Dimplex Vital DVLS85 Instruction Manual
![Dimplex Vital DVLS85 Shower manual cover](/images/HskTlNwwOOOBnnGhQPSapCdr/thumbs/thumb175x175.webp)
To adjust the water temperature, turn the temperature control knob clockwise for cooler water and counterclockwise for warmer water. Allow a few seconds for the temperature to stabilize after adjustment.
First, ensure that the power supply is connected and the circuit breaker is not tripped. Check if the temperature setting is correctly adjusted. If the problem persists, inspect the heating element or contact a qualified technician.
Detach the showerhead and soak it in a solution of equal parts water and white vinegar for about an hour. Rinse thoroughly and use a soft brush to remove any mineral deposits. Reattach the showerhead securely.
Check if the showerhead or the inlet filter is clogged with debris or mineral deposits. Clean both components thoroughly. If the issue continues, inspect the pressure relief device for any blockages.
Conduct a routine check every six months. Inspect the showerhead and hose for blockages, clean the inlet filter, and check all electrical connections for safety. Replace any worn-out parts as needed.
Regularly clean the showerhead and use a water softener if your home has hard water. Also, consider installing a limescale filter for the shower unit to reduce mineral deposits.
Identify the source of the leak, whether it's the hose, showerhead, or unit itself. Tighten any loose connections and replace damaged washers or seals. If the leak persists, consult a professional technician.
Turn off the shower unit and disconnect it from the power supply. Wait for a few minutes before reconnecting the power and turning the unit back on. Check if the shower resumes functioning.
Signs include inconsistent water temperatures, no hot water, or the unit tripping the circuit breaker. If these issues occur, inspect the heating element and replace it if damaged.
While the unit comes with an installation manual, it is recommended to have a qualified electrician or plumber perform the installation to ensure safety and compliance with local regulations.