Honda CR-Z 2011 Technology Reference Guide
![Honda CR-Z 2011 Technology manual cover](/images/c5b7ff2f735d2f07a1d36194/thumbs/thumb175x175.webp)
To reset the tire pressure monitoring system, turn the ignition to the ON position and press the TPMS button until the warning light blinks twice. This will recalibrate the system to the current tire pressures.
The 2011 Honda CR-Z requires 0W-20 synthetic oil for optimal performance and fuel efficiency. Ensure to use oil that meets Honda's standards.
To improve fuel efficiency, ensure regular maintenance, keep tires properly inflated, use ECO mode when driving, and avoid aggressive acceleration and braking.
To replace the cabin air filter, open the glove box, remove the damper arm, press in on the sides of the glove box to lower it fully, and then replace the filter located behind the glove box.
A squealing noise could be due to a worn-out serpentine belt. Inspect the belt for wear and replace it if necessary to eliminate the noise.
To connect your phone via Bluetooth, enable Bluetooth on your phone, and use the CR-Z's audio system to search and pair with your phone, following the on-screen instructions.
The recommended maintenance schedule includes oil changes every 7,500 miles, tire rotations every 7,500 miles, and brake inspections every 15,000 miles. Refer to the owner's manual for a detailed schedule.
If the hybrid system warning light is on, it is best to have the vehicle checked by a professional. However, ensure that all hybrid system connections are secure and check the voltage of the hybrid battery.
To change a flat tire, secure the vehicle on a flat surface, use the jack to lift the vehicle, remove the lug nuts, replace the flat tire with the spare, tighten the lug nuts, and lower the vehicle.
To replace the headlight bulb, open the hood, remove the electrical connector from the bulb, twist the bulb counterclockwise to remove it, and insert the new bulb, twisting it clockwise to secure it.