Drayton Biflo PBBE66S Installation Guide
![Drayton Biflo PBBE66S Controller manual cover](/images/ngLteZHnLHzUclqHqdirsfAj/thumbs/thumb175x175.webp)
To reset the Drayton Biflo PBBE66S Controller, locate the reset button on the unit, press and hold it for 5 seconds until the display turns off and then back on, indicating a successful reset.
First, check the power supply to ensure the unit is powered. If the issue persists, try resetting the controller. If it still does not respond, consult the troubleshooting section of the user manual.
To program the heating schedule, press the 'Program' button, use the arrow keys to set the desired time and temperature, and save the settings by pressing 'Enter'. Refer to the user manual for detailed steps.
Regularly clean the unit's exterior with a soft cloth to prevent dust buildup. Check connections and ensure the unit is free from obstructions or blockages. Conduct a system test bi-annually to ensure optimal performance.
Press the 'Mode' button on the controller to toggle between manual and auto modes. The display will indicate the current mode. Consult the manual for further instructions if needed.
Error codes can indicate issues such as sensor failures or connectivity problems. Refer to the error code section in the user manual for specific resolutions or contact customer support for assistance.
Yes, the controller can be integrated with compatible smart home systems. Refer to the integration guide for setup instructions and supported systems.
Use the 'Temperature' buttons to increase or decrease the desired temperature. The current setting will be displayed on the screen. Confirm changes by pressing 'Enter'.
Ensure the controller is in the correct mode and the schedule is properly set. Check for any obstructions near the temperature sensors and ensure the system components are functioning correctly.
To lock the settings, activate the 'Child Lock' feature by pressing and holding the 'Lock' button for 3 seconds until the lock icon appears on the display.