Doro 1350 Quick Start Guide

To insert the SIM card, turn off your phone and remove the back cover. Carefully lift out the battery and insert the SIM card into the SIM slot with the gold contacts facing down. Reinsert the battery and replace the back cover.
During a call, use the side volume buttons to increase or decrease the call volume.
Ensure the charger is properly connected to both the phone and a working power outlet. Check for any visible damage to the charging cable or port. If the issue persists, try using a different charger or battery.
To reset the phone, go to Menu > Settings > Security > Reset settings. Enter your security code (default is 1234) and confirm to reset the phone to factory settings.
To activate the flashlight, press and hold the flashlight button located on the side of the phone until it turns on. Release the button to turn it off.
Ensure your SIM card is properly inserted and the phone is within network coverage. Check your phone settings to ensure it's not in Airplane mode and that call blocking or divert options are not enabled.
To add a contact, go to Menu > Phonebook > Add. Enter the contact's name and phone number, then save the contact.
If the screen is frozen, try removing the battery and waiting for a few seconds before reinserting it. Turn the phone back on. If the problem persists, consider performing a factory reset.
Yes, the Doro 1350 supports microSD cards for additional storage. To insert a microSD card, remove the back cover and battery, then insert the card into the designated slot.
To turn on the speakerphone, press the loudspeaker button during a call. Press it again to turn off the speakerphone.