Flymo EasiStore 300R Li Operator's Manual
![Flymo EasiStore 300R Li manual cover](/images/3a654b3aef70f8a783ea8977/thumbs/thumb175x175.webp)
To start the Flymo EasiStore 300R Li, ensure the battery is fully charged and inserted correctly. Press and hold the safety button, then pull the start lever towards the handle.
Check that the battery is charged and properly installed. Ensure the safety key is inserted. Verify that the start lever is pulled fully towards the handle. If issues persist, consult the user manual or contact customer support.
Adjust the cutting height to a higher setting to avoid scalping. Mow at a slower pace, and consider mowing in multiple directions for a more even cut.
Regularly clean the mower deck and blades to prevent grass build-up. Check the blade for sharpness and replace it if dull. Inspect the battery for damage and store it in a dry, cool place when not in use.
The cutting height can be adjusted using the height adjustment lever located on the side of the mower. Move the lever to the desired height setting.
Ensure the blade is sharp and not damaged. Check that the cutting height is set appropriately for the grass length. Mow at a steady pace and overlap each pass slightly.
Clean the mower thoroughly, removing any grass and debris. Charge the battery and store it separately in a cool, dry place. Keep the mower in a dry, sheltered area to protect it from moisture.
Ensure the battery is fully charged before use. Avoid mowing in overly thick or wet grass, which can drain the battery faster. If the issue persists, the battery may need replacing.
It is recommended to inspect the blade regularly and replace it annually or sooner if it shows signs of wear or damage.
It is not recommended to mow wet grass as it can lead to poor cutting performance and may clog the mower. Wait until the grass is dry for best results.