Honda Accord Coupe LX-S with Navigation 2014 Technology Reference Guide
![Honda Accord Coupe LX-S with Navigation 2014 Technology manual cover](/images/79c5f09f767b75c20af5581f/thumbs/thumb175x175.webp)
To reset the navigation system, press and hold the power button for about 10 seconds until the system reboots. If that does not work, you may need to disconnect the battery for a few minutes and then reconnect it.
Honda recommends using 0W-20 synthetic oil for optimal performance and fuel efficiency in the 2014 Accord Coupe LX-S.
To improve fuel efficiency, ensure regular maintenance is performed, keep tires properly inflated, avoid excessive idling, and drive at a constant speed. Use cruise control on highways when possible.
If the navigation screen goes blank, try restarting the system by turning the car off and on. If the problem persists, check the fuses related to the navigation system and consult a professional if needed.
It is generally recommended to change the transmission fluid every 60,000 to 90,000 miles. However, refer to the owner's manual for specific intervals for your driving conditions.
The recommended tire pressure for the 2014 Honda Accord Coupe LX-S is typically 32 psi for both front and rear tires. Always check the label on the driver's side door jamb for the exact specifications.
Enable Bluetooth on your smartphone and select 'Phone' on the vehicle's touchscreen. Go to 'Bluetooth Setup' and select 'Add Bluetooth Device.' Follow the prompts to complete pairing.
Ceramic brake pads are a popular choice for the 2014 Honda Accord Coupe LX-S due to their durability and low noise. It's best to choose OEM or high-quality aftermarket options.
To update the navigation maps, visit Honda's official navigation update website, purchase the latest map update, and follow the instructions provided to install it via USB or SD card.
The check engine light can be triggered by various issues such as a loose gas cap, faulty oxygen sensor, or issues with the catalytic converter. It is advisable to have the vehicle scanned for trouble codes to pinpoint the exact cause.