Honda Accord Coupe EX and EX-L 2013 Technology Reference Guide
![Honda Accord Coupe EX and EX-L 2013 Technology manual cover](/images/ee86a0933b59a5306c1a5f5f/thumbs/thumb175x175.webp)
To pair your phone, first ensure Bluetooth is enabled on your phone. Press the 'Phone' button on the audio system, then select 'Yes' to add a new device. Follow the prompts on the screen and on your phone to complete the pairing process.
The recommended tire pressure for the 2013 Honda Accord Coupe EX is typically 32 psi for both front and rear tires. Always check the placard located on the driver's side door jamb for confirmation.
To reset the maintenance light, turn the ignition to the 'ON' position without starting the engine. Press the 'Select/Reset' button until the oil life indicator is displayed. Hold the button until the display blinks, then release and hold again until it resets to 100%.
The 2013 Honda Accord Coupe EX is recommended to use 0W-20 synthetic oil for optimal performance and fuel efficiency. Always refer to your owner's manual for verification.
Open the glove box and remove the damper arm from the right side. Press inwards on the sides of the glove box to lower it completely. Remove the cabin filter cover and replace the old filter with a new one, ensuring it is properly aligned.
A squeaking noise may indicate that the brake pads are worn and need replacement. It could also be due to dirt or debris between the brake pads and rotors. Inspect the brakes and clean or replace components as necessary.
First, try resetting the system by turning the car off and back on. If the issue persists, check the system's fuse and replace if necessary. Refer to the owner's manual for further troubleshooting steps and fuse location.
To improve fuel efficiency, ensure your tires are properly inflated, use the recommended grade of motor oil, remove excess weight from your vehicle, and drive conservatively by avoiding rapid acceleration and excessive idling.
Park the car on a level surface and start the engine. Shift through all gears and return to park. Locate the transmission dipstick, remove it, wipe it clean, reinsert it fully, then remove again to check the fluid level. Add fluid if necessary.
Visit the official Honda website to check for available updates. Follow the instructions to download the update onto a USB drive. Insert the USB into the car’s port and follow the on-screen prompts to install the update.