Honda Civic Coupe LX 2012 Technology Reference Guide
![Honda Civic Coupe LX 2012 Technology manual cover](/images/493ab3abe4be1e5a0ded269e/thumbs/thumb175x175.webp)
To pair your phone with the Bluetooth system, ensure your phone's Bluetooth is on, press the 'Phone' button on the Civic's console, then select 'Add a Device'. Follow the prompts on your phone and the vehicle's display to complete pairing.
First, check the cabin air filter for dirt or blockage. Ensure the AC settings are correct. If the problem persists, the system may need a refrigerant recharge or inspection by a professional for leaks or component failures.
Turn the ignition switch to 'ON'. Press the 'Select/Reset' button until the oil life indicator is displayed. Hold the button for 10 seconds until the indicator blinks, then release and hold again until it resets to 100%.
The recommended tire pressure for the 2012 Honda Civic Coupe LX is typically 32 psi for both front and rear tires. Always refer to the sticker on the driver’s side door jamb for the exact specifications.
Maintain proper tire pressure, perform regular engine tune-ups, replace air filters as needed, use recommended engine oil, and drive conservatively avoiding rapid acceleration and excessive idling.
The 2012 Honda Civic Coupe LX typically requires 0W-20 synthetic oil for optimal performance. Consult the owner’s manual for any updates or changes in recommendations.
With the car on a level surface and the engine warmed up, open the hood and locate the transmission dipstick. Pull it out, wipe it clean, reinsert and remove it to check fluid level and condition.
Knocking noises can be due to using low-octane fuel, carbon deposits, or worn engine components. It is advisable to have a professional mechanic diagnose the issue to prevent potential damage.
For optimal performance, spark plugs should generally be replaced every 30,000 to 60,000 miles. However, it's best to consult your owner’s manual for the manufacturer’s specific recommendations.
The check engine light can illuminate for various reasons, from a loose gas cap to engine misfires. It's best to use an OBD-II scanner or visit a mechanic to diagnose the specific issue.