating include low coolant levels, a faulty thermostat, a malfunctioning radiator fan, or a clogged radiator. Regularly check the coolant level and inspect for leaks to prevent overheating issues.
To program a new key fob, insert the existing key into the ignition and turn it to the "ON" position. Press and hold the "LOCK" button on the new key fob for 1 second. Turn the key to the "OFF" position and repeat the process twice. After the third cycle, turn the key to "ON" and press the "LOCK" button again to complete the programming.
If the check engine light comes on, first check for any obvious issues such as a loose gas cap. If the light remains on, it's advisable to have the vehicle scanned for diagnostic trouble codes (DTCs) at a dealership or with an OBD-II scanner to identify the issue.