Honda Crosstour EX 2014 Technology Reference Guide
![Honda Crosstour EX 2014 Technology manual cover](/images/404687d9ac55007fb3bea100/thumbs/thumb175x175.webp)
To connect your smartphone, first ensure Bluetooth is enabled on your device. Then, on the vehicle's audio system, navigate to 'Settings' > 'Bluetooth' > 'Add Bluetooth Device'. Select your vehicle on your phone's Bluetooth list and confirm the pairing code displayed.
The recommended tire pressure for the Honda Crosstour EX 2014 is 32 psi for both the front and rear tires. Always check the vehicle’s manual or the sticker on the driver's side door jamb for the most accurate information.
To reset the maintenance light, turn the ignition to the ON position without starting the engine. Press the 'Select/Reset' button until the engine oil life indicator is displayed. Hold the button until the indicator starts to blink, then release it. Press and hold the button again until the indicator resets to 100%.
The Honda Crosstour EX 2014 typically requires 5W-20 synthetic oil. Always refer to your owner's manual to confirm the recommended oil type for your specific vehicle.
To replace a headlight bulb, open the hood and locate the back of the headlight assembly. Disconnect the power connector, remove the rubber weather seal, and unclip the bulb retainer. Replace the old bulb with a new one, then reassemble in the reverse order.
If your vehicle won't start with a new battery, check the battery connections for corrosion or looseness. Ensure the starter and alternator are functioning properly. It's also advisable to check the fuses and relays related to the starting system.
To update the GPS navigation, visit the official Honda navigation update website. You will need a USB drive with at least 8GB of space. Follow the instructions to download the update onto the USB and then insert it into the vehicle's USB port to install.
If the check engine light illuminates, first ensure the gas cap is tightly secured. If the light remains on, use an OBD-II scanner to retrieve error codes or visit a certified technician for diagnosis and repair.
To change the cabin air filter, open the glove box and remove any contents. Unhook the glove box from its fasteners and lower it. Remove the filter cover, slide out the old filter, and replace it with a new one. Reassemble in reverse order.
To improve fuel efficiency, maintain proper tire pressure, perform regular maintenance, use recommended oil, and avoid aggressive driving. Additionally, minimize the use of air conditioning and remove unnecessary weight from the vehicle.