Honda Crosstour 2012 Technology Reference Guide
![Honda Crosstour 2012 Technology manual cover](/images/65d7c0b4ebf19feab3296866/thumbs/thumb175x175.webp)
To connect your smartphone to the Honda Crosstour 2012 via Bluetooth, ensure Bluetooth is enabled on your phone. Then, press the 'Phone' button on the car's audio system, select 'Add Bluetooth Device', and follow the on-screen instructions to pair your phone.
The recommended oil type for the Honda Crosstour 2012 is 5W-20. It's best to use an oil that meets Honda's specifications for optimal engine performance.
To reset the maintenance light, turn the ignition to the 'ON' position without starting the engine. Press the 'Select/Reset' button until the oil life indicator is displayed. Hold the button until it blinks, then release and hold again until it resets to 100%.
To update the navigation system, you will need to purchase an update DVD from a Honda dealer or the official Honda Navigation Center website. Insert the DVD into the system and follow the on-screen instructions to complete the update.
The recommended tire pressure for the Honda Crosstour 2012 is 32 psi for both the front and rear tires. Always check the tire pressure when the tires are cold for an accurate reading.
To replace the cabin air filter, open the glove compartment and release the damper. Press in on both sides of the glove compartment to lower it completely. Remove the filter cover, take out the old filter, and insert the new one. Reattach the cover and glove compartment.
The Honda Crosstour 2012 has a towing capacity of 1,500 pounds. It's important to ensure that your load does not exceed this limit for safe towing.
To improve fuel efficiency, maintain proper tire pressure, perform regular maintenance such as oil changes and air filter replacements, and use cruise control on highways. Avoid aggressive driving, as it can significantly reduce fuel economy.
If the check engine light comes on, first ensure that the gas cap is tightly closed. If the light remains on, have the vehicle diagnosed by a professional to identify any issues that need to be addressed.
To change the headlight bulb, open the hood and locate the back of the headlight assembly. Disconnect the power connector, remove the rubber weather cover, and unclip the bulb. Insert the new bulb, secure the clip, reattach the cover and connector.