Honda Civic Coupe EX EX-L and Si 2014 Technology Reference Guide
![Honda Civic Coupe EX EX-L and Si 2014 Technology manual cover](/images/665deef0ed98fb2ff54ab466/thumbs/thumb175x175.webp)
To pair your phone, ensure Bluetooth is enabled on your device. On the Civic's touchscreen, select 'Settings,' then 'Bluetooth.' Choose 'Add Bluetooth Device' and follow the prompts on both the screen and your phone.
Honda recommends regular maintenance every 7,500 miles or 12 months, including oil changes, tire rotations, and inspections of brakes and other key components. Refer to the owner's manual for detailed intervals.
Turn the ignition to the ON position without starting the engine. Use the steering wheel controls to select the menu screen, then go to 'Vehicle Settings.' Select 'Maintenance Info' and choose 'Reset' to clear the maintenance minder.
The 2014 Honda Civic EX-L is recommended to use 0W-20 full synthetic oil for optimal performance and fuel efficiency.
First, check the A/C fuse in the fuse box. If it's intact, examine the refrigerant level; low levels may require a recharge. If issues persist, a professional diagnostic is recommended to check for leaks or compressor issues.
Common causes include a loose gas cap, faulty oxygen sensor, or issues with the catalytic converter. It's best to use an OBD-II scanner to read the specific error code for accurate troubleshooting.
Open the glove box and detach the dampener arm. Squeeze the sides of the glove box inward to lower it completely. Remove the filter cover, replace the old filter with a new one, and reassemble in reverse order.
First, replace the battery in the key fob. If it still doesn't work, try reprogramming it by inserting the key into the ignition, turning it to the ON position, and pressing the lock button on the fob. Repeat this step three times.
Maintain proper tire pressure, use recommended oil, avoid rapid acceleration, and keep up with regular maintenance such as air filter and spark plug replacements to enhance fuel efficiency.
Open the hood and locate the back of the headlight assembly. Remove the power connector and the rubber weather seal. Unclip the old bulb, replace it with a new one, and reassemble, ensuring not to touch the glass of the new bulb.