Honda Accord Coupe 2010 Technology Reference Guide
![Honda Accord Coupe 2010 Technology manual cover](/images/f2e70c0deb6a83ea4e96ec10/thumbs/thumb175x175.webp)
The recommended engine oil for a Honda Accord Coupe 2010 is 5W-20. It is important to use a high-quality oil that meets the API certification standards.
To reset the maintenance minder, turn the ignition to the "ON" position without starting the engine. Press the "Select/Reset" button until the oil life shows, then press and hold the button until the oil life blinks. Release and press the button again to reset.
The recommended tire pressure for the Honda Accord Coupe 2010 is 32 psi for both front and rear tires. Always check and adjust the tire pressure when the tires are cold.
First, check the fuses and relays related to the air conditioning system. If they are intact, ensure the refrigerant level is adequate. If the issue persists, it might require a professional diagnosis to check the compressor or other components.
Common causes include a loose gas cap, faulty oxygen sensors, spark plug or ignition coil issues, and problems with the catalytic converter. A diagnostic scan tool can help identify the specific issue.
To improve fuel efficiency, ensure regular maintenance is performed, including air filter changes and proper tire inflation. Avoid aggressive driving, and reduce excess weight in the vehicle.
To replace the battery, remove the key from the key fob, then use a small screwdriver to pry open the fob. Replace the old battery with a new CR1616 battery, ensuring the polarity is correct. Snap the fob back together.
The timing belt should be replaced every 60,000 to 100,000 miles. It is crucial to follow the manufacturer's recommendations to avoid engine damage.
To change the transmission fluid, lift the vehicle and drain the old fluid from the transmission pan. Replace the transmission pan gasket if necessary, then refill with new Honda ATF-Z1 or DW-1 fluid. Consult the owner's manual for the correct procedure and fluid amount.
To pair your phone, ensure Bluetooth is enabled on your device. Press the "Phone" button on the car's audio system, then select "Add a Device." Follow the prompts, and enter the passcode when prompted to complete the pairing process.