Honda CR-Z 2014 Technology Reference Guide

To reset the tire pressure monitoring system, ensure all tires are properly inflated first. Then, turn the ignition to the ON position, press the MENU button on the steering wheel, select Customize Settings, then TPMS Calibration, and finally select Initialize.
The 2014 Honda CR-Z requires 0W-20 synthetic oil for optimal performance and fuel efficiency. Ensure to check the oil level regularly and replace it as per the maintenance schedule.
To improve fuel economy, maintain proper tire pressure, follow the recommended maintenance schedule, avoid aggressive driving, and use the ECON mode for more efficient driving habits.
Common causes include a loose gas cap, faulty oxygen sensor, catalytic converter issues, or a malfunctioning mass airflow sensor. It's best to have the vehicle diagnosed with an OBD-II scanner for specific error codes.
Activate Bluetooth on your phone. In your CR-Z, press the PHONE button on the audio system, select Add Bluetooth Device, and follow the prompts to pair your phone by selecting your car's Bluetooth name on your phone's Bluetooth list.
The maintenance schedule includes oil changes every 7,500 miles, tire rotations every 7,500 miles, air filter replacement every 15,000 miles, and brake fluid replacement every 3 years. Refer to the owner’s manual for a detailed schedule.
Open the glove box and remove the limiting stop arm. Press the sides of the glove box inward to release it. You will see the cabin air filter cover; remove it and replace the old filter with a new one. Reassemble in reverse order.
The battery light indicates an issue with the charging system, potentially due to a faulty alternator, loose battery cables, or a failing battery. It's advisable to have the charging system inspected by a professional.
Check the battery connections and ensure they are clean and tight. If the battery is old, it may need replacing. Also, check the starter and alternator. If the problem persists, consult a mechanic for a thorough diagnostic.
To use cruise control, press the CRUISE button on the steering wheel. Accelerate to your desired speed, press the SET/DECEL button to set the speed, and use the RES/ACCEL button to increase speed or the CANCEL button to disengage.